Summary of the content on the page No. 1
RICOH LENS
S10 24-72mm F2.5-4.4 VC
Instruction Manual
The serial number may be found on the bottom of the lens.
Summary of the content on the page No. 2
Package Contents Before using your Ricoh lens, confirm that the package contains the items listed below. Camera unit Lens cap The serial number may be found on the bottom. Comes attached to the camera unit. I nstruction manual (this manual) W arranty Connector cap Soft case Comes attached to the camera unit.
Summary of the content on the page No. 3
Introduction To use this lens, you need to attach it to a compatible camera body. Refer to the Camera Body User Guide for details about how to operate shooting and playback functions and change settings and to read important precautions for use. This instruction manual will refer to this lens as the “camera unit” and will explain functions and operating procedures that are available only when this camera unit is used with a compatible camera body. See also the GXR Camera Body User Guide. To
Summary of the content on the page No. 4
Safety precautions Read all safety precautions thoroughly to ensure safe use. Test shots Take test shots to ensure that the camera is working properly before taking photos on important occasions. Copyright Reproduction or alteration of copyrighted documents, magazines, and other materials, other than for personal, home, or other similarly limited purposes, without the consent of the copyright holder, is prohibited. Exemption from liability Ricoh Co., Ltd. assumes no liability for failure to
Summary of the content on the page No. 5
© 2009 RICOH CO., LTD. All rights reserved. This publication may not be reproduced in whole or in part without Ricoh’s express written permission. Ricoh reserves the right to change the contents of this document at any time without prior notice. Every effort has been made to ensure the accuracy of the information in this document. Should you nevertheless notice any errors or omissions, we would be grateful if you would notify us at the address listed on the back cover of this booklet.
Summary of the content on the page No. 6
Safety Precautions Warning Symbols Various symbols are used throughout this instruction manual and on the product to prevent physical harm to you or other people and damage to property. The symbols and their meanings are explained below. This symbol indicates matters that may lead to imminent risk of Danger death or serious injury if ignored or incorrectly handled. This symbol indicates matters that may lead to death or serious Warning injury if ignored or incorrectly handled. This symbol
Summary of the content on the page No. 7
Sample Warnings The symbol alerts you to actions that must be performed. The symbol alerts you to prohibited actions. The symbol may be combined with other symbols to indicate that a specific action is prohibited. Examples = Do not touch = Do not disassemble Observe the following precautions to ensure safe use of this unit. Danger Do not attempt to disassemble, repair or alter the equipment yourself. The high- voltage circuitry in the equipment poses significant electrical hazard.
Summary of the content on the page No. 8
Warning Keep the equipment out of the reach of children. Do not touch the internal components of the equipment if they become exposed as a result of being dropped or damaged. The high-voltage circuitry in the equipment could lead to an electric shock. Remove the battery as soon as possible, being careful to avoid electric shocks or burns. Take the equipment to your nearest dealer or service center if it is damaged. Do not use the equipment in wet areas as this could result in fire or electr
Summary of the content on the page No. 9
Caution Do not allow the equipment to get wet. In addition, do not operate it with wet hands. Both pose the risk of electric shock. Safety Precautions When using optional products, carefully read the instructions for Accessories provided with the product before using that product.
Summary of the content on the page No. 10
Table of Contents Package Contents ................................................................................................................. 2 Introduction ............................................................................................................................ 3 Safety Precautions ................................................................................................................ 6 Parts of theL ens .....................................................
Summary of the content on the page No. 11
[ISO Setting] Setting (Shooting Menu) .......................................................................22 [Camera Shake Correction] Setting (Shooting Menu) ...........................................23 [Reg. My Settings] (Key Custom Options) ..................................................................23 [Set Fn1 Button]/[Set Fn2 Button] (Key Custom Options) ....................................24 [Digital Zoom Image] Setting (Setup) ....................................................
