Jwin JT-P560 user manual

Summary of the content on the page No. 1

jWIN -- JT-P560

OWNER’S MANUAL
and
OPERATING INSTRUCTIONS


DESCRIPTION
1. Caller ID Speaker Phone 7. 8 Ringer Melody Selectable
2. English/French/Spanish selectable 8. Display Real Time, Date, and Year
3. 90 Incoming Call Memories 9. Baby Call Function for Emergency
including Name and Number One Touch Dialing
4. Built In Phone Book with 45 10. Music Hold
Memories
5. Enable to Review Last 16 Dial Out 11. Data Port
Record
6. LCD Contrast Adjustable (5 12. Digital Clock
Leve

Summary of the content on the page No. 2

INSTALLATION 1. Insert 3 “AAA” batteries. 2. Connect the phone with the telephone line. 3. Press [SET] to enter setup mode, then: - Use [UP], [DOWN] to select options. - Use [SET] to enter. - Use [DEL] to exit. SELECT LANGUAGE 1. Press [SET] to enter. 2. Use [UP], [DOWN] to select language options. 3. Use [SET] to confirm. SET AREA CODE 1. Press [SET] to enter. 2. Use [UP], [DOWN] to select a number. 3. Use [SET] to confirm. 4. Repeat steps 2 and 3 to select each number. LO

Summary of the content on the page No. 3

SET RINGING MELODY 1. Press [SET] to enter. 2. Use [UP], [DOWN] to select the desired ringing melody. 3. Press [SET] to confirm. PHONE BOOK ENTRY 1. Press [SET] to enter. 2. Enter Number by using the dialing keypad. 3. Press [SET] to confirm. 4. Enter the name by pressing the key which corresponds to the desired letter several times until the wanted letter appears. 5. Wait 2 seconds before entering the next letter. 6. Press [SET] to complete. PHONE BOOK EDIT 1. Press [SET] to e

Summary of the content on the page No. 4

REVIEW DIALED CALLS 1. Use [DIALED] to review the last dial out record, and 2. Press [DIALED] repeatedly to review all records. 3. Use [DEL] to delete a dialed call record. PHONE BOOK REVIEW AND DIAL OUT 1. Press [BOOK] to go to the phone book. 2. Use [UP], [DOWN] to review and select records, or 3. Enter the first letter of the record by pressing the corresponding key. You can press the same key continuously to go through a range beginning with the same letter. 4. Press [RD/BACK]

Summary of the content on the page No. 5

Modify the PIN Code 1. Press [CODE]. 2. Enter the preset PIN Code: 8888. 3. Press [CODE]. The LCD will display “UPDATE CODELOCK”. 4. Press [UP] to enter the modify mode. The LCD will display “MODIFY PIN CODE”. 5. Enter the desired personal PIN Code (must be 4 digits). 6. Press [CODE] to confirm. If you forget your pin code, do the following: 1. Remove the batteries. 2. Disconnect the unit from the telephone line for 3 hours. The pin code will reset back to the factory code “8888