Nortel Networks Enterprise Edge M7208N user manual

Summary of the content on the page No. 1

Enterprise Edge
M7208N
User Card
© 2000 Nortel Networks
P0908518 Issue 02

Summary of the content on the page No. 2

Summary of the content on the page No. 3

Your Enterprise Edge M7208N telephone Display shows the time, date, call information, and guides you. Indicators appear beside lines and features. Hold button Feature button starts or ends a feature. Release button cancels active calls. Dial pad Volume control Memory and line buttons are buttons with indicators for one touch dialing, feature operation or line access. Using Button Check what is programmed on your memory buttons. Inquiry 1. Release all calls or lines with dial tone. 2. Press Ä¥â.

Summary of the content on the page No. 4

Making and answering calls Answering calls Answering calls using the handset When your telephone rings, or ¼ flashes beside an Intercom or line button: 1. Lift the handset. OR Press the button beside the flashing ¼ before lifting the handset. Answering calls using Handsfree When your telephone rings, or ¼ flashes beside an Intercom or line button: 1. Press ©. Making calls Depending upon the dialling mode programmed on your telephone, you may have to lift the handset before making a call. Â Ex

Summary of the content on the page No. 5

Programming memory buttons About memory buttons Memory buttons are the buttons with indicators other than line or Handsfree buttons. Memory buttons store telephone numbers or feature codes to give you one- touch dialling or feature activation. You can change what a memory button does by just programming it with a new number or feature. You cannot program a line or Handsfree button. Remember: Press Ä¥â to check a memory or line button. Programming External Autodial memory buttons 1. I

Summary of the content on the page No. 6

Setting up the telephone ATTENTION Before attempting to Connecting the cords carry out any work on the telephone, ensure that the line cord is unplugged 1 2 from the wall socket. Press here firmly To remove any of the cords, squeeze until it clicks, to the release latch on the plug and gently pull the plug from the socket. attach the stand. Connect the handset cord to the jack labelled with the telephone icon and route the cord as shown. If you are using a headset, route the cord alon

Summary of the content on the page No. 7

Setting up the telephone Mounting the telephone on the wall 12 cm P Pa age ge 5 E 5 En nt te erp rpri rise se E Edge dge M7 M720 208N 8N U Us se er r C Ca ard rd P0908518 Issue 02