Husqvarna 327HE4X user manual

User manual for the device Husqvarna 327HE4X

Device: Husqvarna 327HE4X
Category: Trimmer
Manufacturer: Husqvarna
Size: 1.54 MB
Added : 6/17/2013
Number of pages: 28
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Husqvarna 327HE4X. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Husqvarna 327HE4X.

For your convenience

If looking through the Husqvarna 327HE4X user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Husqvarna 327HE4X on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Husqvarna 327HE4X to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Husqvarna 327HE4X User manual - Online PDF
Advertisement
« Page 1 of 28 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Husqvarna 327HE4X but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Husqvarna 327HE4X. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1


Operator′s manual
327HDA65
X-series
327HE3 327HE4
X-series X-series
Please read the operator’s manual carefully and make sure you understand the instructions
before using the machine.
E En ng glliis sh h
E En ng glliis sh h

Summary of the content on the page No. 2

KEY TO SYMBOLS Symbols WARNING! Incorrect or careless Always wear approved protective use of a hedge trimmer can turn it gloves. into a dangerous tool that can cause serious or even fatal injury. It is extremely important that you read and understand the contents of this operator’s manual. Wear sturdy, non-slip boots or shoes. Please read the operator’s manual carefully and make sure you understand the instructions before Noise emission to the environment usi

Summary of the content on the page No. 3

CONTENTS Contents Note the following before KEY TO SYMBOLS starting: Symbols ................................................................ 2 Please read the operator’s manual carefully. CONTENTS Contents ............................................................... 3 WARNING! Long-term exposure to noise can result in permanent hearing Note the following before starting: ........................ 3 ! impairment. So always use appr

Summary of the content on the page No. 4

INTRODUCTION Dear Customer, Congratulations on your choice to buy a Husqvarna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Husqvarna River, for production of muskets. The location was logical, since water power was harnessed from the Huskvarna River to create the water- powered plant. During the more than 300 years of beeing, the Husqvarna factory has produced a lot

Summary of the content on the page No. 5

WHAT IS WHAT? 327HE4 327HDA65 What is what? 1 Cutter 16 Air purge 2 Grease nipple and plug for filling lubricant. 17 Air filter cover 3 Bevel gear 18 Clutch cover 4 Blade guard (327HDA65) 19 Hand guard mounting screw (327HDA65, 327HE3) 5 Shaft 20 Angle adjustment handle (327HE3, 327HE4) 6 Front handle (327HDA65, 327HE3) 21 Angle adjustment knob 7 Front handle (327HE4) 22 Hand guard (327HDA65, 327HE3) 8 Throttle control 23 Combination spanner 9 Stop switch 24 Operator′s manual 10 Throt

Summary of the content on the page No. 6

GENERAL SAFETY PRECAUTIONS Important Personal protective equipment IMPORTANT! IMPORTANT! The machine is only designed for cutting branches and Incorrect or careless use of a hedge trimmer can turn it twigs. into a dangerous tool that can cause serious or even fatal injury. It is extremely important that you read and Never use a machine that has been modified in any way understand the contents of this operator’s manual. from its original specification. You must use approve

Summary of the content on the page No. 7

GENERAL SAFETY PRECAUTIONS CLOTHING the throttle control is automatically locked at the idle setting. Wear clothes made of a strong fabric and avoid loose clothing that can catch on twigs and branches. Always wear heavy, long pants. Do not wear jewellery, shorts A sandals or go barefoot. Secure hair so it is above shoulder level. FIRST AID KIT Always have a first aid kit nearby. B Make sure the throttle control is locked at the idle setting when the throttle lockout

Summary of the content on the page No. 8

GENERAL SAFETY PRECAUTIONS position then the carburettor idle setting must be adjusted. Vibration damping system See instructions under the heading Maintenance. Your machine is equipped with a vibration damping system that is designed to minimize vibration and make operation easier. Stop switch The machine′s vibration damping system reduces the Use the stop switch to switch off the engine. transfer of vibration between the engine unit/cutting equipment and the machine′s handle unit. Regu

Summary of the content on the page No. 9

GENERAL SAFETY PRECAUTIONS a spark arrestor mesh. Check whether the muffler on your Blades machine is fitted with this kind of mesh. To ensure good cutting results it is important that the contact pressure between the blades is correct. The contact pressure is adjusted by turning the screws on the underside of the bar clockwise as far as they will go. Then turn the screws anticlockwise a 1/4 turn. Lock the screws using the locking nut on the top of the bar. Check that the screws are loose e

Summary of the content on the page No. 10

ASSEMBLY Fitting the hand guard and loop Fitting the handle handle (327HE3, 327HE4) (327HDA65, 327HE3) Fit the handle using two screws. 1 Assemble the hand guard and loop handle by screwing them together. Take care to align the holes in both parts. (327HDA65) Fitting the cutting head (327HDA65) 2 Slide the loop handle and hand guard onto the shaft. (327HDA65) 3 Slide the spacer into the slot in the loop handle. 4 Fit the nut and screw. Do not overtighten. It is important that the hedge trimme

Summary of the content on the page No. 11

ASSEMBLY Adjusting the harness (327HE4) You should always use the harness with the machine to give maximum control over the machine and reduce the risk of fatigue in your arms and back. 1 Put on the harness. 2 Hook the machine onto the harness support hook. 3 Adjust the length of the harness so that the support hook is roughly level with your right hip. Fitting the impact guard (327HE4) Fit the guard using the three screws and washers. Fit the two short screws in hole A. Tighten the screws t

