Summary of the content on the page No. 1
XDVD9101
INSTALLATION/OWNER’S MANUAL
DVD Multimedia Receiver with 7” Touch Screen Display
Safety Notes:
The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature
to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the
parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.
Summary of the content on the page No. 2
Copyright Notes This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Manufactu
Summary of the content on the page No. 3
XDVD9101 PREPARATION Table of Contents Page Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Preparation/Mounting/Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 Remote Control Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Control Locations - Monitor Closed
Summary of the content on the page No. 4
XDVD9101 PREPARATION WARNING Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage. Several states prohibit the installation of monitors/DVD players if the screen is visible
Summary of the content on the page No. 5
XDVD9101 OPERATION Safety Information Please read all instructions carefully before attempting to install or operate. Due to its technical nature, it is highly recommended that your DUAL XDVD9101 is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only. Safety Notes: The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-
Summary of the content on the page No. 6
XDVD9101 INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Remove 3 transit screws located on top of the unit. • Insert the supplied
Summary of the content on the page No. 7
XDVD9101 INSTALLATION Wiring Diagram - Inputs/Outputs Wiring Notes: Subwoofer output The SUBWOOFER audio output (Blue RCA) is active in all audio modes and must be connected to an external amplifier. Rear view camera A rear view camera (not included) can be used with the CAMERA input. Refer to page 64 for details. Need help? Call our Technical Service Hotline, 1-866-382-5476. 6
Summary of the content on the page No. 8
XDVD9101 INSTALLATION Wiring Diagram - Optional A/V Connections 7
Summary of the content on the page No. 9
XDVD9101 OPERATION IR Remote Preparation To first use the IR Remote control, Notes: you must first pull the battery • Remove the battery if the remote will insulation tape out not be used for a month or longer • Remove and dispose of battery properly To insert or replace the battery: Remove the battery holder Remove the battery from the battery holder Install the new battery Make sure to keep the (+) side up Insert the battery holder CAUTION!!! • Do not store battery with metallic objects
Summary of the content on the page No. 10
XDVD9101 OPERATION Control Locations - Monitor Closed 1 2 3 4 16 5 15 13 12 11 8 7 6 14 10 9 Display Channel/Chapter/Track Down/Fast Reverse 1 9 Secondary LCD Disc-In Indicator 2 10 Open/Close Monitor Infrared Sensor 3 11 4 3.5mm A/V Input 12 Band/Disc Stop 5 USB Input 13 Mode 6 Reset Mute/Loudness 14 7 Channel/Chapter/Track Up/Fast Forward Power/Volume/EQ 15 8 Play/Pause 16 Eject Secondary LCD Information 1 2 3 4 5 6 7 12 11 10 9 8 EQ indicator 1 Song title indicator 7 Loudness indicator 2
Summary of the content on the page No. 11
XDVD9101 OPERATION Control Functions - Monitor Closed Display When the monitor is closed, press DISP to toggle display between information available for the current mode such as clock, frequency, track or chapter information. Secondary LCD Additional LCD for system information while monitor is closed. Open Monitor Press OPEN to open or close the monitor. Be careful not to not touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur. 3.5mm A/V Inp
Summary of the content on the page No. 12
XDVD9101 OPERATION Control Functions - Monitor Closed Power Momentarily press PWR or any other button (except EJECT) to turn the unit on. Press PWR for more than 3 seconds to turn the unit off. Volume Turn the rotary to adjust the volume level lower or higher (0-46). The current volume level will be displayed on the secondary LCD when the monitor is closed. Turning the rotary while the volume is muted will cancel the mute function. EQ Preset Press the volume knob momentarily to select betwe
Summary of the content on the page No. 13
