Summary of the content on the page No. 1
AVR 7550HD OM cover.qxd 2/25/09 10:44 AM Page 3
AVR7550HD
AUDIO/VIDEO RECEIVER
OWNER’S MANUAL
Summary of the content on the page No. 2
AVR 7550HD OM.qxd 2/25/09 11:52 AM Page 2 SAFETY INFORMATION IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. The A/V receiver’s cabinet may be cleaned by gently wiping with a soft cotton or microfiber cloth. Do not use water or any liquid cleaners. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do n
Summary of the content on the page No. 3
AVR 7550HD OM.qxd 2/25/09 11:52 AM Page 3 SAFETY INFORMATION a variety of factors beyond our control, including the nature of the finish, IMPORTANT SAFETY INFORMATION cleaning materials used, and normal heat and vibration caused by the Verify Line Voltage Before Use use of the product, or other factors. We recommend that caution be exer- cised in choosing an installation location for the component and in normal Your AVR 7550HD has been designed for use with 120-volt AC current. maintenance pr
Summary of the content on the page No. 4
AVR 7550HD OM.qxd 2/25/09 11:52 AM Page 4 TABLE OF CONTENTS 2 SAFETY INFORMATION 41 Manual Speaker Setup 5 INTRODUCTION 44 Audio Effects 7 FRONT-PANEL CONTROLS 45 Video Adjustments 9 REAR-PANEL CONNECTIONS 47 Multizone Operation 12 MAIN REMOTE CONTROL 47 System Settings FUNCTIONS 48 Advanced Remote Control Functions 15 ZONE 2 REMOTE CONTROL 51 Processor Reset FUNCTIONS 51 Memory 17 INTRODUCTION TO HOME THEATER 52 TROUBLESHOOTING GUIDE 18 CONNECTIONS 53 APPENDIX 18 Speaker Connections 67 Trade
Summary of the content on the page No. 5
AVR 7550HD OM.qxd 2/25/09 11:52 AM Page 5 INTRODUCTION Please register your AVR 7550HD at Harman Kardon AVR 7550HD 7.2-Channel www.harmankardon.com. Audio/Video Receiver NOTE: You’ll need the product’s serial number. At the same Audio Section time, you can choose to be notified about new products and/or • 105 Watts x 7, seven channels driven at full power at 8 ohms, special promotions. 20Hz – 20kHz, <0.07% THD, 735 watts total ® Thank you for choosing a Harman Kardon • High-current capabilit
Summary of the content on the page No. 6
AVR 7550HD OM.qxd 2/25/09 11:52 AM Page 6 INTRODUCTION Audio Inputs Ease of Use ® ™ • AM/FM/XM * tuner • EzSet/EQ II automated setup (microphone supplied) • Analog Audio 1 through 5 • Full-color user interface and setup menu, generated in high-definition video • Front-panel Analog Audio • Text-based on-screen menus available to Zone 2 • 6-/8-Channel Analog Audio • Two-line dot-matrix front-panel display Audio/Video Inputs • Color-coded connections • Three Analog Video • Programmable, learni
Summary of the content on the page No. 7
AVR 7550HD OM.qxd 2/25/09 11:52 AM Page 7 FRONT- PANEL CONTROLS 7 Volume Power Remote Message Display Indicator IR Sensor USB Main Power AVR Resolution Video Source Back/Exit OK USB Port Digital Video Inputs EzSet/EQ II Switch Settings Audio Inputs (S- and Composite Microphone Modes List (Optical and Front) Input Standby/On Info Audio Surround Menu / Headphone Analog Audio / Coaxial Front) Navigation Switch Settings Effects Modes Jack Front Inputs NOTE: To make it easier to follow the instruc
Summary of the content on the page No. 8
AVR 7550HD OM.qxd 2/25/09 11:52 AM Page 8 FRONT- PANEL CONTROLS Power Indicator: This LED has three possible modes: Menu Button: Press to display the menus for the tuner, the USB device, The Bridge II, the Network or Internet Radio, when any • Main Power Off: When the AVR is unplugged or the Main of those sources is in use. Power Switch is off, this LED is off. Back/Exit: Press this button to return to the previous menu, • Standby: Amber indicates that the AVR is ready to be turned on. or to
Summary of the content on the page No. 9
AVR 7550HD OM.qxd 2/25/09 11:52 AM Page 9 REAR- PANEL CONNECTIONS 9 Remote IR Output Trigger Outputs Optical 1, 2 & 3 Coaxial Digital 1 & 2 Digital Audio Audio Output Network Remote IR Carrier IR Input Output 6-/8-Channel Coaxial 1, 2 & 3 Optical Digital HDMI Monitor Inputs Digital Audio Audio Output Output HDMI 1, 2, 3 & 4 Zone 2 S-Video XM Antenna IR Input RS-232 Port 1, 2 & 3 COAXIAL 1 COAXIAL 2 COAXIAL 3 COAXIAL OUT FL SL CENTER SBL NETWORK 6/8 CHANNEL INPUT MONITOR CARRIER 1 2 IN IN OUT
Summary of the content on the page No. 10
AVR 7550HD OM.qxd 2/25/09 11:52 AM Page 10 REAR- PANEL CONNECTIONS IR receiver to the Remote IR Input jack. The Remote IR Output may 6-/8-Channel Inputs: Connect the multichannel analog ™ be connected to the Remote IR Input of a compatible product to audio outputs of a non-HDMI player (DVD-Audio, SACD , Blu-ray ™ enable remote control through the AVR. Disc or HD-DVD, or any other external decoder) to these jacks. Remote IR Carrier Output: This output is similar in Coaxial 1/2/3 and Optical 1/
Summary of the content on the page No. 11
