Hotpoint HE63 HE73 HE93 user manual

Summary of the content on the page No. 1


HE6 3
HE7 3
HE93
Instruction on mounting and use

Summary of the content on the page No. 2

! It is important to conserve this booklet for consultation at any moment. In the case of sale, cession or move, make sure it is together with the product. ! Read the instructions carefully: there is important information about installation, use and safety. ! Do not carry out electrical or mechanical variations on the product or on the discharge conduits. Installation Electric connection ! The power tension must correspond with the tensi

Summary of the content on the page No. 3

 The minimum distance between the supporting surface  for the cooking vessels on the hob and the lowest part
 of the range hood must be not less than 50cm from
     electric cookers and 70cm from gas or mixed cookers.  If the instructions for installation for the gas hob specify
 a greater distance, this must be adhered to. Fix the bracket behind the hood near the joining ring (Fig. 4.1a). Note: The bracket can be adjusted horizontally

Summary of the content on the page No. 4

Control panel Press to enable all the functions (ON/OFF key). Press to turn the lights on and off. To increase or diminish the suction speed, press keys 1,2 or 3. Press O to interrupt the suction function. 4

Summary of the content on the page No. 5

! We advise switching the hood on, at minimum power, before beginning to cook to favour the optimal expulsion of odours. In addition we advise turning it off every time 10/15 minutes after finishing cooking. ! We advise frying under the hood only under constant supervision. ! It is forbidden to cook flambé under the hood because there is the risk of causing a fire. The best performance of the apparatus is obtained with external expulsion: we advise using the hood in this

Summary of the content on the page No. 6

! It is always necessary to isolate the hood from the Mounting and changing the filter power supply during cleaning and maintenance. Therefore remove the plug. The carbon filter must be changed every 6 months. We recommend carrying our maintenance regularly (about every 10 days) to ensure efficacious and 1-Remove the fats filter (a.b) constant performance of the hood. 2-Mount the filters as illustrated in the figures below. 3-To dismantle, proceed inversely. Cleaning the

Summary of the content on the page No. 7

• Disused domestic appliances can be delivered to the public collecting service, taken to suitable local General safety authority areas or, if envisaged by national laws on the matter, resold to dealers at the same time as ! The hood has been designed and constructed in purchasing new, equivalent, types of product. conformity with international safety regulations. These • All the main producers of domestic appliances are warnings are provided for safety reasons and must be active

Summary of the content on the page No. 8

LI 2S7A