Summary of the content on the page No. 1
VC-810S
VC-810S48
8-Port VDSL2 + 1-Port Gigabit TP/SFP Combo Web
Smart Switch
Traffic Flow QoS for application services ensured
The Switch contains robust QoS features such as Port-Based, 802.1p
priority and / IP TOS/DSCP. It guarantees the best performance at VoIP
and Video stream transmission and empowers / enterprises to take full
advantages of the limited network resources.
Selectable VDSL2 data rate for Service Differentiation
High Performance of VDSL2 Data Rate over Existing Phone Line
Summary of the content on the page No. 2
VC-810S VC-810S48 Applications Last Mile of FTTx deployment Up to 100/55 Mbps asymmetric data rate within 300m and long range of connections provide ultra-high performance to the pervasive telephone line networks. With one build-in mini-GBIC 1000Base-SX/LX SFP (Small Factor Pluggable) interface, the deployed distance of VC-810S can be extended from 550 meters (Multi-mode fiber) up to above 10/50/70/120 kilometers (Single-mode fiber). The various distances of SFP (Small Factor Pluggable) and
Summary of the content on the page No. 3
VC-810S VC-810S48 MTU/MDU/Hospitality Solution IPTV, VOD and digital message broadcasting services are the worldwide hot trends, and more and more service providers have upgraded the devices of client side from analog system to digital system gradually. The VC-810S, VDSL2 CO Switch, and VC-201, VDSL2 CPE converter, are the best solution to quickly provide cost-effective and high speed network services by utilizing the existing telephone wire infrastructure. IP network installation is straigh
Summary of the content on the page No. 4
VC-810S VC-810S48 Key Features VDSL InTERFaCE QUaLITy oF SERVICE • 8 x Spring terminal block connectors for VDSL connection • 2 priority queues on all switch ports • 8 x Spring terminal block connectors for telephone/POTS • Supports QoS and bandwidth control (Rate Limit) on each VDSL connection and GbE port • Built-in POTS splitter for each VDSL port • Traffic class assignment based on IP TOS/DSCP mode, 802.1p priority tag mode and Port-Based mode • Link to VC-201 CPE Bridge • Support for str
Summary of the content on the page No. 5
VC-810S VC-810S48 Specification Product 8-Port VDSL2 + 1-Port Gigabit TP/SFP Web Smart CO Switch Model VC-810S / VC-810S48 Hardware Specification 8-Port VDSL2, 2-Pin screwless spring terminal block connectors VDSL Interface 8-Port POTS/Telephone, 2-Pin screwless spring terminal block connectors Ethernet 1-Port Gigabit TP/SFP Combo interface, Auto-negotiation, Auto MDI/MDI-X Selectable Fast and Interleaved mode Selectable target data rate VDSL2 Features Selectable target SNR (signal to Noise R
Summary of the content on the page No. 6
VC-810S VC-810S48 Security Port Security (Disable Per Port of MAC Address Learning) RFC-1213 MIB-II SNMP MIBs RFC-2863 Interface MIB Other SNTP Client MAC Address Table Aging time: selectable Default Mode (300 Sec.) and Fast Mode (30 Sec.) Standards Conformance Regulation Compliance FCC Part 15 Class A, CE IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x Flow Control IEEE 802.1p Class of service IEEE 802.1Q VLAN Tagging ITU-T G.993.1 (
