Coustic 401SE user manual

User manual for the device Coustic 401SE

Device: Coustic 401SE
Category: Car Amplifier
Manufacturer: Coustic
Size: 0.93 MB
Added : 12/14/2013
Number of pages: 19
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Coustic 401SE. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Coustic 401SE.

For your convenience

If looking through the Coustic 401SE user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Coustic 401SE on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Coustic 401SE to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Coustic 401SE User manual - Online PDF
Advertisement
« Page 1 of 19 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Coustic 401SE but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Coustic 401SE. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

241SE/401SE/601SE AMPLIFIER OWNER’S MANUAL
(MODE D’EMPLOI)
877 COUSTIC COUSTIC.COM

Summary of the content on the page No. 2

COUSTIC.COM WELCOME FEATURES BUILT-IN ELECTRONIC CROSSOVER WITH CONTINUOUSLY ADJUSTABLE . . . to the Coustic world of power and clarity. The new 241/401/601SE amplifiers deliver the cleanest music you’ve ever heard at any power level in the 12-volt environment. Besides the sleek CROSSOVER FREQUENCIES contoured design, the 241/401/601SE amplifier has all the latest and most sophisticated audio An electronic crossover has many advantages over passive crossovers - lower cost, simplified yet feature

Summary of the content on the page No. 3

COUSTIC.COM CONTROLS, INDICATORS, AND TERMINALS INPUT PANEL OUTPUT PANEL Figure 2: Output Panel Terminals and Indicators Figure 1: Input Panel Terminals and Controls 9. POWER AND PROTECT INDICATOR (PWR/PRT) 1. FILTER MODE SELECT SWITCH (MODE) Green light indicates that the amplifier is "ON". "HPF": Slide switch to this position if the amplifier is used as a mid/tweeter amplifier. Red light indicates either a high current, short circuit or DC offset is detected at the speaker "OFF": Slide switch

Summary of the content on the page No. 4

COUSTIC.COM INSTALLATION Vibration: Constant vibration could eventually cause the amplifier to come off its mount, resulting By purchasing the 241/401/601SE power amplifiers, you are already one step closer to experi- in stress on wire connections, which, in turn, results in "open" or "short" circuit. For this reason, a encing the purest and most natural sound quality in the automobile environment. To take full advan- location with minimum vibration and a flat surface for secure and firm mountin

Summary of the content on the page No. 5

COUSTIC.COM Figure 7. Typical Multi-amplifier system Figure 6. Typical System connection BI-AMPLIFICATION A bi-amplified system normally consists of an active crossover and two amplifiers. The active crossover divides the audio frequency spectrum into two ranges: frequencies below the crossover point are directed to the amplifier driving the subwoofer(s), while all frequencies above the crossover point are directed to the amplifier driving the mid-range/tweeters. 9

Summary of the content on the page No. 6

COUSTIC.COM FOR BRIDGED (MONO) MODE INSTALLATION continued Note: For bridged mono mode, we recommend a total load of 4 or 8 ohms. 1. Connect the left positive ("+") speaker output of the amplifier to the positive input terminal of INPUT CONNECTIONS the speaker. Connect the RCA input jacks of the Amplifier to the output of the Source Unit (i.e., radio, cassette 2. Connect the right negative ("–") speaker output of the amplifier to the negative input terminal player or CD player). If line level ou

Summary of the content on the page No. 7

COUSTIC.COM CONNECTING AMPLIFIER POWER WIRE TO THE BATTERY ADJUSTMENTS Note: Power cables are as important as battery capacity. Use only high quality power cables of gauge size AWG 8 (AWG 4 for the 401/601SE) or larger for installation. YOU CAN NEVER HAVE TOO BIG OF A POWER/GROUND WIRE! CROSSOVER SELECTION The amplifier has built-in high-pass/low-pass filters that can be defeated by sliding the switch to Run the power cable through the interior of the vehicle connecting one end to the amplifiers

