Summary of the content on the page No. 1
VM9410
Owner’s Manual
7-INCH TFT VM9410
OPEN
DVD-R AV AUX IN
VM9410
Push
ENTER
2-6CH
PWR SRC
LO/DX
Summary of the content on the page No. 2
CONTENTS Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s Tuner Operation................................................................................... 14 manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to Tuner TFT Display ..................................................................................................... 14 use all the features of your new Jensen VM9410 Mobile Multimedia AM/F
Summary of the content on the page No. 3
VM9410 PREPARATION Congratulations on your purchase of the Jensen VM9410 17. Last Playback Memory – When powering on the unit, Mobile Multimedia AM/FM/DVD Receiver. every setting and playing status remains the same as WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera) never use the when the unit was powered off. It’s a good idea to read all of the instructions before beginning video display function while driving the vehicle. This is a 18. Paren
Summary of the content on the page No. 4
Pus Pus h h A TFT TFT T 7-INCH DIGITAL TFT AM/FM/DVD/MP3 RECEIVER OPEN 7-INCH 7-INCH BAND TF TFT T AS/PS DISP VM9510 AV AUX IN h h MUTE ENTER PWR MODE 7-INCH DIGITAL TFT AM/FM/DVD/MP3 RECEIVER OPEN 7-INCH 7-INCH TF TFT T BAND AS/PS DISP VM9510 AV AUXIN Pus Pus MUTE ENTER PWR MODE 7-INCH DIGIT L AM/FM/DVD/MP3 RECEIVER OPEN 7-INCH 7-INCH TF BAND AS/PS DISP VM9510 AV AUX IN Push Push MUTE ENTER PWR MODE VM9410 INSTALLATION 5. Replace any items you removed from the dashboard. Pre-installation CAUTIO
Summary of the content on the page No. 5
VM9410 WIRING DIAGRAM CD Changer IP-BUS Cable / BLACK CD Changer GREY compatible with SANYO disc changers CENTER Wireless Headphone BLUE WHITE SUB.W HEADPHONE L RED External Power Amplifier Additional Rear SURROUND Zone Video REAR R RED WHITE Rear Zone HEADPHONE R Video 1 SURROUND REAR L WHITE External AV System RED AUX IN/L FRONT R RED WHITE AUX IN/R FRONT L Parking Brake Switch PINK PRK SW Parking Brake Light Ground Rear View Video Camera YELLOW Antenna Jack YELLOW AUX IN VIDEO Antenna YELL
Summary of the content on the page No. 6
VM9410 CONTROLS AND INDICATORS Button Operation 14 26 23 5 1 1. OPEN Press the OPEN button (1) to activate the automatic mechanical system and move the TFT monitor into viewing position. 7-INCH TFT VM9410 2. WIDE/PICTURE Press the WIDE/PICTURE button (2) to adjust the display aspect of the picture to one of three settings: Wide, Full or Normal. 3. ( ) Press the button (3) to adjust the upward tilt angle of the screen one step at a time. Press and hold this button to continuously adjust t
Summary of the content on the page No. 7
VM9410 CONTROLS AND INDICATORS 10. 3/SCN 1 14 26 23 5 DVD Mode: Press once to start scan playback. TUNER Mode: Press once to play preset radio station channel 3. Press and hold to store the current radio station in preset channel 3. 7-INCH DIGITAL TFT AM/FM/DVD/MP3 RECEIVER OPEN 11. 4/REP 7-INCH 7-INCH T TF FT T BAND AS DISP DVD Mode: Press once to start repeat playback. TUNER Mode: Press once to play preset radio station 21 channel 4. Press and hold to store the current radio station in VM94
Summary of the content on the page No. 8
VM9410 CONTROLS AND INDICATORS LCD Display/Indicators 1. Disc Indicator Illuminated when disc is loaded 2. DVD Playback Indicators (SCN/RPT/RDM/ALL) The following DVD playback indicators become Illuminated when the corresponding function is active: • SCN: scan playback • RPT: repeat playback 1 2 3 4 5 6 • RDM: random playback • ALL: playback all chapters 3. Loudness Indicator (LOUD) The loudness indicator becomes illuminated when the LOUD function is activated. 4. Main Display The main di
Summary of the content on the page No. 9
VM9410 FRONT ZONE REMOTE CONTROL Table 1: Front Zone Remote Control Functions Button Function 8 3 35 4 Name Ref # DVD VCD CDC TUNER CD/MP3 1 5 MENU 1 Enters the main menu Turns on PBC when of the disc playing VCD 2 9 TITLE 2 Enters the title menu of Plays first ten seconds 10 6 the disc of each chapter/title 13 7 MUTE 3 Toggles on/off audio Toggles on/off audio Toggles on/off audio Toggles on/off audio Toggles on/off audio output output output output output 28 26 4 Turns the power on/off Turn
Summary of the content on the page No. 10
VM9410 Table 1: Front Zone Remote Control Functions Button Function Name Ref # DVD VCD CDC TUNER CD/MP3 22 Slow playback/slow Slow playback/slow rewind playback rewind playback ZOOM 23 Zooms in/out on an Zooms in/out on an image image PIC 24 Displays set-up param- Displays set-up param- eters eters OPEN/ 25 Opens/Closes the TFT Opens/Closes the TFT Opens/Closes the TFT Opens/Closes the TFT Opens/Closes the TFT CLOSE monitor monitor monitor monitor monitor 26 Decreases monitor tilt Decreases m
Summary of the content on the page No. 11