Summary of the content on the page No. 12

FUEL HANDLING Petrol Fuel safety Never start the machine: 1 If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate. CAUTION! Always use a quality petrol/oil mixture at least 2 If you have spilt fuel on yourself or your clothes, 90 octane (RON). If your machine is equipped with a change your clothes. Wash any part of your body that catalytic converter (see chapter on Technical data) always has come in contact with fuel. Use soap and water. use a good qual

Summary of the content on the page No. 13

FUEL HANDLING Mixing Fuelling • Always mix the petrol and oil in a clean container intended for fuel. • Always start by filling half the amount of the petrol to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of WARNING! Taking the following petrol. precautions, will lessen the risk of fire: ! • Mix (shake) the fuel mixture thoroughly before filling the machine’s fuel tank. Do not smoke or place hot objects near fuel. Always shut off the engi

Summary of the content on the page No. 14

STARTING AND STOPPING Check before starting Starting and stopping • Inspect the working area. Remove any objects that WARNING! The complete clutch cover could be thrown out. and shaft must be fitted before the ! • Check the cutting attachment. Never use blades that machine is started, otherwise the clutch are dull, cracked or damaged. can come loose and cause personal injury. Always move the machine about 3 metres from the refuelling position before starting. Place the machine on a firm s

Summary of the content on the page No. 15

STARTING AND STOPPING CAUTION! Do not pull the starter cord all the way out and do not let go of the starter handle when the cord is fully extended. This can damage the machine. CAUTION! Do not put any part of your body in marked area. Contact can result in burns to the skin, or electrical shock if the spark plug cap has been damaged. Always use gloves. Do not use a machine with damaged spark plug cap. Stopping The engine is switched off by moving the stop switch to the stop position. C

Summary of the content on the page No. 16

WORKING TECHNIQUES • Never work from a ladder, stool or any other raised General working instructions position that is not fully secured. IMPORTANT! This section takes up the basic safety precautions for working with a hedge trimmer. If you encounter a situation where you are uncertain how to proceed you should ask an expert. Contact your dealer or your service workshop. Avoid all usage which you consider to be beyond your capability. WARNING! The machine can cause serious personal injury.

Summary of the content on the page No. 17

WORKING TECHNIQUES • Always lay the machine on the ground when you are • Adjust the throttle setting to suit the load. not using it. • When trimming a hedge the engine should always • Do not cut too close to the ground. Stones and other face away from the hedge. objects can be thrown out. • Hold the machine as close to your body as possible to • Check the working area for foreign objects such as get the best balance. electricity cables, insects and animals, etc, or other objects that could da

Summary of the content on the page No. 18

WORKING TECHNIQUES (327HDA65) Transport position • Undo the knob. (327HE4) Once the work has been completed fold the cutting unit back against the shaft to simplify transport and storage of the hedge trimmer. 1 Turn off the engine. 2 Loosen the knob on the shaft (clockwise). • Press the cutting unit against the hedge or some other firm surface until the required angle is set. 3 Grip the handle on the cutting unit and angle the cutting unit upwards. At an angle of 90 degrees there is a stop p

Summary of the content on the page No. 19

MAINTENANCE Basic setting Carburettor • The basic carburettor settings are adjusted during Your Husqvarna product has been designed and testing at the factory. The basic setting is richer than manufactured to specifications that reduce harmful the optimal setting and should be maintained for the emissions. After the engine has used 8-10 tanks of fuel first few hours the machine is in use. The carburettor the engine will be run-in. To ensure that it continues to run should then be finely adj

Summary of the content on the page No. 20

MAINTENANCE cause fire if directed against dry and combustible Cooling system material. To keep the working temperature as low as possible the machine is equipped with a cooling system. 4 3 2 Some mufflers are equipped with a special spark arrestor mesh. If your machine has this type of muffler, you should clean the mesh at least once a week. This is best done with a wire brush. 1 The cooling system consists of: On mufflers without a catalytic converter the mesh should 1 Air intake on the star


Alternative user manuals
# User manual Category Download
1 Husqvarna 12 RC User manual Trimmer 32
2 Husqvarna 123HD65X User manual Trimmer 15
3 Husqvarna 123L User manual Trimmer 22
4 Husqvarna 123HD60 User manual Trimmer 32
5 Husqvarna 123HD60, 123HD65 User manual Trimmer 83
6 Husqvarna 123LD User manual Trimmer 12
7 Husqvarna 124C User manual Trimmer 77
8 Husqvarna 125C User manual Trimmer 110
9 Husqvarna 125C, 125L User manual Trimmer 277
10 Husqvarna 124L User manual Trimmer 2
11 Husqvarna 125LDx User manual Trimmer 119
12 Husqvarna 125E User manual Trimmer 3
13 Husqvarna 128 C User manual Trimmer 59
14 Husqvarna 123C User manual Trimmer 8
15 Husqvarna 128C User manual Trimmer 148
16 Sony PCS-G70P User manual Trimmer 12
17 Sony PCS-G70 User manual Trimmer 12
18 ABC Office 440 User manual Trimmer 2
19 Sony 370A User manual Trimmer 83
20 ABC Office 448 User manual Trimmer 2