Summary of the content on the page No. 8

COUSTIC.COM TROUBLE-SHOOTING SECTION SYMPTOM PROBABLE CAUSE 1. No power Check connections to the amplifier's Ground, B+ & Remote terminals. Check connection at "+" terminal of the battery. Check the remote turn-on terminal. Ensure it receives power when the source is turned on (or when the switch is turned on). Refer to the Installation Section. Check the power line fuse: if fuse is blown, replace it; if fuse continues to blow, check the power wire and also the amplifier for a short. If the shor

Summary of the content on the page No. 9

COUSTIC.COM SPECIFICATIONS: SYMPTOM PROBABLE CAUSE 9. Constant level whining Check for a ground loop in the system. Turn the system off 241SE 401SE 601SE noise (most noise with and one by one change the ground connections (by Rated Power @ 14.4 V (0.1 % THD): 2 x 60 Watts 2 x 100 Watts 2 x 150 Watts source unit volume at changing to a different contact point,scraping the level 4 Ohm Stereo minimum) constant irrespective of metal clean of any paint, rust or grease). Turn the system on and chec

Summary of the content on the page No. 10

COUSTIC.COM CARACTÉRISTIQUES BIENVENU FILTRE ACTIF INCORPORÉ RÉGLABLE EN CONTINU ...Chez COUSTIC, un univers de puissance et de clarté. Les nouveaux amplis 241/401/601 Un filtre actif intègre beaucoup d’avantages comparé à un filtre passif : coût réduit, plus simple, plus délivrent la puissance la plus parfaite de toute l’industrie du ”12 volts”. En plus d’un fantastique souple, générant moins de distorsion et procurant plus de gain. design, les 241/401/601SE sont construits avec les technologi

Summary of the content on the page No. 11

COUSTIC.COM CONTRÕLES, INDICATEURS ET CONNECTEURS PANNEAU DES ENTRÉES ET DES CONFIGURATIONS PANNEAU DES SORTIES Figure 2: Panneau des sorties et des indicateurs Figure 1: Panneau des entrées et des réglages 9. Indicateur de mise en tension et de protection 1. Sélecteur du filtre actif Led verte : l’amplificateur est allumé Position ”HPF” : Filtre passe haut pour des haut-parleurs avant ou arrière Led rouge : L’amplificateur est en protection. L’ampli repasse automatiquement Position ”OFF” : F

Summary of the content on the page No. 12

COUSTIC.COM INSTALLATION Vibrations : Des vibrations trop importantes peuvent détacher l‘ampli qui ne serait plus retenus que En achetant le 241/401/601SE, vous avez déjà fait un grand pas vers un son pur et naturel. par les fils, ce qui est dangereux. C’est pour cela qu’un montage sur une surface plane, permet- Avant de passer à l’installation et pour bénéficier de tout le potentiel de votre ampli, nous vous tant de solides fixations, est recommandé. recommandons de lire attentivement ce manuel

Summary of the content on the page No. 13

COUSTIC.COM Figure 7 : Système multi amplifié Figure 6 : Installation traditionnelle BI-AMPLIFICATION Un système bi-amplifié est généralement constitué de deux amplis et d’un filtre actifs. Les basses fréquences sont orientées vers l’ampli du subwoofer pendant que le reste du spectre va vers l’ampli des médiums et des tweeters. 25

Summary of the content on the page No. 14

COUSTIC.COM MONTAGE PONTÉ (minimum 4 ) INSTALLATION Nous recommandons une impédance de 4 ou 8 1. Brancher le connecteur ”+” du subwoofer à la borne ”L +” CONNEXION DU SIGNAL 2. Brancher le connecteur ”-” du subwoofer à la borne ”R -” Connectez l’entrée RCA (input) de l’ampli à la sortie RCA de votre source. Un câble vendu séparément est nécessaire. Si votre source ne dispose pas de sortie RCA, utilisez les sorties haut- parleurs pour alimenter l’amplificateur pas les entrées haut niveau.

