Extron electronic Fiber Optic Transmitter-Receiver Pair FOX 500 DVI Rx user manual

Summary of the content on the page No. 1

Specifications — FOX 500 DVI Series
N The FOX 500 DVI consists of a transmitter (FOX 500 DVI Tx) and a receiver (FOX 500 DVI Rx)
with one or two fiber optic cables linking the two units. They are available in singlemode or
multimode versions.
N The analog audio signal(s) is (are) digitized in the transmitter, sent through the fiber cable, and
converted back to analog audio in the receiver.
N These transceivers are class 1 laser products. They meet the safety regulations of IEC-60825,
FDA 2

Summary of the content on the page No. 2

Header, cont’d Video output — receiver (FOX 500 DVI Rx) Number/signal type ��������������������� 1 DVI-D (or HDMI*) Connectors ������������������������������������� 1 female DVI-I Nominal level �������������������������������� 0�8 Vp-p Impedance �������������������������������������� 75 ohms Video delay ������������������������������������ 1-2 frames Audio Gain Range ���������������������������������� Adjustable, -18 dB to +10 dB Default Captive screw connector Unbalanced output: -6 dB; balanc

Summary of the content on the page No. 3

Serial control pin configurations � Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND Mini stereo jack: tip = Tx, ring = Rx, sleeve = GND ® Program control ����������������������������� Extron’s control/configuration program for Windows ™ Extron’s Simple Instruction Set (SIS ) General Power ���������������������������������������������� 100 VAC to 240 VAC, 50-60 Hz, 11 watts, internal Temperature/humidity ���������������� Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing