Summary of the content on the page No. 1
BASS PROCESSOR SONIC EXCITER BASS PROCESSOR SONIC EXCITER
SONIC
EXCITER
1 2
SX3040
MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX
DRIVE TUNE MIX TUNE HARMONICS MIX IN/OUT IN/OUT DRIVE TUNE MIX TUNE HARMONICS MIX POWER
User Manual
SONIC EXCITER SX3040
Ultimate Stereo Sound Enhancement Processor
Summary of the content on the page No. 2
2 SONIC EXCITER SX3040 User Manual Table of Contents Thank you ....................................................................... 2 Important Safety Instructions ...................................... 3 Legal Disclaimer ............................................................. 3 Limited Warranty ........................................................... 3 1. Introduction ............................................................... 5 1.1 Before you get started .....................
Summary of the content on the page No. 3
3 SONIC EXCITER SX3040 User Manual 9. Do not defeat the safety purpose of the polarized UNDERTAKING OR REPRESENTATION. THIS MANUAL Important Safety or grounding-type plug. A polarized plug has two blades IS COPYRIGHTED. NO PART OF THIS MANUAL MAY Instructions with one wider than the other. A grounding-type plug BE REPRODUCED OR TRANSMITTED IN ANY FORM has two blades and a third grounding prong. The wide OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, blade or the third prong are provided for you
Summary of the content on the page No. 4
4 SONIC EXCITER SX3040 User Manual “Support” at behringer. com. If your country is not • connection or operation of the unit in any way (3) This warranty does not detract from the seller’s listed, please check if your problem can be dealt with that does not comply with the technical or safety obligations in regard to any lack of conformity of the by our “Online Support” which may also be found under regulations applicable in the country where the product and any hidden defect. “Support” at be
Summary of the content on the page No. 5
5 SONIC EXCITER SX3040 User Manual 1. Introduction 1.1.2 Initial operation Often used in the past to compensate for the inadequacies of analogue Ensure adequate air supply and to avoid overheating do not place the unit near technology, the exciter in today’s Digital Age is a secret weapon of sound radiators etc. engineers for generating contemporary productions that truly stand out. You can ◊ Blown fuses must be replaced by fuses of the correct rating! now experience this exciting circuit w
Summary of the content on the page No. 6
6 SONIC EXCITER SX3040 User Manual SONIC EXCITER (8) POWER: Use the POWER switch to put the unit into operation. The POWER switch should be in the “Off” position when you connect the unit to the (4) TUNE: Sets the cut-off frequency at which the harmonic exciter starts power feed (mains). working. The control range is from 1.3 kHz (MIN) to 10 kHz (MAX). To disconnect the unit from the mains, pull out the power plug. (5) HARMONICS: This control is used to set the number of harmonics that When
Summary of the content on the page No. 7
7 SONIC EXCITER SX3040 User Manual 3.2.1 Series cable connection (Insert mode) B1220 PRO B1220 PRO The simplest form of series connection consists of a signal chain in which several devices are connected in a row, e.g. keyboard effects unit (SX3040) amplifier. An input signal is fed into the effects unit (SX3040) and a mixed signal consisting of an input signal and a processed effect signal is sent to an amplifier or a recording device (MD recorder, computer etc.) for reproduction. Anot
Summary of the content on the page No. 8
8 SONIC EXCITER SX3040 User Manual 3.2.4 Studio application 3.2.5 Stage operation with instrument amplifiers In a studio environment the SONIC EXCITER is ideal for mastering to enhance the Besides being ideal for use with stereo signals, the SONIC EXCITER is also suitable sound of recordings. The SX3040 can lend your music the professional polish of for use with one or two individual signals, e. g. guitars. With electric guitars it can high-quality productions in just a few steps. Even if yo
Summary of the content on the page No. 9
9 SONIC EXCITER SX3040 User Manual 3.3 Basic operation Unbalanced ¼" TS connector Due to the small number of SX3040 controls, this is an easy processor to operate. strain relief clamp Perform the following steps: sleeve 1) Connect the unit according to the application as described in section 3.2. tip ◊ First make the following settings for one channel (channel 1 or 2 depending on input assignment). For stereo applications choose the same settings for the second channel. sleeve (ground/shield)
Summary of the content on the page No. 10
10 SONIC EXCITER SX3040 User Manual 4.2.2 Connection with insert cables 5. Specifications Use standard ¼" insert cables to connect the SONIC EXCITER to the insert path of Inputs a mixing console. These Y cables have two ¼" TS connectors at one end, and one ¼" TRS connector at the other. Connect the plug marked “Send” to the INPUT Connections XLR sockets and ¼" stereo jacks L jack on the effects unit. Connect the “Return” plug to the OUTPUT L jack on the device. Connect the TRS connector to
Summary of the content on the page No. 11
11 SONIC EXCITER SX3040 User Manual Dimensions/Weight Dimensions (H x W x D) approx. 8.54 x 1.8 x 19" approx. 217 x 44.5 x 483 mm Weight approx. 5.1 lbs / 2.30 kg BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
Summary of the content on the page No. 12
We Hear You