Summary of the content on the page No. 12
Parts of the Lens 2 1 4 3 1 Connector 2 Ring cap 3 Lens 4 Ring cap removal button 1
Summary of the content on the page No. 13
Shooting Mode P: Program Shift The following shows the approximate ranges available for shutter speed and aperture combinations. The actual values may vary depending on EV (exposure value). In these examples, the flash mode is set to [Flash Off], and the ISO setting is set to [ISO100]. 1
Summary of the content on the page No. 14
: Wide : Tele Ev6 Ev7 Ev8 Ev9 Ev10 Ev11 Ev12 Ev13 Ev14 Ev15 Ev16 Ev17 Ev18 Ev19 Ev20 Ev5 F16 F15.8 Ev4 F11 Ev3 F9.1 F8.0 Ev2 F5.6 Ev1 F4.0 Ev0 F2.8 F2.5 Ev-1 F2.0 Ev-2 F1.4 F1.0 8 4 2 1 1/2 1/4 1/8 1/15 1/30 1/60 1/125 1/250 1/500 1/1000 1/2000 1/4000 1
Summary of the content on the page No. 15
Mode M: Manual Exposure If [Auto] or [Auto-Hi] is selected for ISO Setting, ISO will be fixed at 100 while the camera is in manual exposure mode. The Zoom Macro Scene Mode When the mode dial is set to SCENE, selecting the [Zoom Macro] mode will automatically optimize the zoom position, allowing you to shoot the subject at a larger size than with normal macro shooting. In zoom macro mode, the optical zoom cannot be used. For zoom shooting methods, refer to the “Camera Body User Guide”. 1
Summary of the content on the page No. 16
Caution ---------------------------------------------------------------------------------- • You can shoot close-ups using the zoom macro within the following distances. Shooting range: Approx. 17 × 13 mm (when digital zoom is not used) Approx. 1 cm (from the front of the lens) Shooting range: Approx. 4.4 × 3.3 mm (when 4.0× digital zoom is used) • When [Picture Quality/Size] is set to 4:3 for [L], you can also set [Digital Zoom Image] to [Auto Resize], and auto resize zoom will be activa
Summary of the content on the page No. 17
Settings Shooting Menu Settings in [Zoom Macro] Mode When [Zoom Macro] is selected, items from the shooting menu that can be set and default values are as follows. Item Default setting Picture Quality/Size L 4:3 NORMAL Focus AF Pre-AF Off Exposure Metering Multi Image Settings Standard Continuous Mode Off Auto Bracket Off Flash Exposure Compensation 0.0 1
Summary of the content on the page No. 18
Item Default setting Manual Flash Amount 1/2 Flash Synchro Settings 1st Curtain Noise Reduction Off Noise Reduction ISO Over ISO 401 Distortion Correction Off Custom Self-Timer 2 Pics, 5 seconds Date Imprint Off Exposure Compensation 0.0 White Balance Multi-P AUTO ISO Setting Auto Camera Shake Correction On 1
Summary of the content on the page No. 19
[Picture Quality/Size] Setting (Shooting Menu) The following picture quality, image size and aspect ratio options are available for the [Picture Quality/Size] setting in the shooting menu. A photograph‘s file size will depend on the combination of picture quality and image size used. When recording movies, you can select the movie size. 1
Summary of the content on the page No. 20
Photographs Item Aspect ratio Compression Image size (pixels) 2 1 RAW 16:9 * FINE/NORMAL/VGA * 3648 × 2048 1 4:3 FINE/NORMAL/VGA * 3648 × 2736 2 1 3:2 * FINE/NORMAL/VGA * 3648 × 2432 3 1 1:1 * FINE/NORMAL/VGA * 2736 × 2736 2 L (Large) 16:9 * FINE/NORMAL 3648 × 2048 4:3 FINE/NORMAL 3648 × 2736 2 3:2 * FINE/NORMAL 3648 × 2432 3 1:1 * FINE/NORMAL 2736 × 2736 2 M (Middle) 16:9 * FINE/NORMAL 3264 × 1840 4:3 FINE/NORMAL 3264 × 2448 2 3:2 * FINE/NORMAL 3264 × 2176 3 1:1 * FINE/NORMAL 2448 × 2448 0
