Summary of the content on the page No. 1
SHUTTLE
Vehicle Installation Guides
SIR-CK1 and SIR- CK2
128-6813
1 of 14
Summary of the content on the page No. 2
Congratulations You are one step closer to experiencing Sirius Satellite Radio. Sirius will revolutionize your in-home or vehicle entertainment with: · 100 streams of original programming, including – 60 streams of completely commercial-free music – guaranteed. 40 streams of news, sports and entertainment · Coast-to-Coast reception and Digital-quality sound All music content is selected and developed in-house by Sirius’ team of Master Music Programmers – talented and seasoned professionals who l
Summary of the content on the page No. 3
Cautions and Warnings 1. Do not install the Shuttle in a position that hinders your view through the windshield, or obstructs view ing of the dashboard indicators and displays. 2. Do not install the unit where it may obstruct the operation or deployment of safety devices, such as airbags, etc. 3. Do not allow operation of the unit to detract from safe driving practices; remember that you are responsible as the vehicle operator to adhere to all safe driving and traffic regulations. 4. This unit c
Summary of the content on the page No. 4
Contents SIR-CK1 and SIR-CK2 HARDWARE KIT - P/N 150-1519 Install Manual Base Audio Cable P/N 1286813 P/N 136C3484 P/N 112B3293 Phillips Machine Split Lock Washer, M4 Screw (M4 x 8mm) 1 pc. 1 pc. 1 pc. 4 pcs 4 pcs. Antenna Cradle CK1 P/N 136D3471 Flat Washer, M4 3/4” W X 3”Long P/N 118C1126 or Double Sided Tape Cradle CK2 P/N 136D3479 4 pcs. 1 pc OPTIONAL 1 pc. Alcohol Swab FM Switching Box Assy DC Power Adapter P/N 112C3159 (6 Meter) P/N 112B3294 1 pc. 1 pc. 1 pc. 1 pc. -4- 128-6813 4 of 14
Summary of the content on the page No. 5
Setting Up and Installing Your Kit Installation/Wiring Precautions NOTE:The SIRIUS® signal can be received and 1. To prevent a short-circuit, be sure to turn off the processed virtually anywhere as long as there ignition and remove the negative (-) battery cable are no obvious satellite signal obstructions such prior to installation. Connect power wires last. as nearby buildings, high terrain, parking 2. Do not install the unit in the locations exposed to garages or tunnels. direct sunlight or,
Summary of the content on the page No. 6
Interconnect Diagram Interconnect Diagram FM Option FM FREQUENCY SELECTION SWITCH. AUDIO SELECT 1 OF 4 AVAILABLE FREQUENCIES VEHICLE CABLE AND SET YOUR EXISTING CAR RADIO TO VEHICLE RADIO SHUTTLE CRADLE THE SAME FREQUENCY. FM RADIO ANTENNA CK1 OR CK2 SHUTTLE CRADLE CK1 ONLY TO AUXILIARY AUDIO INPUT OF RADIO OR DC POWER ENTERTAINMENT SYSTEM ADAPTER TO VEHICLE TO VEHICLE +12 VDC POWER ** +12 VDC POWER RECEPTACLE OR ** RECEPTACLE OR NOTE: 1. THE FM TRANSMITTER OPTION MUST BE SET TO ”FM ON” IN THE S
Summary of the content on the page No. 7
d. The cradle contains two mounting plates, CAUTION: Do not install the mounting base one on the rear and one on the bottom. on a leather or fabric surface, or After deciding which configuration to use, in a position that could impair loosen and remove two flat-head screws your vision, block air bag(s) or securing the plate to the cradle and remove obstruct vehicle dashboard the plate. Save the two screws for reassembly. controls and/or radio CD/casette operational displays. REAR NOTE: The adhes
Summary of the content on the page No. 8
h. If the outside air temperature is cold, it may f. Insert the end of the ball strut into the keyed be beneficial to warm the adhesive backing opening on the cradle mounting plate, and on the base using a portable hair dryer, or secure the plate to the ball strut using the by holding the backing surface in front of a flatwasher, lockwasher and flat-head screw vehicle heater vent. through the back of the plate. i. Remove the plastic liner from the adhesive g. Reattach the mounting plate assembl
Summary of the content on the page No. 9
NOTE: Allow a 72-hour period for the adhesive 4. Using Other Manufacturer’s Mounts backing to cure completely. The Shuttle Cradle can also be installed using other k. Using the star nut, attach the cradle assembly manufacturer’s mounts; the mounting plate to the base threaded socket; do not overtighten provisions on the rear and bottom of the cradle the star nut. provide you with multiple mounting options within the vehicle using various vehicle-specific 3. Installing the Cradle Using Double-Si
Summary of the content on the page No. 10
TOP RETAINING 16-PIN SYSTEM (Part No. 112C3159) is available and provides a CONNECTOR CLIP hard-wired FM output when connected to the FM OUT SAT. (MAIN) connector on the left side of the cradle; the other end RF CONNECTOR of the switching box plugs into the antenna jack of your TERR. RF CONNECTOR radio. By using this assembly, and selecting the appropriate FM output frequency (88.1MHz, 88.3MHz, BOTTOM BOTTOM 88.5MHz or 88.7MHz) with the slide switch, the Sirius LEFT SLIDE RIGHT signal received a
Summary of the content on the page No. 11
7. Mounting the Vehicle Antenna The antenna should be placed on a relatively flat SHUTTLE surface on the vehicle exterior, preferably on the (TYPICAL) roof (high point) or on the trunk (convertible). To mount the antenna: a. Plug the antenna into the SAT. (MAIN) connector on the back of the cradle. b. Place the antenna at the preferred location on the roof or trunk surface. If the vehicle is +12 VDC equipped with a roof or trunk rack, the antenna ADAPTER may have to be mounted off-center on the
Summary of the content on the page No. 12
e. Plan the routing of the antenna cable to the Shuttle RF input. Make sure you avoid any obstructions that could crimp, kink or twist the cable; use protective grommets wherever rough openings are encountered. f. Route the cable from the antenna position to the interior of the vehicle, working the cable under the rear window molding; make adjustments and take up slack whenever necessary. ANTENNA g. At the lowest point of the rear window, route the cable into the trunk, taking advantage of exist
Summary of the content on the page No. 13
i. Plug the antenna cable into the SAT (MAIN) connector on the back of the cradle; then plug the cigarette lighter adapter into the lighter receptacle. The integral power LED of the power button ( ) will light red. j. You are now ready to enjoy Sirius programming within your vehicle. CAUTION: You could drain the vehicle battery if the cigarette lighter adapter remains plugged in after the ignition is turned off. Unplug the adapter to prevent this possibility. -13- 128-6813 13 of 14
Summary of the content on the page No. 14
12 MONTH LIMITED WARRANTY AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor. To obtain repair or replacement within the terms of thi
