ATEN Technology CS-1008 user manual

User manual for the device ATEN Technology CS-1008

Device: ATEN Technology CS-1008
Category: Switch
Manufacturer: ATEN Technology
Size: 0.52 MB
Added : 7/7/2013
Number of pages: 30
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for ATEN Technology CS-1008. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with ATEN Technology CS-1008.

For your convenience

If looking through the ATEN Technology CS-1008 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual ATEN Technology CS-1008 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual ATEN Technology CS-1008 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
ATEN Technology CS-1008 User manual - Online PDF
Advertisement
« Page 1 of 30 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual ATEN Technology CS-1008 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to ATEN Technology CS-1008. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

 

   
2001-01-13

Summary of the content on the page No. 2

2001-01-13

Summary of the content on the page No. 3

 The complete Master View package consists of: One Master View Pro KVM Switch (CS-1004, CS-1008, or CS-1016)   One Power Adapter  One User Manual Check to make sure that the unit was not damaged in shipping. If you encounter a problem, contact your dealer. Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any damage to the unit, and/or any of the devices connected to it. ©Copyright 2000 ATEN International Co., Ltd. Manual Part N

Summary of the content on the page No. 4

 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Hardware Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 PC . . . . . . . . . . . . . .

Summary of the content on the page No. 5

 The Master View Pro KVM Switch is a control unit that allows access to multiple computers from a single console (keyboard, monitor, and mouse). Before the development of the Master View, the only way to control multiple computer configurations from a single console was through a complex and costly network system. Now, with the Master View Pro, you can easily access multiple computers in a cost effective manner. Depending on the model, a Master View Pro can control up to 4, 8, or 16 PCs.

Summary of the content on the page No. 6

   Daisy Chain Up To 31 Additional Units - Control Up to 512 PCs From a Single Console  No Software Required - Computer Selection via Front Panel Switches, Hotkeys or OSD (On Screen Display)  Quick View Scan Mode for Monitoring Selected PCs  PS/2 and Serial Mouse Emulation Provided For System Bootup  Console’s PS/2 Mouse Controls All Connected PCs - Even Those With Serial Mice  Support Microsoft Intellimouse Pro, Logitech FirstMouse, MouseMan. SVGA, VGA and Multisync Monitor Support

Summary of the content on the page No. 7

   Console  A VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be using on any computer in the installation. A PS/2 style mouse   A PS/2 style keyboard PC The following equipment must be installed on each computer: A VGA, SVGA or Multisync card.  Either a 6-pin mini-DIN (PS/2 style), or DB-9 (standard serial), mouse port.   Either a 6-pin mini-DIN (PS/2 style) keyboard port with +5V DC on pin 4 and Ground on pin 3, or a 5-pin DIN (AT style

Summary of the content on the page No. 8

 CS-1016 Front View: * 12 4 3 T The figure shows a CS-1016 model. The only difference between it and the other models is in the number of Port Selection Switches. 1. Status LEDs OnLine: Lights ORANGE to indicate that the PC attached to the corresponding port is up and running Selected: Lights GREEN to indicate the currently selected port. 2. Power SwitchK/M Reset 3. Port Selection Switches  Press a switch to access the computer attached to the corresponding port.  If the keyboard and

Summary of the content on the page No. 9

CS-1016 Rear View: * 1 2 3 45 6 7 T The figure shows a CS-1016 model. The only difference between it and the other models is in the number of Port Selection Switches. 1. Daisy Chain Section If you daisy chain units, the cables plug in here. 2. CPU Port Section The cables that link to the computers plug in here. 3. Power Jack The power adapter plugs in here. 4. DIP Switch SW 1 - 5: Sets the Station No. (see the table on page 23 for details) SW 6: Enables/Disables OSD Hot Key switching (On=Enabled

Summary of the content on the page No. 10

   Before you begin, make sure that power to all the devices (Master View Pro and PCs) you will be connecting up have been turned off. First Stage Installation In a Single Stage installation, there are no additional Master View’s daisy chained down from the first unit. To set up a single stage installation do the following: 1. Set Switches 1 - 5 of the Master View Pro’s DIP Switch to the ON position to set this unit up as the First Station (see the table on page 26 for Dip Switch Stati

Summary of the content on the page No. 11

6. Turn on the power to the Master View. Note: When you turn the unit On, it undergoes a Power On Self Test. If there is a problem, Port LEDs 1 - 4 flash repeatedly according to a pattern that indicates what the problem is: Pattern Indication LEDs 1 - 4 Flash Simultaneously Internal RAM Memory Error LEDs 1 - 4 Flash One After the Other External RAM Memory Error LEDs 1 + 2, and LEDs 3 + 4 Alternately Light and Go Off ROM Test Error If any of these problems occur, turn the Switch Off, then turn it

Summary of the content on the page No. 12

4. Use Daisy chain cable set 2L-1700 (as described in the Hardware Requirements section), to connect from the Chain Out Port of the parent Master View unit to the Chain In Port of the child Master View unit (First Station Out to Second Station In, Second Station Out to Third Station In, etc.). Note: You cannot use the Chain In Port of the First Station Master View, since it is the highest level parent. 5. Plug the power adapter into an AC source; plug the power adapter cable into the Master View

