Summary of the content on the page No. 1
USER'S GUIDE
32N3 SERIES 220-240 V
2
Thank You
3
Safety Instructions
4
Product View
5
Assembly
6-7
Operations
8-9
Maintenance and Care
10
Troubleshooting
11
Replacement Parts
12
Warranty
Summary of the content on the page No. 2
Thanks for buying a BISSELL PurePro™ Compact Vacuum We’re glad you purchased a BISSELL PurePro vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL canister vacuum is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My gr
Summary of the content on the page No. 3
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, ■ Young children should be supervised to basic precautions should be observed, ensure that they do not play with the including the following: appliance. ■ Remove plug from electrical outlet before Read all inst Ructions cleaning or maintaining the appliance. befo Re using you R bissell ■ If the supply cord is damaged, it must be caniste R vacuum. replaced by the manufacturer or its service agent in order to avoid a hazard.
Summary of the content on the page No. 4
Product view Handle Flex Hose Telescoping Extension Wand Carry Handle Bag Change Indicator Variable Suction Power Control Post-Motor Filter Power Button Automatic Cord Multi-Surface Rewind Button Brush Switch Floor Nozzle caution: Do not plug in your vacuum until you are familiar with all instructions and operating procedures. Upholstery Tool Crevice Tool Dusting Brush 4 w w w. b i s s e l l . c o m
Summary of the content on the page No. 5
Assembly 1. Connect swivel hose by firmly inserting it into the suction opening on the canister. WaRning : The hose will click into place when Plastic film can be danger- correctly inserted. ous. To avoid danger of suf- 2. Connect telescoping extension wand to focation, keep away from the handle end of the flex hose. Twist babies and children. slightly to tighten. 3. Connect floor nozzle to the end of the telescoping extension wand. Twist 1 2 slightly to tighten. 4. To extend telescopin
Summary of the content on the page No. 6
0perations Power cord the power cord is located at the rear of the vacuum. gently pull out the power cord, watching for the yellow line. stop pulling the power cord once Automatic Cord the yellow line is visible. there is also Rewind Button a red line, which indicates the end of the usable cord. do not pull the power cord out beyond the red line. automatic cord rewind your vacuum is equipped with an automatic cord rewind. When cleaning is finished, press the power button off and gra
Summary of the content on the page No. 7
0perations special tools continued crevice tool: Use the crevice tool in tight, narrow spaces. dusting brush: Attach dusting brush to the tip of the crevice tool to dust furniture, blinds, books, lamps, shelves and baseboards. variable suction power control the variable suction power control is located on the top of the vacuum. twist the dial control toward maX for maximum suction. twist the dial control toward min to minimize suc- tion for lightly soiled areas or delicate fabrics. Hi
Summary of the content on the page No. 8
Maintenance and care dust bag replacement 2. 1. Unplug the vacuum from electrical outlet. 2. Open the dust bag compartment by lifting up on the latch on the door on the front of the vacuum, until the door locks into place. 3. Close the filter bag by pulling the card- 3. board strap. This serves to cleanly seal the full dust bag. Lift out the dust bag holder and dust bag by pulling vertically on the convenient handle, located on top of the dust bag holder. 4. Release the dust bag from th
Summary of the content on the page No. 9
Maintenance and care Replacing the HePa media pre-motor filter continued 4. Replace the filter with a new HEPA media filter by having the tab, connected to the Tip: filter frame, on top and inserting the filter frame straight down into the filter holder. Change HEPA media filter every 6 months. Otherwise, efficiency note: the filter frame should be and air permeability will be placed so the protective frame is vis- reduced. ible. 5. Place dust bag holder and dust bag into the dust bag co
Summary of the content on the page No. 10
Troubleshooting WaRning : To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. vacuum cleaner won’t run Possible causes Remedies 1. Vacuum cleaner is not plugged in 1. Check electrical plug 2. Power button is not pressed down 2. Press power button down vacuum cleaner won’t pick up or low suction Possible causes Remedies 1. Tools, flex hose and/or telescoping 1. Remove each part and check for ext
Summary of the content on the page No. 11
Replacement parts - BISSELL vacuum Item Part No. Part Name 1 203-7553 Floor Nozzle 2 203-7554 Flexible Hose with Handle 3 203-7555 Telescoping Extension Wand 4 203-7556 Upholstery Brush 5 203-7557 Crevice Tool 6 203-7558 Dusting Bursh 1 2 3 4 5 6 11 w w w. b i s s e l l . c o m
Summary of the content on the page No. 12
Warranty - BISSELL PurePro™ vacuum This warranty gives you specific legal rights, and you may also have other rights which may vary from country to country. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, regular mail as described below, or contact your local in country distributor. limited one year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, BISSEL