Summary of the content on the page No. 15

COUSTIC.COM CÂBLAGE DE L’ALIMENTATION AMPLI/BATTERIE RÉGLAGES Les câbles d’alimentation sont aussi importants que la capacité de la batterie elle-même. N’utilisez que des câbles de bonne qualité d’une section minimum de 10 mm2 pour le 241SE, 20mm2 SÉLECTION DU TYPE DE FILTRAGE pour le 401SE et 35mm2 pour le 601SE. Il est impossible d’avoir un câble d’alimentation et de Les amplis sont équipés d’un filtre actif passe haut ou passe bas réglable masse trop gros. 1. En position ”High Pass” (passe ha

Summary of the content on the page No. 16

COUSTIC.COM EN CAS DE DIFFICULTÉ Symptôme Cause probable 1. Ne s’allume pas Vérifier les connexions à l’ampli alimentation masse et remote. Vérifier la connexion à la borne + de la batterie. Vérifier que le remote délivre bien du 12 volts lorsque la source est allumée. . Vérifier le fusible. S’il est cassé, remplacez le. S’il saute encore, vérifier le câble sur toute sa longueur et l’ampli contre les court-circuits. Si le court-circuit est sur l’alimentation, réparer la. S’il est dans l’ampli,

Summary of the content on the page No. 17

COUSTIC.COM Symptôme Cause probable CARACTÉRISTIQUES TECHNIQUES 9. Bruit de fonctionnement à Il faut chercher les boucles de masses en changement chaque point bas niveau de masse l’un après l’autre. ATTETION : il ne faut pas débrancher la masse lorsque l’ampli est en fonction 241SE 401SE 601SE nement. Cela pourrait l’endommager. Vérifier les câbles RCA qui pourraient être endommagés ou coincés sous une vis ou un siège. Pour s’en assurer, il suffit d’utiliser un câble Puissance sous 14,4volts 2

Summary of the content on the page No. 18

COUSTIC.COM NOTES: COUSTIC LIMITED WARRANTY IMPORTANT NOTICE TO CONSUMER: Coustic offers the following warranty to the ORIGINAL PURCHASER of COUSTIC products, pur- chased from an authorized Coustic dealer, within the period stated herein: Coustic warrants the 161SE, 241SE, 401SE, 601SE, 481QE, 321QE amplifiers against defects in material and workmanship for a period of ONE (1) YEAR from date of original purchase. The limited warranty is offered as an Over The Counter (OTC) exchange providing tha

Summary of the content on the page No. 19

7676 SOUTH 46 STREET, SUITE 2020, PHOENIX, AZ 85042 TOLL FREE 877 COUSTIC TELEPHONE 602 438 2020 FACSIMILE 602 438 7313 coustic.com ©2002. COUSTIC IS A REGISTERED TRADEMARK OF MITEK CORPORATION. ALL RIGHTS RESERVED. COU000768 RevB 1/02 NDM194


Alternative user manuals
# User manual Category Download
1 Coustic 241SE User manual Car Amplifier 34
2 Coustic AMP-401DB User manual Car Amplifier 23
3 Coustic D-block User manual Car Amplifier 5
4 Coustic 601SE User manual Car Amplifier 49
5 Coustic 481QE User manual Car Amplifier 65
6 Coustic 321QE User manual Car Amplifier 59
7 Coustic AMP-801DB User manual Car Amplifier 20
8 Sony XM-1600GSD User manual Car Amplifier 34
9 Adcom GFA-4304 User manual Car Amplifier 3
10 Sony XM-2000R User manual Car Amplifier 21
11 Sony XDP-210EQ User manual Car Amplifier 38
12 Samsung T500-1BD User manual Car Amplifier 0
13 Philips TDA1519 User manual Car Amplifier 12
14 Philips CMQ205 User manual Car Amplifier 1
15 Sony RS-232C User manual Car Amplifier 4