Summary of the content on the page No. 1
®
OmniView Secure DVI
Dual-Link KVM Switch
User Manual
F1DN102Dea
F1DN104Dea
Summary of the content on the page No. 2
Table of Contents 1. Introduction .............................................................................................1 Package Contents ........................................................................... 1 2. Overview .................................................................................................2 Security Features ............................................................................ 2 Other Features ..................................................
Summary of the content on the page No. 3
section Introduction Congratulations and thank you for purchasing this Belkin OmniView Secure DVI Dual-Link KVM Switch (the Switch). Designed especially for secure military 1 and government installations, the Switch provides the centralized control required by today’s IA (Information Assurance) computer environments. It 2 allows users to manage multiple computers from a single USB console, while preventing unintended data transfer between computers running on different security levels. 3
Summary of the content on the page No. 4
Overview Security Features • Dedic at ed Pr oc es sor s Designed specifically for secure environments, the Switch features a dedicated processor per computer port. This keeps each computer running on different security levels completely separated and secure at all times, and prevents any unintended data transfer between computers. • No Memory Buff er The Switch does not have a memory buffer and does not have the ability to store data. This prevents any keystrokes or other data input
Summary of the content on the page No. 5
section Overview Other Features 1 • USB Support 2 The Switch is compatible with USB 1.1 and USB 2.0 technology and supports Plug-and-Play connectivity with USB computers, keyboards, and mice. 3 • Dual-Link D VI Support The Switch supports video resolutions of up to 2560x1600. This includes 4 support for digital displays 20 inches and larger. • Audio Swit ching 5 Allows you to share speakers and microphone between computers. 6 • Dedic at ed P ort Sel ect or s Port selectors, l
Summary of the content on the page No. 6
Overview Equipment Requirements Cables Belkin highly recommends you use Belkin DVI/USB KVM Cable Kits with Audio & Mic for your Switch to help ensure superior performance. These cables offer the highest quality possible to ensure optimal data and audio video transmission. One Cable Kit is required per connected computer. F1D9201b-XX Belkin DVI/USB KVM Cable Kits with Audio & Mic: F1D9201-06 – 6 ft. (1.8m) F1D9201-10 – 10 ft. (3m) F1D9201-15 – 15 ft. (4.6m) Note: Due to USB and DVI li
Summary of the content on the page No. 7
section Overview Syst em Requirements 1 Oper ating-Sys t em (OS) Platf orms 2 The Switch is compatible with computers running on, but not limited to, the following OS platforms: ® 3 • Windows 2000 • Windows XP (Home/Professional) 4 • Windows 2003 Server ® • Windows Vista 5 ® ® • Red Hat Linux Desktop • Red Hat Enterprise Linux WS 6 ® • Mac OS X v10.3 and higher Keyboards 7 • USB-compatible (including wireless keyboards) Mice • USB-compatible (including wireless or optical mice) Monitors
Summary of the content on the page No. 8
Overview Unit Display Diagrams Front View LED Indicators Port Selectors Back Vie w Console Audio/Mic Input Jacks Computer DVI, USB, and Console USB Audio/Mic Ports Keyboard Port Console USB DC Power Jack Mouse Port Console DVI Monitor Port Side View Tamper-Evident Seals (F1DN104Dea model shown) IMPORTANT NOTICE: There should be one tamper-evident seal on each side of the Switch enclosure (total of two seals). If both seals are visible and do not appear to be disrupted, your Sw
Summary of the content on the page No. 9
section Overview Specific ations 1 P art No.: F1DN102Dea, F1DN104Dea 2 Encl osur e: Metal enclosure with high-impact plastic faceplate P o w er Requir ements: 5V DC, 3A (minimum) power adapter with 3 4 center-pin-positive polarity A C Input: 100 to 240VAC 4 Int er changeabl e A C Plugs: 4 (U.S., U.K., Europe, Australia) No. of User s Support ed: 1 5 No. of Comput er s Support ed: 2 and 4 respectively for 2- and 4-port models Monit or s Support ed: Single-Link and Dual-Link digital
Summary of the content on the page No. 10
Installation Before you begin, please take a few minutes to register your product. This may assist Belkin in contacting you regarding important information regarding secure use of your product. You may register your product online by going to https://www.belkin.com/registration/. Pre-Configuration Wher e t o plac e the Swit ch: The enclosure of the Switch is designed for desktop or rack-mount configuration. An optional Rack-Mount Kit (Belkin part number F1D005) is available for use with the
Summary of the content on the page No. 11
section Installation St ep 1 Mounting the Swit ch (optional) 1 Br ack et Ins t allation (F1DN102Dea and F1DN104Dea) 2 The 2- and 4-Port Switches can be installed into a 19-inch rack using an optional Rack-Mount Kit, sold separately (Belkin part number F1D005). 3 1.1 Attach the Rack-Mount Bracket to the Switch using the Phillips screws provided. (Refer to diagram below.) 4 5 6 7 1.2 Mount the Switch to the rack rails. (Refer to diagram below.) Your Switch is now mounted securely
Summary of the content on the page No. 12
Installation St ep 2 Connecting the Console t o the Swit ch (required) Warning: Before attempting to connect anything to the Switch or your computers, please ensure that all computer equipment and devices are powered off. Plugging and unplugging cables while computers are powered on may cause irreversible damage to the computers and/or the Switch. Belkin International, Inc., is not responsible for damage caused by your failure to do so. Before you connect your console to the
Summary of the content on the page No. 13
section Installation St ep 3 Connecting Comput ers t o the Swit ch (required) 1 3.1 Make sure all computers and the Switch are powered off. 2 3.2 Using the Belkin DVI/USB KVM Cable Kit (F1D9201b-XX), connect the male DVI connector to the monitor port on your computer. Then connect 3 the other end of the cable into an available port on the Switch. (Refer to diagram below.) 4 3.3 Using the Cable Kit, connect the USB Type A connector to an available USB port on your computer.
