Summary of the content on the page No. 1
OWNER’S
MANUAL
SX525
SX570
SX650
models SX690
Summary of the content on the page No. 2
CONGRATULATIONS Congratulations for choosing a Directed Featuring silk dome tweeters, a shallow SX neodymium component speaker injection molded basket with metallized system from Directed Electronics. polypropylene vacuum-formed cones and neodymium motors, the Directed Directed Electronics has been the SX line of automotive speakers will industry leader in high-quality automo- excite and delight the auto sound enthu- tive security and audio equipment since siast with years of high quality audio
Summary of the content on the page No. 3
LIMITED TWO-YEAR CONSUMER WARRANTY Directed Electronics, Inc. promises to the MERCHANTABILITY, FITNESS FOR PARTIC- original purchaser, to replace this product ULAR PURPOSE, AND WARRANTY OF NON- should it prove to be defective in workman- INFRINGEMENT OF INTELLECTUAL PROPERTY ship or material under normal use, for a ARE EXPRESSLY EXCLUDED TO THE period of two years from the date of MAXIMUM EXTENT ALLOWED BY LAW, AND purchase from the dealer as indicated by the DEI NEITHER ASSUMES NOR AUTHORIZES d
Summary of the content on the page No. 4
FEATURES Woofer Tweeter Low resonate mineral-filled vacuum- New hotter 19mm ferrofluid cooled formed polypropylene cone silk dome tweeter with neodymium magnet (6x9 25mm). Fiberglass-reinforced injection-molded basket. Crossover High-grade neodymium motor 6 dB/octave passive crossover with structure for higher efficiency. tweeter protection. WARNING High-powered car audio They may also impair a driver’s ability to systems may produce sound hear traffic sounds or emergency vehi- pressure lev
Summary of the content on the page No. 5
INSTALLATION PRECAUTIONS The Directed SX neodymium separates distortion or shorting of the speaker are designed for installation into factory leads to the chassis ground. Over- speaker locations, custom mounting sized holes will not allow the enclosures or any flat mounting surface mounting screws to make sufficient inside the vehicle with sufficient rear contact with the panel, allowing the clearance. The following precautions and speaker to become loose. instructions cover the basic and most
Summary of the content on the page No. 6
FIGURE 6—CONNECTION/ADJUSTMENT SINGLE AMPLIFIER BREAK AWAY RIM The model SX570 speaker has a break Break away the plastic using a pair of away rim to facilitate mounting as either pliers. Use care not to damage the a 6 X 8 or a 5 X 7 speaker. The speaker cone or tweeter. mounting size required varies depending The excess flashing left after removal of on the vehicle manufacturer. the rim may require clean-up. 6 6 © 2004 Directed Electronics, Inc
Summary of the content on the page No. 7
SPECIFICATIONS M Mo od de ell S SX X5 52 25 5 S SX X5 57 70 0 S SX X6 65 50 0 S SX X6 69 90 0 S Sy ys st te em m 60Hz–21kHz Frequency response 80Hz–21kHz 80Hz–21kHz 75Hz–21kHz 60 watts Power handling RMS 40 watts 40 watts 50 watts Power handling peak 80 watts 80 watts 100 watts 120 watts 4 Ohms Impedance 4 Ohms 4 Ohms 4 Ohms 40.5 g Magnet weight 30.2 g 30.2 g 30.2 g 16.6L Vas 3.4L 5.4L 7.3L Fs 80 Hz 80 Hz 75 Hz 60 Hz 0.66 Qts 0.53 0.64 0.63 Efficiency (1W/1M) 88dB 88dB 89dB 89dB 2.5” Mounting de
Summary of the content on the page No. 8
Quality Directed products are sold and serviced throughout North America and around the world Call 800 274 0200 for more information about our products and services © 2004 Directed Electronics, Inc. - All rights reserved - G34010.15.20.25 12-04
