Summary of the content on the page No. 1
Operating Instructions
3D Eyewear
Model No.
TY-EW3D10U
Contents
This product cannot be used as Safety Precautions ······························ 2
Identifying Controls ····························· 4
sunglasses.
Using Precautions ······························· 5
Using for the fi rst time ························· 7
Accessories ········································· 7
Using the 3D Eyewear ························ 8
Storage and Cleaning ························· 9
Replacing the batteries ····
Summary of the content on the page No. 2
Safety Precautions Warning About Prevention of Accidental Ingestion Do not store batteries or the band accessory in places where small children can reach. There is a danger small children could swallow such parts by mistake. If a child accidentally swallows such parts, seek immediate medical attention. About Prohibition of Disassembly Do not disassemble or modify the 3D Eyewear. Doing so may result in fire, or in a malfunction that may cause the user to feel unwell. About Lithium Battery
Summary of the content on the page No. 3
About Viewing of 3D Images Do not move around while wearing the 3D Eyewear. The surrounding area appears dark, which may result in falling or other accidents that may cause injury. In the event that you experience dizziness, nauses, or other discomfort while viewing 3D images discontinue use and rest your eyes. Parents/guardians should monitor children's viewing habits to avoid their prolonged use without rest periods. About Lithium Battery Danger of explosion if battery is incorrectly
Summary of the content on the page No. 4
Identifying Controls Battery case Fitting the battery ( page 9) When using for the first time, remove the insulating sheet. ( page 7) Infra-red receiver Receives infra-red signals from the television. The liquid crystal shutter open/close timing is controlled by receiving infra-red signals from the television, which provide 3D expression of the images. Nose pad installation section (3D Eyewear inner section) ( page 7) Specialized band can be attached here. ( page 7) Liquid Crystal
Summary of the content on the page No. 5
Using Precautions Liquid Crystal Shutter (Lens) Do not apply pressure to the liquid crystal shutter. Also, do not drop or bend the 3D Eyewear. Do not scratch the surface of the liquid crystal shutter with a pointed instrument etc. Doing so may cause damage to the 3D Eyewear, and reduce the quality of the 3D image. Infra-red receiver section Do not soil the infra-red receiver section or attach stickers etc. to it. • Doing so may prevent the receiver from receiving signals from the te
Summary of the content on the page No. 6
For comfortable viewing View the screen at a distance at least 3 times further than the effective height of the screen. Recommended distance: For a 50-inch television 1.9 m (6’2”) or more For a 54-inch television 2.0 m (6’6”) or more For a 58-inch television 2.3 m (7’6”) or more For a 65-inch television 2.4 m (7’10”) or more Using the 3D Eyewear at a distance closer than the recommended distance may cause eyesight fatigue. When the top and bottom area of the screen is blackened, such
Summary of the content on the page No. 7
Using for the first time Remove the insulating sheet Attach the specialized band If the 3D Eyewear slips out of place, use the specialized band included to hold it in place. Specialized band Attach the band to the left and right tips of the frame, and adjust the length. Insulating sheet Attach the nose pad If required, use the included nose pad. Nose pad A adjusts the attachment position of the 3D Eyewear between 2 vertical levels. (Slot 2 of the 3 protrusions on the 3D Eyewea
Summary of the content on the page No. 8
Using the 3D Eyewear Using the television menu controls, set so that 3D images are shown. 1. (When 3D image signals are being received) press the MENU button on the television remote control. 2. Select "Setup", and press the OK button. 3. Select "3D settings", and press the OK button. 4. Select "3D Eyewear", and use to select "On" or "Off". The procedure above is only an example. For details, see the television operating instructions. You can watch 3D images in the following cases. (As
Summary of the content on the page No. 9
Storage and Cleaning Clean using a soft, dry cloth. Wiping the 3D Eyewear with a soft cloth that is covered in dust or dirt may scratch the eyewear. Shake off any dust from the cloth before use. Do not use benzene, thinner, or wax on the 3D Eyewear, as doing so may cause the paint to peel off. Do not dunk the 3D Eyewear in liquid such as water when cleaning. Avoid storing the 3D Eyewear in hot or highly humid locations. Replacing the batteries When the power lamp does not light, replace
Summary of the content on the page No. 10
Troubleshooting/Q&A Are the image settings switched to 3D images? Some 3D image signals are not automatically recognized as 3D images. Set the television images to “On”. For details, see the television operating instructions. Is there a sticker or other such item blocking the infra-red reception section on the 3D Eyewear? The 3D Eyewear operates by receiving signals Images are not 3D. from the television. Check that there are no objects blocking the path between the television and 3D
Summary of the content on the page No. 11
Specifications Liquid Crystal Shutter Lens type Frame sequential type Batteries Coin-shaped lithium battery CR2032 (duration) (approx. 75 hours in a row) Width: 177 mm (6-15/16") Dimensions Height: 46 mm (1-25/32") Depth: 174 mm (6-27/32") Power supply DC 3 V Main body: Resin Materials Lens section: Liquid crystal glass Mass Approx. 63 g (approx. 2.22 ozs.) (including batteries) Transmitter for 3D Eyewear 1 Viewing range* Within 3.2 m (10'5") from front surface (Within 35° horizontal, 20°
Summary of the content on the page No. 12
Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus New Jersey 07094 U.S.A. Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario L4W 2T3 CANADA © 2010 Panasonic Corporation of North America. All Rights Reserved. Printed in China S0210-0
