Summary of the content on the page No. 1
MD-RECEIVER
KMD-PS970R
INSTRUCTION MANUAL
© B64-1409-00 (E) (MC)
99/12 11 10 9 8 7 6 5 4 3 2 1
Summary of the content on the page No. 2
Contents Before use Disc Search .................................................................................22 Safety Precautions ........................................................................3 Track / Disc Repeat .....................................................................22 Track Scan...................................................................................22 Basic operations Disc Scan ............................................................................
Summary of the content on the page No. 3
Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION You cannot connect the unit directly to the following CD automatic changers. For users To prevent injury and/or fire, take the To prevent damage to the machine, who want to use older changers with the following precautions: take the following precautions: unit, follow the directions below according to • Insert the unit all the way until it is fully • Make sure to ground the unit to a negative the type of changer you own: locked in place.
Summary of the content on the page No. 4
Summary of the content on the page No. 5
Basic operations u 4 d SRC FM ¢
44W 4 KMD-PS970R DISC EJECT DISP OFF 4V NAME.S PREOUT DAB System E's T I NF VOL ADJ PTY LOUD SCAN RDM REP D.SCN M.RDM MENU DISC ATT/LOUD MENU AM LOUD indicator — 5 —
Summary of the content on the page No. 6
Basic operations • Whilst the control panel is moving, pressing the buttons will not Power have any effect. Do not try to press the buttons on the control You can help prevent theft of the unit by reversing the faceplate panel as the faceplate is moving, as excessive force may so that the control panel cannot be seen, hiding the unit, and damage the unit. shutting off the audio. • During the forced closing of the unit (i.e., having the unit left closed whilst ignition is turned on), the faceplat
Summary of the content on the page No. 7
Switching Modes Attenuator This function allows you to turn down the volume quickly. Switching Modes: Each time you press the SRC button, the mode switches as Turning Attenuator On/Off: follows: Press the ATT button to switch the attenuator on and off. When the attenuator is off, the volume returns to the original Tuner mode level. NOTE MD mode Turning down the volume all the way turns off the attenuator External disc control mode function. AUX mode NOTE • The mode switches to the next mode from
Summary of the content on the page No. 8
Basic operations adjustment(Bright ##) Dimmer (Dimmer ON / OFF) Menu System Switching Graphic Display(Graphic ON / OFF) Black To accommodate a greater number of functions, a menu 3 Mask(BLK MASK OFF / ON) Dual zone system* (Zone 2 system has been employed for making settings. Press the OFF / ON) External Amplifier Control (AMP BASS Flat / +6 / MENU button to enter the menu mode and then display the +12) Manual Open Switch Setting (Open SW #) News function to make the setting. Details on eac
Summary of the content on the page No. 9
Tuner features Selecting Tuning Mode You can choose from three tuning modes: auto seek, preset station seek, and manual. The “AUTO 1” indicator lights up when auto seek tuning is selected, and the “AUTO 2” indicator ¢
4 SRC FM lights when preset station seek tuning is selected. 1 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. 44W 4 KMD-PS970R DISC EJECT DISP 2 OFF Press the ¢ button repeatedly until the tuning function 4V NAME.S PREOUT DAB
Summary of the content on the page No. 10
Tuner features Tuning 2 Press the ¢ button repeatedly until the local seek function appears in the display. 1 Press the SRC button repeatedly until the tuner mode is Press the 4 button to search in the other direction. obtained. "TUNER" is displayed only when the tuner mode is The function setting is indicated by "Local.S ON" or "Local.S selected. OFF" in the display, indicating that the local seek function is on 2 or off, respectively. Press either the FM or AM button to select the band. Each
Summary of the content on the page No. 11
NOTE 1 Select the band/ station that you want to have stored. • When the AF function is turned on whilst auto memory entry 2 Hold down the button (#1-6) that you want to use for the takes place, only RDS stations (i.e., stations with RDS capability) station, for two seconds or more. are stored. RDS stations that have been preset for FM1 cannot The button number blinks once in the display to indicate that also be preset in FM2 or FM3. the data has been stored. • When the local seek function is t
Summary of the content on the page No. 12
Tuner features NOTE Preset station seek with Programme service The £ indicator lights whilst the clock is displayed. name (Function of Remote) You can search for the preset station with Programme Service name. 1 Press the DNPP button on the remote control. Kenwood intelligent Twin IF (K2I) “SNPP” will be displayed once the seek mode is entered. The names of the stations preset in the band currently listened When the frequency of another station is too close to that of the station currently being
Summary of the content on the page No. 13
Summary of the content on the page No. 14
RDS features Turning Region Restrict Function On/Off: AF (Alternative Frequency) Function 1 Hold down the MENU button for one second or more. When poor reception is experienced, automatically switch to "MENU" is displayed and the menu mode is turned on. another frequency broadcasting the same programme in the same RDS network with better reception. 2 Press the ¢ button repeatedly until the Region restrict The ª indicator lights up when the AF function is turned function appears in the display. o
Summary of the content on the page No. 15
switches reception to the FM band. However, the MW/LW band 3 Switching settings is not returned to when the TI button is pressed again. Press either the AM button or FM button. Switching to a Different Traffic Information Station: The display and setting will change. Use the 4 / ¢ buttons to make an auto seek of the TI If the traffic information station you are tuned to experiences stations in a certain band. poor reception, this function automatically seeks another TP station. NOTE • When you a
Summary of the content on the page No. 16
RDS features Text Scroll Radio Text This function permits the text to be scrolled and the entire text You can display textual information being transmitted by RDS to be displayed. Switching between manual scrolling and stations. automatic scrolling is permitted. The factory default is manual Turning on Radio Text Display Mode: scrolling. Pressing the DISP button switches the display as follows. To scroll manually: Select the Radio Text Display mode. 1 Press the DISP button to display the Radio T
Summary of the content on the page No. 17
or more to display the name of the language currently used. “PTY” blinks in the display for about 30 seconds. If you want to change the language, press the preset button for If you make no key input in 30 seconds, the PTY selection the desired language and then the 38(PTY) button. mode will turn off automatically. English is #1, French is #2, German is #3, and Swedish is #4. NOTE 2 Select the type of programme to be received If no programme can be found, "NO PTY" is displayed. • Press either the
Summary of the content on the page No. 18
Summary of the content on the page No. 19
MD/External disc control features When a unit equipped with an O-N switch is to be connected, please also see the instruction manual of this unit. Set the O-N switch to "N". "N"-operation will be set. When a unit that is not equipped with an O-N switch, or the DISP/ FM/ changer switching unit "KCA-S200" is connected, "O"- 4 ¢
NAME.S Á
SRC DISC+ operation will be set. "N"-operation: • The disc title and track title of the CD text can be displayed. 44W 4 KMD-PS970R DISC EJECT • The disc name wi
Summary of the content on the page No. 20
MD/External disc control features Press the SRC button repeatedly to select the external disc Playing MDs control mode. The disc will start playing. Playing MDs: Press the Á(EJECT) button to slide open the faceplate, NOTE showing the MD (insertion) slot. Insert the MD in the proper The external disc control mode will differ, depending on the unit orientation. The faceplate will show the control panel, and the that is connected. MD will start playing. Mode Display Examples The ¢ indicator will li