Summary of the content on the page No. 14
Installation St ep 4 Po w ering Up the Syst ems (required) 4.1 Power on the attached monitor. 4.2 Attach the power adapter to the DC power jack labeled “5V, 3A” on the back of the Switch. Only use the power adapter supplied with the Switch. (Refer to diagram below.) 4.3 Power on your computers. All computers can be powered on simultaneously. Not e: Your computers should recognize the Switch and automatically install the HID USB driver if necessary. When you power on you
Summary of the content on the page No. 15
section Using your Switch Selecting a Comput er Using Port Select ors 1 Now that you have connected your console and computers to the Switch, 2 it is ready for use. You can select which computer you wish to control by pressing the corresponding port selector on the front of the Switch. The LED will illuminate to indicate which computer (or port) is currently selected. It 3 takes approximately 1–2 seconds for the video signal to refresh after switching computers. Re-synchronizatio
Summary of the content on the page No. 16
Frequently Asked Questions What does NIAP Common Crit eria v alidation t o EAL 4 mean? To learn more about NIAP Common Criteria and EAL 4, visit http://www.niap-ccevs.org/cc-scheme/consumer-guidance.cfm. What do I do if I find that the t amper-e vident seals on the Swit ch hav e been r emo v ed or disrupt ed? Please call Belkin Secure KVM Support at (800) 282-2355 immediately. The KVM Switch’s circuitry may have been compromised. Wher e c an I r egis t er my Swit ch? You can register your Swi
Summary of the content on the page No. 17
section Frequently Asked Questions Does the Swit ch support Linux? 1 Yes, the Switch works with Red Hat Linux and some Linux operating systems configured for USB support. 2 ® ® Does the Swit ch support Micr osoft IntelliMouse ? 3 ® ® The Switch supports mice from Belkin, Microsoft, Logitech , Kensington , and many other manufacturers. Please contact Belkin Technical Support at (800) 4 282-2355 for any compatibility issues you may experience. 5 General My computer does not boot when connected
Summary of the content on the page No. 18
Troubleshooting Keyboard The computer does not detect my keyboard, or my keyboard does not work when I switch computers or reboot. • C h e c k t h a t t h e k e y b o a r d y o u a r e u s i n g i s c o n n e c t e d p r o p e r l y t o the Switch. • C h e c k t h a t t h e U S B c a b l e b e t w e e n t h e S w i t c h a n d t h e c o m p u t e r i s firmly connected. • Try connecting to a different USB port on the com
Summary of the content on the page No. 19
section Troubleshooting Mouse 1 The computer does not detect my mouse, or my mouse does not work when I switch computers or reboot. 2 • C h e c k t h a t t h e m o u s e y o u a r e u s i n g i s c o n n e c t e d p r o p e r l y t o the Switch. 3 • C h e c k t h a t t h e U S B c a b l e b e t w e e n t h e S w i t c h a n d t h e c o m p u t e r i s completely connected. • Try connecting to a different USB port on the
Summary of the content on the page No. 20
Information FCC Statement D e c l a r a t i o n o f C o n f o r m i t y w i t h FC C R u l e s for Electromagnetic Compatibility We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the products: F1DN102Dea, F1DN104Dea, to which this declaration relates: Comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
