Crate Amplifiers GTD15R user manual

Summary of the content on the page No. 1

GTD15R
Guitar Amplifier
Owner’s Manual

Summary of the content on the page No. 2

GTD15R Guitar Amplifier Congratulations and thank you for choosing the Crate GTD15R Guitar Amplifier. This rugged amplifier combines outstanding features with serious clean and distorted sounds. The built-in spring reverb provides that classic reverb sound for added depth and greater flexibility. A stereo mini-jack input allows connection of a CD or tape player for playing along with your favorite music, and the headphones jack lets you practice in private. In order to get the most out of yo

Summary of the content on the page No. 3

GTD15R Guitar Amplifier The Front Panel: 10 1 2 3 4 5 6 7 8 9 11 12 13 1. INPUT: Use this jack to connect your power amp circuit. Use the output level con- guitar to the amplifier by means of a shield- trol for the signal source to adjust the signal ed instrument cable. for the proper mix with your guitar. OVERDRIVE CHANNEL: A high gain channel Note: Depending on your CD player or other giving you sounds from a slight edge to seri- signal source device, you may need to use an ous overdrive.

Summary of the content on the page No. 4

GTD15R Guitar Amplifier GTD15R TECHNICAL SPECIFICATIONS: Output Power Rating 15W rms @ 5% THD, 4Ω, 120 VAC Gain Overdrive Ch 86 dB ±6 dB @ 1 kHz Clean Ch 46 dB ±6 dB @ 1 kHz CD Input 26 dB ±2 dB Maximum Input Signal Accepted 2.2 volts rms @ 400 Hz Tone Controls Low 25 dB range @ 80 Hz Mid 19 dB range @ 900 Hz High 23 dB range @ 5 kHz Signal To Noise Ratio Overdrive Ch >50 dB Clean Ch >65 dB Speaker Size and Rating 12" Crate Custom Design 4 ohm Power Requirements 120 VAC, 60 H