Follett 110CR400A/W user manual

User manual for the device Follett 110CR400A/W

Device: Follett 110CR400A/W
Category: Water Dispenser
Manufacturer: Follett
Size: 1.69 MB
Added : 9/9/2014
Number of pages: 32
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Follett 110CR400A/W. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Follett 110CR400A/W.

For your convenience

If looking through the Follett 110CR400A/W user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Follett 110CR400A/W on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Follett 110CR400A/W to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Follett 110CR400A/W User manual - Online PDF
Advertisement
« Page 1 of 32 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Follett 110CR400A/W but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Follett 110CR400A/W. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

110 Series
Ice and Water Dispensers
Order parts online
Installation, Operation and Service Manual
www.follettice.com
110CT400A/W
110CR400A/W 110FB400A/W
Following installation, please forward this manual
to the appropriate operations person.
801 Church Lane • Easton, PA 18040, USA
Toll free (800) 523-9361 • (610) 252-7301
Fax (610) 250-0696 • www.follettice.com
208597R06

Summary of the content on the page No. 2

Follett Corporation Equipment Return Policy Follett equipment may be returned for credit under the following conditions: 1. The equipment is new and unused. 2. A return authorization number has been issued by customer service within 30 days after shipment. 3. Follett receives the equipment at the factory in Easton, PA within 30 days after issuance of the return authorization number. 4. The equipment must be returned in Follett packaging. If the packaging has been damaged or discarded, Follett wi

Summary of the content on the page No. 3

Table of contents Before you begin 4 Specifications 5 Field wiring 6 Installation 8 Installing freestanding dispensers 8 Installing wall mount dispensers 10 ™ Installing Satellite-fill icemakers 12 Installing top mount icemakers 12 User information 14 Cleaning and sanitizing procedures 14 Service Information 16 Wiring diagram – lever models 16 Wiring diagram – SensorSAFE models 17 Dispenser troubleshooting 18 Troubleshooting SensorSAFE board and sensors 19 Disassembly and replacement in

Summary of the content on the page No. 4

Welcome to Follett Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and outstanding after-the-sale support. To ensure that this equipment delivers that same degree of service, we ask that you review the installation portion of this manual before beginning to install the unit. Our installation instructions are designed to help you achieve a trouble-free installation. Should you have any questions or require technical help at any time, please

Summary of the content on the page No. 5

Specifications Electrical 1. Models with Satellite-fill icemakers (110CR400A/W) Icemaker Max. fuse Dispenser Max. fuse Basic electrical: 115V/60Hz/1 phase 11.0 amps 20 amps 4.0 amps 20 amps 2. Freestanding models and models with integral icemakers (110FB400A/W, 110CT400A/W) Total system Max. fuse Basic electrical: 115V/60Hz/1 phase 14.0 amps 20 amps 3. Dispensers and Satellite-fill icemakers are supplied with 7-foot power cord with NEMA 5-20 hospital grade plug. Connect to 20

Summary of the content on the page No. 6

Field wiring for countertop and wall mount dispensers with Satellite-fill icemakers All field wiring must be installed in accordance with NEC and local electrical codes. Field wiring ! diagram is intended only to aid electrician or technician in understanding how equipment works. Field wiring for countertop and wall mount dispensers with Satellite-fill icemakers Attention – Should local codes require a hard-wired connection and/or shielded wiring, eliminate the ! cord and plug(s) and follow

Summary of the content on the page No. 7

Field wiring diagrams Freestanding dispensers and countertop dispensers with integral icemakers IMPORTANT Electric Power Source Standard electrical - 115V, 1 Ph, 60 Hz, FIELD WIRING DIAGRAM IS max. fuse size 20 amps INTENDED TO AID ELECTRICIAN OR TECHNICIAN IN UNDERSTANDING HOW EQUIPMENT WORKS. ALL FIELD BW GND WIRING MUST BE INSTALLED IN X ACCORDANCE WITH NEC AND LOCAL GRN ELECTRICAL CODES. DISPENSER JUNCTION BOX FUSED DISCONNECT LEGEND GRN GND X WIRENUT B X EQUIPMENT GROU

Summary of the content on the page No. 8

Installation procedures Before you begin • All dispensers must be installed level in both directions to ensure proper operation • Required ventilation and recommended service clearances: • Countertop models with Satellite-fill icemaker (110CR400A/W) — none. 12" (305mm) at top recommended for service. • Countertop models with integral icemaker (110CT400A/W) — 6" (153mm) at top. 6"(153mm) each side recommended for service. • Freestanding models (110FB400A/W) — 4" (102mm) at rear. 12" (305

