Summary of the content on the page No. 1
SX60m
60W Mono-Aural Power Amplifier
Owners Manual
Summary of the content on the page No. 2
Perreaux Industries Limited makes no warranty for the use of its products, other than those expressly contained in the warranty detailed herein. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change products or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Pe
Summary of the content on the page No. 3
This page has intentionally been left blank. 2
Summary of the content on the page No. 4
i Introducing the Perreaux Silhouette Series Designed as a range of high quality, yet affordable modules; the ‘Silhouette’ series will compliment and enhance your existing system. Drawing on our extensive knowledge gained from more than a quarter of a century of developing highest quality audio products, the ‘Silhouette’ concentrates our legendary design and build quality into a compact package without sacrificing performance. The Perreaux ‘Silhouette’ series provides performance l
Summary of the content on the page No. 5
ii Important Safety Instructions Note: Please read all instructions carefully before attempting to operate your Perreaux “Silhouette” SX60m Mono-Aural Power Amplifier. ALWAYS switch off power to your system before attempting to connect or disconnect cables. ALWAYS disconnect your system from the mains before attempting to clean your unit. ALWAYS keep electrical equipment out of reach of children. ALWAYS unplug sensitive electronic equipment during electrical storms. NEVER disconn
Summary of the content on the page No. 6
iii Table of Contents i Introducing the Perreaux Silhouette Series.................................... 3 ii Important Safety Instructions............................................................ 4 iii Table of Contents................................................................................. 5 1 Unpacking and Placement................................................................. 6 2 Instant Install............................................................................
Summary of the content on the page No. 7
1 Unpacking and Placement Unpacking The SX60m is packaged for maximum protection. To open, sit Procedure the box upright and cut the reinforced tape at the top of the box. The product can now be removed. Pull the foam protecting end-caps off either side of the unit and remove the black material covering. The SX60m Mono-Aural power amplifier is now unpacked and ready for further installation. Note: Please retain all packaging material for future transport. Box 1 x SX60m Mono-Aural
Summary of the content on the page No. 8
2 Instant Install If you are like us, the first thing you will want to do is to play your favourite piece of music through your new SX60m. The following instructions are written to enable you to achieve this as quickly as possible. These are not comprehensive instructions, but are designed to enable you to play music now! Note: Please take the time to read the SX60m manual thoroughly as it incorporates many features, which will enhance its operation. Placement The SX60m is a
Summary of the content on the page No. 9
Switch on SX60m Caution! Prior to connecting the AC mains, please check the voltage label on the rear panel to ensure that your unit conforms to the power supply in your area. Never attempt to connect the unit to the incorrect voltage. Insert the power cord supplied into the rear of the SX60m and into the wall. Switch on the socket at the wall and turn on the power of the SX60m by setting the power switch down. Switch on preamplifier and source component Turn on the preamplif
Summary of the content on the page No. 10
3 Front Panel Functions Power LED This blue LED indicates the power status of your SX60m Mono- Aural Power Amplifier. 9
Summary of the content on the page No. 11
4 Rear Panel Functions Unbalanced Input and Output Unbalanced Input from preamplifier, accepts a standard unbalanced input (RCA). The input connection is the uppermost connector, indicated by red inner ring. Line Output to other amplifiers (e.g. bi-amping), accepts a standard unbalanced input (RCA). For more information on Line Input and Output specifications, please refer to Chapter 11. Caution! Never apply signal to the Balanced and Unbalanced inputs simultaneously. Bal
Summary of the content on the page No. 12
For more information on line input specifications, please refer to Chapter 11. Note: Please refer to the operating manual of your preamplifier to verify that the pin assignments of the balanced output connectors correspond to the SX60m balanced inputs. In the event that they are not compatible, the interconnecting cable will need to be altered to suit. Balanced Output Balanced Output to other amplifiers (e.g. bi-amping), accepts a standard balanced connector (XLR). The pin ass
Summary of the content on the page No. 13
Serial Number/Voltage Label The serial number is unique to your SX60m. Please record this number and store it in a safe place. For any service related enquiry, please be prepared to quote the product serial number to Perreaux personnel or their service representative. The voltage displayed in this area is the ONLY voltage that can be accepted by the unit. Caution! Never attempt to connect the unit to the incorrect voltage. On/Off Switch When operating the switch down, powe
Summary of the content on the page No. 14
5 Special Design Philosophies Perreaux has been designing and manufacturing only the highest quality audio componentry for more than a quarter of a century. Technology has continued to evolve rapidly over that time and our knowledge and application of design, materials and manufacturing techniques has advanced in tandem with this. Today’s Perreaux range comes closer to fulfilling our shared vision than at any other time in the past. The SX60m has been developed to meet customer d
Summary of the content on the page No. 15
Minimalist Aesthetics Our products appeal to those who seek the ultimate in audio exclusivity, namely the perfect blend of “form and function”. “Form and function” are both tough masters. We make no excuses for producing some of the most distinctive high-end audio products on the planet. We let “form and function” blend together in perfect harmony. This surely is the essence of true minimalist utilisation. Minimalism in a Wider Context John Pawson writes: “Clearly simplicity has
Summary of the content on the page No. 16
6 Special Design Features Construction The SX60m is stylish and unobtrusive. The front panel is made from high quality solid 6.0mm (0.2”) thick aluminium extrusion featuring our trademark machined Perreaux logo and large volume control knob. These are finished in durable and stylish satin chrome finish electroplate. On/off status is provided via a discreet blue LED inset into the front panel. The chassis and cover are both manufactured from heavy gauge steel. No cover fixing scr
Summary of the content on the page No. 17
Finest The SX60m features a 98VA toroidal mains transformer directly Quality soldered to the PCB, Wima and Elna capacitors, highest quality Components Zobel network and customized internal heat sink solution. The Used PCB is double-sided and constructed from the highest quality Throughout fibreglass base stock featuring 2oz copper. The Power Perreaux has specially developed a fully shielded 98VA internal Supply toroidal based power supply. No fewer than eight filter capacitors a
Summary of the content on the page No. 18
7 Care and Maintenance Note: Please switch the unit off and remove the cord set from the rear of the Amplifier before attempting to clean your SX60m in the manner described below. Never apply liquid directly to the SX60m. Never use abrasives. Never rub in a circular motion. Cover The cover features a durable high quality powder coat finish. To remove finger marks and dirt, lightly rub the surface with a soft cloth. If the dirt is not removed, dip your cloth in a mild solution of
Summary of the content on the page No. 19
8 Warranty Information 1 Year The Perreaux SX60m is warranted free from defects in material Limited and workmanship under normal use for a period of 1-year (365 Warranty days) from the date of purchase. To extend the warranty of the Perreaux SX60m to three (3) years from date of purchase, please return a fully completed warranty registration form along with a copy of the original receipt of purchase to: Perreaux Industries Ltd PO Box 305 Mosgiel Dunedin 9032 New Zealand F
Summary of the content on the page No. 20
9 Extended Warranty Registration Form Please complete this form and either fax, mail or e-mail it, along with a copy of the original receipt, to Perreaux Industries Ltd. Fax: +64 3 489 2976 Mail: Perreaux Industries Ltd PO Box 305 Mosgiel Dunedin 9032 New Zealand E-mail: info@perreaux.com Alternatively, complete the online Warranty Registration Form on our website – www.perreaux.com. 3 Year Extended Warranty Form Name: Address: Suburb: C