XDVD9101 OPERATION Control Locations and Functions - Monitor Open 1 Close Monitor 1 Screen Angle Up 2 3 Info/Picture 4 Screen Angle Down 4 3 2 Close Monitor Press CLOSE to open or close the monitor. Be careful not to not touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur. Info/Picture Press to display DVD disc information in DVD mode. Holding this button for 3 seconds brings up the Brightness setting, which can be adjusted by turning the rot
Summary of the content on the page No. 14
XDVD9101 OPERATION Control Locations - Remote 2 3 4 1 5 6 7 8 9 10 11 12 13 15 16 14 19 20 17 18 21 22 23 24 26 27 28 25 29 30 31 32 35 34 36 33 39 38 40 37 1 Power 16 Key #9 31 Root Mute/Loudness Escape Repeat 2 17 32 Open/Close Search Chapter/Track/Seek Tune Down 3 18 33 Mode Key #0/DVD Setup Chapter/Track/Seek Tune Up 4 19 34 Volume Up Audio Select Fast Reverse/Manual Tune Down 5 20 35 Key #1 Menu Fast Forward/Manual Tune Up 6 21 36 Key #2 4-Way - Up Zoom 7 22 37 Key #3 Play Audio 8 23 38 Vol
Summary of the content on the page No. 15
XDVD9101 OPERATION Control Functions - Remote Power Press once to turn the unit on, press again to turn unit off. Mute Press once to MUTE audio; press again to return audio. Press and hold to activate Loudness On/Off. Open Press once to open monitor; press again to close the monitor. Mode Press once to incrementally select desired source. Volume Up Increase VOLUME. Keys 0-9 Direct access chapter/track/preset stations 1 ~ 9. Volume Down Decrease VOLUME. Info Displays DVD information. Escape Exit
Summary of the content on the page No. 16
XDVD9101 OPERATION General Operation Power On/Off Momentarily press PWR or any other button (except EJECT) to turn the unit on. Hold for 3 seconds to turn the unit off. Mute Press MUTE to silence the audio; will appear in the OSD (On Screen Display). Press MUTE again to cancel. Loudness Press LOUD on the OSD to turn the Loudness on/off. Pressing and holding the MUTE button on the front panel or remote will also turn the Loudness on/off. Mode Press MODE to select between Tuner, Disc (which
Summary of the content on the page No. 17
XDVD9101 OPERATION General Operation Info Press INFO momentarily to display DVD disc information. Monitor Brightness Press and hold INFO for 3 seconds to change monitor BRIGHTNESS. Turn the rotary Q or P to adjust to desired level. (0 minimum/20 maximum; 10 is default). Color Setup When a video source is connected to the front or rear auxiliary inputs, press INFO for more than 2 seconds to adjust COLOR SETUP during video play. Press or to step to the desired menu option: COLOR SETUP Sharpn
Summary of the content on the page No. 18
XDVD9101 OPERATION General Operation - Main Menu 1 2 3 4 10 9 8 7 6 5 Main Menu Access There are two methods to access the MAIN menu: • Press MENU button on the remote control. • Touch MENU or the upper left corner of the touch screen from any mode. Touch Access Buttons 1) Touch to access AM/FM TUNER mode. 2) Touch to access CD/DVD mode (CD/DVD must be inserted). 3) Touch to access iPod mode (optional iPod must be connected to activate). 4) Current time is displayed. 5) Touch to access AUXILIA
Summary of the content on the page No. 19
L L L XDVD9101 OPERATION Main Setup - Menu Main Setup Menu • Press MAIN SETUP icon to access the Main setup mode. Page 1 • Select desired parameter you wish to change. • Page will return back to previous screen after 15 seconds of inactivity or by pressing the RETURN arrow in the top right corner. • Press the PAGE DOWN icon to access Main Setup page 2. MAIN Setup Menu matrix - page 1 Settings Default Options Function USA S-Amer1 Tuner USA Select appropriate tuner frequency spacing for your
Summary of the content on the page No. 20
L L XDVD9101 OPERATION Main Setup - Menu Main Setup Menu • Press MAIN SETUP icon to access the Main setup mode. Page 2 • Press the PAGE DOWN icon to access Main Setup page 2. • Select desired parameter you wish to change. • Page will return back to previous screen after 15 seconds of inactivity or by pressing the RETURN arrow in the top right corner. • Press the PAGE UP icon to access Main Setup page 1. MAIN Setup Menu matrix - page 2 Settings Default Options Function On TFT panel will aut