Summary of the content on the page No. 13

  Hot Plugging The Master View Pro supports hot plugging - components can be removed and added back into the installation by unplugging their cables from the CPU ports without the need to shut the unit down. In order for hot plugging to work properly, however, these procedures must be followed: Hot Plugging CPU Ports:  When hot plugging cables from the CPU ports: 1. The cable must be plugged back into the same port it was removed from. 2. After plugging the cable back in, you must perfo

Summary of the content on the page No. 14

Port Selection Controlling all the PCs connected up in your Master View installation from a single console could not be easier. Three methods are available that provide instant access to any PC on the chain: Manual; Hot Key; and OSD.  Manual Simply press the appropriate Port Selection Switch on the Master View’s front panel. After you press the switch, the Selected LED lights to indicate that the port is currently selected. The OSD (see p.18) automatically switches to highlight the computer tha

Summary of the content on the page No. 15

   Since each CPU Port on a Master View installation is assigned a unique Port ID, you can directly access any computer on any level of the installation using the Hot Key port selection method or from the OSD Main Menu by specifying the Port ID that the computer is connected to. The Port ID is made up of two parts: 1. The Station Number - a two digit number which reflects the Master View’s position in the daisy chain sequence, and 2. The Port Number - a one or two digit number whi

Summary of the content on the page No. 16

Port Numbering Table Port Numbering is summarized in the following table: Number of Digits Meaning 4 First two for Station Number; second two for Port Number 3 First two for Station Number; third for Port Number 2 Port Number on the Currently Active Station 1 Port Number on the Currently Active Station 12 CS-1004 / CS-1008 / CS-1016 User Manual 2001-01-13

Summary of the content on the page No. 17

    Hotkey Port Selection Hot key port selection allows you to conveniently access any computer directly form the keyboard, in stead of having to manually select it with a Port Selection switch. Note: Make sure that DIP Switch 6 (located on the Master View’s rear panel), is set to ON to enable the Hot Key feature under OSD. To select a port with the Hotkey method, do the following: 1. Press the left and right Ctrl Keys [Ctrl+Ctrl] and release both of them at the same time. Note: In

Summary of the content on the page No. 18

Hot Key Broadcasting Commands to all attached PCs (to install software or shut down all the PCs, e.g.), can be broadcast from the console’s keyboard with the following Hot Key combinations: [Ctrl] + [Alt] + [1] + [Enter] (to initiate the keyboard broadcast)  A Broadcast symbol appears in front of the Station ID (if the Port ID is currently displayed on the screen), to indicate that Broadcasting is in effect. [Ctrl] + [Alt] + [2] + [Enter] (to end the keyboard broadcast)  When keying in the com

Summary of the content on the page No. 19

!  On Screen Display (OSD), provides a menu driven interface to handle the computer switching procedure. Using OSD is a great deal more convenient - especially in large, daisy chained installations where it is difficult to keep track of which port a particular computer is attached to. All operations start from the OSD Main Menu. To pop up the Main Menu, tap either Ctrl key twice. When you invoke the OSD, a screen similar to the one below appears: OSD always starts in List view, with t

Summary of the content on the page No. 20

OSD Main Menu Headings Heading Explanation This column lists the Port ID numbers (Station Number - Port Number) for SN-PN all the CPU ports on the installation. The simplest method to access a particular computer is move the Highlight Bar to it, then press [Enter]. If a port has been selected for Quick View scanning (see F2 and F4, QV below), an arrowhead displays in this column to indicate so. PC Lists all the computers that are Powered On and are On Line. If a port has been given a name (see F


Alternative user manuals
# User manual Category Download
1 ATEN Technology ACS1208 User manual Switch 13
2 ATEN Technology ACS-1602 User manual Switch 1
3 ATEN Technology AF-241 User manual Switch 7
4 ATEN Technology ALTUSEN Hideaway KL9116 User manual Switch 27
5 ATEN Technology ACS1216A User manual Switch 12
6 ATEN Technology ACS-1208L User manual Switch 2
7 ATEN Technology ACS-1714 User manual Switch 11
8 ATEN Technology ALTUSCN KH1516I User manual Switch 28
9 ATEN Technology ALTUSEN KH1508 User manual Switch 10
10 ATEN Technology AS-811P User manual Switch 1
11 ATEN Technology ALTUSEN KH2516 User manual Switch 2
12 ATEN Technology AS-402PII User manual Switch 0
13 ATEN Technology ALTUSEN KM0832 User manual Switch 0
14 ATEN Technology AS-8144B User manual Switch 1
15 ATEN Technology AS-411S User manual Switch 6
16 Sony 4-296-436-11 (2) User manual Switch 0
17 3Com 10/100BASE-TX User manual Switch 61
18 3Com 2226-SFP User manual Switch 688
19 3Com 16985ua.bk User manual Switch 10
20 3Com 10BASE-T User manual Switch 4