Summary of the content on the page No. 1
XL45
Summary of the content on the page No. 2
XL45 The Clarity Professional XL45 offers our patented Digital Clarity Power that uses digital technology to enhance the volume and clarity of your phone conversations. Up to 50 decibels of amplification, the XL45 is ideal for those with severe hearing loss or low vision.
Summary of the content on the page No. 3
XL45 Features Features • Up to 50 decibels of amplification • Digital Clarity Power™ • Four Tone Settings: Low Frequency, Flat Amplification, Clarity Power and MBC Low • ClarityLogic™ • Talking Keypad • Speakerphone • Outgoing Speech Amplification up to 15 decibels • Large LCD Screen with Large Font • CID/Call Waiting • Four Memory Speed Dial Locations • Headset and Neckloop Port
Summary of the content on the page No. 4
Parts Checklist XL45 XL45 Handset Base Coiled Handset Cord Telephone Cords AC Adapter Mounting Bracket User Guide
Summary of the content on the page No. 5
Product Layout XL45 Large LCD Menu Screen Menu Button Memory Buttons Volume Slider Boost Button Tone Selector Speaker Button
Summary of the content on the page No. 6
Product Layout XL45 1. 1. Voice Mail/Missed Call Indicator The light will illuminate Green for a new Voice Mail and Orange when the voice mail feature is active. The light will display Red when the Ringer is OFF (when there is not a voice mail message). 2. Missed Call Indicator This light will illuminate when there is a missed call. (Active when Missed Call switch is ON) 3. Visual Ringers The visual ringers will flash to alert of an incoming call. 4. Low Battery Indicator 4. 3. 2. Thi
Summary of the content on the page No. 7
Product Layout XL45 1. Ringer Tone 2. Ring Volume 3. Ringer On/Off 4. Headset Port (2.5 mm) 5. Outgoing Speech Amplification (15 decibels) 6. Neckloop Port (3.5 mm)
Summary of the content on the page No. 8
Product Layout XL45 7. Bedshaker Port 8. Phone Line 9. AC Adapter
Summary of the content on the page No. 9
Product Layout XL45 Bottom View 1. Talk Keypad Switch 2. Boost Override Switch 3. Missed Call Switch 4. Voice Mail Switch 5. Tone/Pulse Switch
Summary of the content on the page No. 10
Installation XL45 1. Connect telephone line to “Line” jack of phone and to the wall jack 2. Connect handset cord to telephone 3. Connect AC Adapter to telephone, and then to wall outlet
Summary of the content on the page No. 11
DCP: Boost XL45 The BOOST button controls the loudness of the receiver. Once the BOOST button is pressed, an extra level of amplification is added over the entire range of the Volume Control. BOOST also activates the Tone Settings On the bottom of the XL45, there is a Volume Reset Override switch. When this is set to “On” the Boost function is automatically enabled every time the phone is picked up.
Summary of the content on the page No. 12
DCP: Tone Settings XL45 The XL45 offers four different tone settings to provide an experience that may be customized to fit a specific users need. The illustration above shows how the four settings relate to each other and the amount of amplification they give to the different frequencies of sound. The best way to choose between the settings is to listen to them all and decide which one provides the best telephone conversation experience.
Summary of the content on the page No. 13
DCP: Tone Settings XL45 The first tone setting is one that emphasizes the low frequency sounds. This is for those who have a hard time hearing lower pitched sounds. This type of hearing need is common with those who have noise-induced hearing loss.
Summary of the content on the page No. 14
DCP: Tone Settings XL45 The second tone is a flat amplification of all sounds. For the user who wants full volume amplification for every type of sound. Suggested if the user wears a digital hearing aid while using the phone.
Summary of the content on the page No. 15
DCP: Tone Settings XL45 The third tone setting is our set Clarity Power that begins to focus more on the higher frequency sounds and add speech intelligibility. It is a medium between tone setting two (2) and four (4).
Summary of the content on the page No. 16
DCP: Tone Settings XL45 The fourth tone setting provides full emphasis on speech intelligibility using Clarity’s Multi-Band Compression. This setting intelligently amplifies the human voice and reduces noise and sharp sudden sounds during the telephone conversation.
Summary of the content on the page No. 17
Program Memory XL45 Phone numbers can be stored into the phone’s memory to enable one button dialing. The phone directory allows space for four (4) different phone numbers. 1. Pick the MENU button, then press the down arrow to the “View Mem Dial” screen. 2. You will have the option to choose “1Yes” or “2 No”. Select “Yes” by pressing the one (1) button. 3. MemDial 1 or the saved name and number will appear. (To go to the next MemDial location press the down arrow) 4. Use the Delete Bu
Summary of the content on the page No. 18
XL45 Caller ID When there is a new incoming call the CID information will display on the second ring. The first row will have the caller’s ID name. (If there is no information, this will be blank.) The second row displays the telephone number of the incoming call. If the number is longer than 11 digits, the LCD will toggle the displayed number between the first 11 digits and the remaining digits. The time and date will automatically register after receiving your first call.
Summary of the content on the page No. 19
XL45 Caller ID View Caller ID 1. Press the Menu button. “View CID?” will display with the options of “1 Yes” or “2 No”. Select “Yes” by pressing the (1) one button and the most recent incoming call will be displayed. You can also access the CID records by pressing the up or down arrow keys. 2. Press the down arrow to view then next CID entry.
Summary of the content on the page No. 20
XL45 Caller ID Formatting CID and Call CID 1. Select your desired CID from your entry and press the Enter button. 2. “Pick Format” will appear on the screen first, then “Press UP/DN” will appear. Use the arrow keys to choose the desired format for the CID number and press the Enter button. Note: A seven digit number will not display the area code. A 10 digit number will display the area code without the one. The 11 digit will display the number, Area code pulse one. 1. The next screens t