VM9410 REAR ZONE REMOTE CONTROL Table 2: Rear Zone Remote Control Functions Button Function Name Ref # DVD VCD 8 3 MENU 1 Enters the main menu of the disc Turns on PBC when playing VCD TITLE 2 Enters the title menu of the disc Plays first ten seconds of each chapter/title 1 5 MUTE 3 Toggles on/off audio output Toggles on/off audio output 2 9 AUDIO 5 Switches the audio language for disc playback REPT 7 Setup to repeat playback of each chapter/title/disc Setup to repeat playback of each chapter/ti
Summary of the content on the page No. 12
VM9410 USING THE TFT MONITOR hold the WIDE/PICTURE button (2) on the monitor Open/Close TFT Monitor FULL panel. The entire screen is extended Open TFT Monitor 2. Select Item to Set: horizontally to the aspect ratio of 16 to Press the OPEN button (1) on the front panel or press the Press the ( ) ( ) buttons (14, 22) on the remote or 9. The extension ratio is the same at ( ) button (25) of the front zone remote control to activate press and hold the ( ) or ( ) buttons (18, 19) on the any p
Summary of the content on the page No. 13
VM9410 OPERATING INSTRUCTIONS Exiting the Audio Control Menu Power On / Off Audio Control Menu Press and hold the VOL/LOC/DX knob (6) or stop making The Audio Control feature allows you to easily adjust your Press the /MUTE button (1) to turn the unit on. The buttons adjustments for a few seconds to exit the audio control menu. audio system to meet the acoustical characteristics of your on the front of the unit light up and “WELCOME” appears vehicle, which vary depending on the type of vehi
Summary of the content on the page No. 14
VM9410 SYSTEM SETUP MENU In “System Setup” mode, “ASP CONFIG” and “GENERAL Adjusting a Feature Adjusting the Clock SETUP” are available for adjustment. Setup can be 1. Enter the option field for the feature you want to adjust Method 1 – TFT screen open: performed by pressing the dedicated button on the remote by pressing the button (18) on the remote or by 1. Access the “Clock” setting under the General Setup control or on the front panel. For system settings, press the pressing the ENTER (
Summary of the content on the page No. 15
VM9410 Table 8: ASP Config Menu Features Setting Options Function ASPConfig Sub.W Filter 80Hz Selecting a crossover frequency sets a cut-off frequency of the subwoofer's 120Hz LPF (low-pass filter) and the “SMALL” speakers' HPF (high-pass 160Hz filter). The Crossover frequency set- ting has no effect if the subwoofer is set to “OFF” and any other speaker is set to “LARGE”. Sub.W Phase 0D Subwoofer output IN phase 180D Subwoofer output OUT OF phase NOTE: Depending on your installa- tion, re
Summary of the content on the page No. 16
VM9410 TUNER OPERATION Tuner TFT Display Switch to Radio Tuner source Auto Store (AS) Press the SRC button (15) on the front panel or remote Automatic Storing of Preset Stations control (8) to switch to the RADIO TUNER source. The Tuner 4 1 11 2 5 6 To select six strong stations and store them in the current TFT or LCD display appears. band: 1. Select a band (if needed). Select FM/AM Band P1 2. Press AS (26) for > 2 seconds to activate the Auto Store Press the BAND button (14) on the front pa
Summary of the content on the page No. 17
VM9410 DVD PLAYER OPERATION NOTE: When properly installed, DVD video cannot be mode. You may eject a disc with the power off and the unit control to activate random playback and play all chapters/ displayed on the main TFT screen unless the parking break is remains off after the disc is ejected. tracks in random order. “Shuffle On” appears on the screen. applied. If you attempt to play a DVD while the vehicle is Press the button (19) on the remote control or the Reset the Loading Mechanism
Summary of the content on the page No. 18
VM9410 playback. Depending upon the channel selected and your • For VCD mode, press the GOTO button to choose control to choose the language in which you would like the speaker setup, the audio output varies according to the between Track Search, Disc Search and Exit. subtitles to appear. following table. VCD Track Search NOTE: During VCD playback, press the AUDIO button (5) Table 9: Speaker Output Options on the remote control to choose between Left Channel, Time – Go to specific Right Chan
Summary of the content on the page No. 19
VM9410 • Rear: AUX IN – “AUX IN” is the current playing source General Disc Information for the rear zone. Table 10: Disc Properties “Surround” is the current playback audio encoding system. Symbol 12cm Disc Properties Max Play Time “DSP” indicates Digital Signal Processing. VCD Playback Information (MPEG 2 Method) Single side single layer (DVD-5) 133 minutes The following information is displayed at the top of the screen Single side double layer (DVD-9) 242 minutes during VCD playback: Doubl
Summary of the content on the page No. 20
VM9410 DVD SETUP MENU In “DVD Setup” mode, “LANGUAGE”, “VIDEO”, “AUDIO”, 3. Confirm your selection by pressing the , , or “SURR SETUP”, and “RATING” (parental lock) are available buttons (14, 17, 19) on the remote control, or the or NOTE: For standard discs not formatted for “widescreen”, use of the 16:9 aspect ratio will result in for setup. This operation can be performed using the remote button (16, 17) on the joystick. The new value is image distortion. control or joystick controls. h
