Summary of the content on the page No. 1
Technical Product Manual
DCT1900 System
No part of this manual may be reproduced in any form, by print, photoprint, microfilm, or
any other means without prior written permission of the copyright owner.
© 2000-2005 LZB 119 2663 R8
Summary of the content on the page No. 2
© 2000-2005 LZB 119 2663 R8
Summary of the content on the page No. 3
Technical Product Manual - DCT1900 Preface Preface What this manual describes ... This manual describes how to configure, install, maintain and operate the DCT1900 Cordless Telephone System. It also describes the concepts and the hardware building blocks of the DCT1900 system to provide the reader with general knowledge about the system. Product specifications of the DCT1900 system products are also included. Who should use this manual ... This manual is written for telecommunication system
Summary of the content on the page No. 4
Technical Product Manual - DCT1900 Preface maintain the system with the help of the system's internal diagnostics and test facilities, and by using fault finding procedures. Section 8 Glossary This section contains abbreviations used in this manual. Section 9 Appendices This section includes the following: I -CSMW Installer’s User Guide II -Mini Installation and Maintenance Guide III -9p23 Users Guide IV -DT600 (DARLA) Portable User’s Guide V -DT620 (DIXIE) Portable User’s Guide VI -Remote Acce
Summary of the content on the page No. 5
Technical Product Manual - DCT1900 Safety and Regulatory Information Section 1 Safety and Regulatory Information Safety-DCT1900/R8/mw © 2000-2005
Summary of the content on the page No. 6
Technical Product Manual - DCT1900 Safety and Regulatory Information Safety-DCT1900/R8/mw © 2000-2005
Summary of the content on the page No. 7
Technical Product Manual - DCT1900 Safety and Regulatory Information, Table of Contents Table of Contents CHAPTER 1 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1.1 General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1-2 Electrostatic Sensitive Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 8
Technical Product Manual - DCT1900 Safety and Regulatory Information, Table of Contents II Safety-DCT1900/R8/mw © 2000-2005
Summary of the content on the page No. 9
Technical Product Manual - DCT1900 Safety and Regulatory Information, Safety CHAPTER 1 Safety 1.1 General Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. Note: Avoid touching or punching down the Base Station signal and power pairs as there is -4
Summary of the content on the page No. 10
Technical Product Manual - DCT1900 Safety and Regulatory Information, Safety 1.2 Electrostatic Sensitive Devices ATTENTION Boards which contain Electrostatic Sensitive Devices (ESD) are indicated by the sign. For handling these boards refer to Chapter 3 "Protection of Microcircuits against Electrostatic Discharge (ESD)". 1.3 Lithium Battery on CPU Board The following warning is applicable for the Lithium battery on the CPU board. CAUTION! DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY R
Summary of the content on the page No. 11
Technical Product Manual - DCT1900 Safety and Regulatory Information, Standards and Regulations CHAPTER 2 Standards and Regulations 2.1 Standards and Regulations The DCT1900 System adheres to the following standards and regulations: FCC Part 15 UL 60950 UTAM, Inc. ANSI/IEEE C95.1 PWT - Personal Wireless Telecommunications 2.2 Radio Equipment: Handsets and Base Stations FCC Part 15, Subpart B - "Unintentional Radiators" FCC Part 15, Subpart D - "FCC Rules for Radio Frequency Devices" FC
Summary of the content on the page No. 12
Technical Product Manual - DCT1900 Safety and Regulatory Information, Standards and Regulations FCC PART 15 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING CONDITIONS: 1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND 2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. UTAM REQUIREMENTS INSTALLATION OF THIS EQUIPMENT IS SUBJECT TO NOTIFICATION AND COORDINATION WITH UTAM, INC. ANY RELOCA
Summary of the content on the page No. 13
Technical Product Manual - DCT1900 Safety and Regulatory Information, Standards and Regulations THE TERM "IC:" BEFORE THE RADIO CERTIFICATION NUMBER ONLY SIGNIFIES THAT INDUSTRY OF CANADA TECHNICAL SPECIFICATION WERE MET. DO NOT TAMPER WITH THE WARRANTY SEAL ON THE BACK OF YOUR PHONE. TAMPERING WITH THIS SEAL CAN VOID YOUR WARRANTY. DO NOT ATTEMPT TO TAKE YOUR PHONE APART. DOING SO WILL VOID YOUR WARRANTY. YOUR PHONE DOES NOT CONTAIN CONSUMER SERVICEABLE COMPONENTS. SERVICE SHOULD ONLY BE P
Summary of the content on the page No. 14
Technical Product Manual - DCT1900 Safety and Regulatory Information, Standards and Regulations Exposure to Radio Frequency Signals (SAR) Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limit for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the US government and Canada. These limits are part of comprehensive guidelines and established permitted levels of RF energy for the general popu
Summary of the content on the page No. 15
Technical Product Manual - DCT1900 Safety and Regulatory Information, Protection against Electrostatic Discharge (ESD) CHAPTER 3 Protection against Electrostatic Discharge (ESD) 3.1 General Integrated circuits are sensitive to ESD. To avoid damage caused by ESD, service engineers and other people must handle equipment and boards carefully. Electronic equipment has become more resistive to ESD, but we see an increase of situations where static electricity can build up. This is caused by an incr
Summary of the content on the page No. 16
Technical Product Manual - DCT1900 Safety and Regulatory Information, Protection against Electrostatic Discharge (ESD) PROTECT ESD SENSITIVE DEVICES Boards with static sensitive devises can be recognized by the sign. Observe special handling rules. Changing a PCB in system requires a grounded WRIST STRAP Some of the benefits of CAUTION protection are: Static sensitive components * less failures/service calls Handle only at static * reduced maintenance costs safe workstation * high customer satis
Summary of the content on the page No. 17
Technical Product Manual - DCT1900 System Description Section 2 System Description System-DCT1900/R8/mw © 2000-2005
Summary of the content on the page No. 18
Technical Product Manual - DCT1900 System Description System-DCT1900/R8/mw © 2000-2005
Summary of the content on the page No. 19
Technical Product Manual - DCT1900 System Description, Table of Contents Table of Contents CHAPTER 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 CHAPTER 2 System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 2.1 Operational Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 20
Technical Product Manual - DCT1900 System Description, Table of Contents 4.13 Digital Line Unit - DLU (AWS1026) Lucent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10 4.14 Modular Cabinet Connection Board-MCCB (ROANB 101 28) . . . . . . . . . . . . . . . . . . . . . . . 4-11 4.15 Synchronization Distribution Board–SDB (REX-BRD0006 or ROANB 101 38) . . . . . . . . . . 4-11 CHAPTER 5 Other System Aspects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