AVR 7550HD OM.qxd 2/25/09 11:52 AM Page 11 REAR- PANEL CONNECTIONS Fan Vents: This area contains vents used by the AVR 7550HD’s Preamp Outputs: Connect these jacks to an external fan to cool the system. Maintain a clearance of at least 3 inches amplifier if more power is desired. The Surround Back/Zone 2 from the nearest surface to avoid overheating the unit. It is normal Preamp Outputs may be used with an external amplifier to power for the fan to remain off at most normal volume levels. An
Summary of the content on the page No. 12
AVR 7550HD OM.qxd 2/25/09 11:52 AM Page 12 MAIN REMOTE CONTROL FUNCTIONS IR Transmitter Lens AVR Power Off Device Power On AVR Power On Device Power Off LCD Display Source Selectors Video Modes Audio Effects Surround Modes Alphanumeric Keys Last Activity Back/Exit Menu Navigation OK Disc Menu Light Soft Keys Volume Channel Mute Transport Controls Record Info Settings Source Settings Sleep Settings AVR Settings/Remote Menu Zone Selector NOTE: To make it easier to follow the instructions throug
Summary of the content on the page No. 13
AVR 7550HD OM.qxd 2/25/09 11:52 AM Page 13 MAIN REMOTE CONTROL FUNCTIONS The AVR 7550HD remote is capable of controlling up to 14 devices, LCD Display: This two-line text display informs you of the including the AVR itself, an iPod docked in the included The Bridge II, current device mode (i.e., which source is active) on the upper line. a USB device and a Network device (see page 37 for details). During When you press a key, the command will appear briefly on the the installation process, y
Summary of the content on the page No. 14
AVR 7550HD OM.qxd 2/25/09 11:52 AM Page 14 MAIN REMOTE CONTROL FUNCTIONS Light: Press to illuminate the buttons on the remote. Press it again to turn the back light off, or wait 10 seconds after the last button press for the light to turn off on its own. Disc Menu: While a DVD is playing, press the DVD Source Selector, then this button, to display the disc’s menu. Soft Keys: These buttons are used to select sources A, B, C and D (see note on page 13), or for other functions with some source
Summary of the content on the page No. 15
AVR 7550HD OM.qxd 2/25/09 11:52 AM Page 15 ZONE 2 REMOTE CONTROL FUNCTIONS IR Transmitter Power Off Mute USB Source Selectors Network Sleep Settings AVR Settings BACK/EXIT MENU Back/Exit Menu Navigation OK Volume Controls Transport Controls Zone Selector Zone Indicator NOTE: To make it easier to follow the instructions throughout the manual that refer to this illustration, a copy of this page may be downloaded from the Product Support section at www.harmankardon.com. 15
Summary of the content on the page No. 16
AVR 7550HD OM.qxd 2/25/09 11:52 AM Page 16 ZONE 2 REMOTE CONTROL FUNCTIONS The Zone 2 remote control is used in the remote zone of a multizone Menu Button: This button is used within the Now Playing system with an IR receiver connected to the Zone 2 IR Input or an menu for the tuner (including XM Radio), USB, The Bridge II, Internet A-BUS device. It may be used to control the power, volume and Radio and the Network, and to display the main menu on some mute functions or to select a source in
Summary of the content on the page No. 17
AVR 7550HD OM.qxd 2/25/09 11:52 AM Page 17 INTRODUCTION TO HOME THEATER This introductory section will help you to familiarize yourself with power of an explosion, adding realism and excitement to your some basic concepts unique to multichannel surround sound home theater. Some people use two subwoofers, for additional receivers, which will make setup and operation smoother. power and even distribution of the sound. Typical Home Theater System Surround Modes A home theater typically includes
Summary of the content on the page No. 18
AVR 7550HD OM.qxd 2/25/09 11:52 AM Page 18 CONNECTIONS There are different types of audio and video connections used Subwoofer to connect the receiver, the speakers, the video display, and the The subwoofer is dedicated to the low frequencies (bass), which source devices. The Consumer Electronics Association has estab- require more power. To obtain the best results, most speaker ® lished the CEA color-coding standard. See Table 1. manufacturers offer powered subwoofers that contain their ow
Summary of the content on the page No. 19
AVR 7550HD OM.qxd 2/25/09 11:52 AM Page 19 CONNECTIONS of the HDMI data, minimizing the number of cable connections You may only record materials from DVDs or other copy-protected in your system. The AVR 7550HD implements Deep Color, which sources using analog connections. Remember to comply with all copy- increases by an order of magnitude the shades of color that can right laws, if you choose to make a copy for your own personal use. be displayed, and the latest lossless multichannel audio
Summary of the content on the page No. 20
AVR 7550HD OM.qxd 2/25/09 11:52 AM Page 20 CONNECTIONS Composite video is the basic connection most commonly available. The AM loop antenna needs to be assembled. Connect the two leads The jack is usually color-coded yellow, and looks like an analog to the spring terminals on the receiver. The AM antenna leads have audio jack. Do not plug a composite video cable into an analog or no polarity, and you may connect them to either terminal. See coaxial digital audio jack, or vice versa. Both the
