Summary of the content on the page No. 1
Single Line Business Telephones
®
Desk, Wall, and Trimline Models
User’s Guide
999-500-270
Issue 4
July 2003
Summary of the content on the page No. 2
NOTICE While reasonable efforts were made to ensure that the information in this document was complete and accurate at the time of printing, Avaya Inc. can assume no responsibility for any errors. Changes or corrections to the information contained in this document may be incorporated into future issues. HEARING AID COMPATIBILITY These telephones are compatible with inductively coupled hearing aids as prescribed by the Federal Communications Commission (FCC), except for Models 223C and 224
Summary of the content on the page No. 3
Introduction This booklet contains installation and removal instructions for standard modular desk or wall telephones. Installation of the following options requires a professional installer. Adjunct Dialer SPOKESMAN® Loudspeaker External Speakerphone Headset Adapter Contact your place of purchase for details. Package Content Make sure your package contains the following items: Telephone Handset Handset cord Line cord Number card 1
Summary of the content on the page No. 4
Modular Outlet Requirement You must have a standard modular telephone jack, such as one of those shown below, to install your phone. If you have one of these jacks already mounted, no tools are needed. FIGURE 1 Standard Modular Telephone Jacks If you do not have a standard modular telephone jack, contact your local telephone company or Avaya Inc. for details on converting your present outlet to a modular jack. 2
Summary of the content on the page No. 5
Installation Your telephone is fully assembled except for the coiled handset cord and clear line cord. To Install Your Desk Or Trimline Telephone 1. Plug one end of the coiled handset cord into the opening in the handset. Push the plug in until it clicks (Figure 2). 2. Plug the other end of the cord into the side opening in the base. Push the plug in until it clicks. 3. Plug one end of the clear line cord into the jack in the base of the telephone. Push the plug in until it clicks. FIGURE 2
Summary of the content on the page No. 6
FIGURE 3 Setting the Ringer Volume Control (Desk and Trimline Telephones) 4. Plug the other end of the cord into the telephone jack in your office. Push the plug in until it clicks. 5. Turn your telephone over or for Trimline telephones, lift the handset (Figure 3). 6. Set the ringer volume switch or thumbwheel to the setting you want. 4
Summary of the content on the page No. 7
To Install Your Wall Telephone 1. Align the wall phone plug with the jack, then line up the hole in the back of the telephone set with the rivets on the wall outlet plate. Push in and slide the telephone down into place (Figure 4). 2. Plug one end of the coiled handset cord into the jack in the handset. Push the plug in until it clicks. 3. Plug the other end of the cord into the jack in the bottom of the wall base. Push the plug in until it clicks. 4. Adjust the ringer volume switch on the u
Summary of the content on the page No. 8
FCC Registration Information Statement (Part 68) The following information is applicable only to equipment connected directly to the telephone network and not to connection of stations behind terminal systems. The following equipment is registered with the Federal Communications Commission (FCC) in accordance with Part 68 of its Rules: Apparatus Code* Standard Network Interface Jack(s) 500ADM RJ11C, RJ14C, RJ36X 500BDM RJ11C, RJ14C, RJ36X 500MM RJ11C, RJ14C,RJ36X 500SM RJ11C, RJ14C, RJ36X 503
Summary of the content on the page No. 9
In compliance with the rules, you should be aware of the following: 1. Connection of this equipment to the telephone network must be through one of the standard network interface jacks listed above. These may be ordered from the local telephone company or through Avaya Inc. as your authorized agent. 2. Customers connecting equipment to the telephone network shall, upon request of the local telephone company, provide the following information: The telephone number assigned to the line used
Summary of the content on the page No. 10
CAUTION The following safety information is important to you. All of the telephones listed, with the exception of message waiting models, are NOT FOR RESIDENTIAL USE. They are sold for BUSINESS SYSTEMS APPLICATIONS ONLY. Use in a residential environment could result in an electrical short circuit when the telephone wiring is set up to provide other applications, e.g. appliance control, power transformers lighting telephones, etc. The AC power used in these applications may create a safety
