Summary of the content on the page No. 1
Kramer Electronics, Ltd.
Preliminary
USER MANUAL
Model:
TP-305A
UXGA – Audio – RS-232 Line Receiver/DA
Summary of the content on the page No. 2
Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 2 3 Overview 3 3.1 About the Power Connect Feature 4 3.2 Shielded Twisted Pair (STP)/Unshielded Twisted Pair (UTP) 4 4 Your TP-305A UXGA - Audio - RS-232 Line Receiver/DA 5 4.1 The TP-305A UXGA - Audio - RS-232 Line Receiver/DA Underside 6 5 Connecting the TP-305A UXGA-Audio-RS-232 Line Receiver/DA 6 5.1 Connecting a Single TP-305A 6 5.2 Connecting Several TP-305A Units 8 5.3 Wiring the CAT 5 LINE IN
Summary of the content on the page No. 3
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1 1,000-plus different models now appear in 11 groups that are clearly defined by function. Thank you fo
Summary of the content on the page No. 4
S/PDIF S/PDIF LI INEN UXGA OUT LO INE UTPUTS AO UDIOUT RS-232 12V DC 12345 ANALOG S/PDIF XGA OUT LI INEN AO UDIOUT XGA IN XGA OUT LI INEN AO UDIOUT GTx RS-232 12V DC LO INE UT RS-232 RS-232AI UDION 12V DC RS-232 12V DC ANALOG ANALOG RS-232 VGA Audio VGA Getting Started 2.1 Quick Start This quick start chart summarizes the basic setup and operation steps of the TP-305A. Step 1: Connect the input and the outputs - see section 5 TP-305A 2 1 3 1 TP-123 STP Cable Range up to 300ft (100m) TP-124 S
Summary of the content on the page No. 5
Overview 3 Overview The TP-305A UXGA - Audio - RS-232 Line Receiver/DA receives a CAT 5 1 signal from a transmitter and distributes it to up to five other receivers (via CAT 5 cables). The TP-305A also decodes the CAT 5 signal and distributes it to a UXGA output, an analog audio output, a digital audio output and an RS-232 output. The TP-305A serves as a power center that can distribute power to both the transmitter and the connected receivers (see section 3. 1). In particular, the TP-
Summary of the content on the page No. 6
Overview 3.1 About the Power Connect Feature The Power Connect feature applies as long as the cable can carry power. This feature is available when using STP cable and the distance does not exceed 50m on standard CAT 5 cable. For longer distances, heavy gauge 1 cable should be used . For units which are connected via RJ-45 connectors, make sure that the shield of the STP cable is connected to the metal casing of the connectors on both ends of the cable. For units which are connected via
Summary of the content on the page No. 7
Your TP-305A UXGA - Audio - RS-232 Line Receiver/DA 4 Your TP-305A UXGA - Audio - RS-232 Line Receiver/DA Figure 1 and Table 1 define the TP-305A: Figure 1: TP-305A UXGA - Audio - RS-232 Line Receiver/DA Table 1: TP-305A UXGA - Audio - RS-232 Line Receiver/DA Features # Feature Function 1 POWER Switch Illuminated switch for turning the unit ON or OFF 2 LINK LED Lights when receiving a valid input signal 1 2 3 EQ. Trimmer Adjusts the cable compensation (equalization) level for the UXG
Summary of the content on the page No. 8
Connecting the TP-305A UXGA-Audio-RS-232 Line Receiver/DA 4.1 The TP-305A UXGA - Audio - RS-232 Line Receiver/DA Underside Figure 2 and Table 2 define the underside of the TP-305A Figure 2: TP-305A Underside Table 2: Features of the TP-305A Underside Feature Function 1 VS Switch Slide the switch down, to set the V SYNC to its input polarity (NORMAL) Slide the switch up, to set the VS to negative polarity (INVERT) 1 HS Switch Slide the switch down, to set the HS to its input polarity (
Summary of the content on the page No. 9
Connecting the TP-305A UXGA-Audio-RS-232 Line Receiver/DA RJ-45 connector on the TP-305A, via STP cabling (with a range of up to 300ft (up to100m)), see section 3. 2 2. On the TP-123, connect: A UXGA source (for example, the graphics card of a laptop) to the XGA IN 15-pin HD computer graphics video connector and an audio source to the Audio IN 3.5mm mini jack, for example, using a Kramer C-GMA/GMA cable (VGA HD15M +Audio jack to 1 VGA HD15M +Audio jack) An RS-232 cable with a 9-pin D
Summary of the content on the page No. 10
S/PDIF S/PDIF LI INEN UXGA OUT LO INE UTPUTS AO UDIOUT 12V DC RS-232 12345 ANALOG S/PDIF GTx XGA OUT LI INEN AO UDIOUT XGA IN XGA OUT LI INEN AO UDIOUT RS-232 12V DC LO INE UT RS-232 RS-232AI UDION 12V DC RS-232 12V DC ANALOG ANALOG RS-232 VGA Audio VGA Connecting the TP-305A UXGA-Audio-RS-232 Line Receiver/DA TP-305A TP-123 STP Cable Range up to 300ft (100m) TP-124 STP Cable Range up to STP Cable 300ft (100m) Range up to 300ft (100m) TP-124 Audio Audio Computer Graphics / Plasma Plasma Audio /
Summary of the content on the page No. 11
Connecting the TP-305A UXGA-Audio-RS-232 Line Receiver/DA 3. Connect the LINE OUTPUT 2 RJ-45 connector of the first TP-305A to the LINE IN RJ-45 connector of the third TP-305A. 4. Connect the LINE OUTPUT 3 RJ-45 connector of the first TP-305A to the LINE IN RJ-45 connector of the fourth TP-305A. 5. Connect the LINE OUTPUT RJ-45 connectors of each TP-305A unit, to the LINE IN RJ-45 connectors of the appropriate receivers, as illustrated in Figure 4. 6. On each TP-305A unit, connect the 1
Summary of the content on the page No. 12
Connecting the TP-305A UXGA-Audio-RS-232 Line Receiver/DA 5.3 Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors Table 3 and Figure 5 define the UTP CAT 5 PINOUT, using a straight pin to pin cable with RJ-45 connectors: Figure 5: CAT 5 PINOUT Table 3: CAT 5 PINOUT EIA /TIA 568A EIA /TIA 568B PIN Wire Color PIN Wire Color 1 Green / White 1 Orange / White 2 Green 2 Orange 3 Orange / White 3 Green / White 4 Blue 4 Blue 5 Blue / White 5 Blue / White 6 Orange 6 Green 7 Brown / White
Summary of the content on the page No. 13
Technical Specifications 6 Technical Specifications 1 Table 5 includes the technical specifications of the TP-305A: Table 5: Technical Specifications of the TP-305A INPUT: 1 LINE IN on an RJ-45 connector OUTPUTS: 5 LINE OUT on RJ-45 connectors 1 UXGA video output on a 15-pin HD connector 1 audio output on a 3.5mm mini jack connector 1 S/PDIF output on an RCA connector 1 2-pin terminal block for 1 RS-232 TxD out line MAX. OUTPUT LEVEL: Video: 1.6V; Audio: 2.3V POWER OUTPUTS: 12V DC 0.5
Summary of the content on the page No. 14
LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRA NTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product. The following ar
Summary of the content on the page No. 15
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution P/N: 2900- 000365 Rev: 3 Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.com P/N: 2900-00