Summary of the content on the page No. 9

Fig. 1 – Rear connections, freestanding models access panel (B) 3/4” FPT drain (A) 3/8" FPT water inlet (A) 31.5" (D) 3/8" FPT (800mm) condenser inlet location (water- (C) 3/4" MPT cooled only) icemaker drain water inlet location (water- cooled only) (E) 3/8" FPT condenser drain location (water- cooled only) 31.5" (800mm) (C) 3/4" MPT 10.25" icemaker drain (260mm) location (air- cooled only) 12. Verify that water sensor tabs are immersed in water in reservoir. 13. Remove top front cov

Summary of the content on the page No. 10

Installing countertop dispensers Dispensers with top mount icemakers cannot be mounted on legs. They must be bolted to counter. ! Use gloves when lifting icemaker to protect hands from sheet metal edges. 1. Position dispenser in desired location, mark dispenser Fig. 2 – Counter cut-out, all models outline on counter and remove dispenser. 2. Drill four 3/8" (5mm) holes in counter (Fig. 2) to 24.5" 9" X 14" (227mm x 356mm) anchor dispenser to counter. (622mm) 12.25" (311mm) 23.75" Follett

Summary of the content on the page No. 11

10. Apply a thick bead, approximately. 1/4" (6mm) Fig. 4 – Rear connections, countertop models with diameter, of NSF listed silicone sealant (Dow- integral icemakers Corning RTV-732 or equivalent) 1/4" (6mm) inside marked outline of dispenser. (M) 3/8" FPT icemaker water inlet 11. Carefully position dispenser on counter. (R) 3/8" FPT condenser inlet 12. Remove four screws securing splash panel to front (water-cooled only) of dispenser and gently lay splash panel on counter. (Water line

Summary of the content on the page No. 12

Installing Satellite-fill icemakers Models110CR400A/W See Icemaker Installation Manual (form #208600) for critical installation instructions for remote icemakers. Failure to comply with these instructions will result in poor performance and void ! warranty. 1. Install Satellite-fill icemaker following instructions in icemaker manual. 2. Run uninsulated ice transport tube from dispenser through ice transport tube knock-out, (Fig. 5G) or through counter opening to icemaker. 3. Insulate ic

Summary of the content on the page No. 13

2. Remove dispenser top front cover by removing two screws at bottom corners of cover, lifting cover slightly and pulling forward. 3. Remove icemaker compartment top and side panels. 4. Remove icemaker hold-down bracket from front of icemaker compartment. 5. Lift icemaker onto dispenser top and slide icemaker completely into position, compressor end first. Front of icemaker base must be flush with front of dispenser. 6. Reinstall hold down bracket on front of icemaker with power cord and

Summary of the content on the page No. 14

User information How the dispenser works Follett’s 110 series automatic load ice and water dispensers receive ice from Follett’s 400 lb (181kg)/day icemaker located in the dispenser base, in the cabinet top or in a remote location up to 20 ft (6m) away. Ice produced is stored in the bin section of the dispenser. When dispensing is activated, the wheel motor is energized, causing the wheel to turn. This moves ice to the dispense chute where it drops by gravity into the container held below the

Summary of the content on the page No. 15

Recommended weekly cleaning 1. Wash drain pan and grille with Solution A above. Rinse thoroughly. 2. Slowly pour solution of one cup (8 oz/237ml) household bleach mixed with one gallon (3.8L) hot water into drain pan to help prevent algae growth in drain lines. If dispenser is a SensorSAFE unit: 3. Deactivate dispenser by depressing and releasing clean switch located on left side of unit under top front cover. 4. Clean lens using soft cloth and mild, non-abrasive cleaner. 5. Reactivate

Summary of the content on the page No. 16

Service information Wiring diagrams How unit works — lever models The dispense wheel motor and dispense solenoid are energized through the power and ice dispense switches. The water solenoid valve is energized through the power and water dispense switches. The icemaker receives the bin signal through the power switch, the normally closed bin thermostat and the icemaker switch. When the bin level thermostat is calling for ice, a 115v bin signal is applied to the bin signal terminals on the ice

Summary of the content on the page No. 17

How unit works — SensorSAFE models SensorSAFE models provide “touchless” ice and water dispensing. When a container is placed within the actuation zone below the ice or water chute on SensorSAFE dispenser models, an infra-red signal reflects off the container and is detected by the sensor. The sensor then sends a signal to the control board to activate the appropriate components to dispense ice or water. LEDs on the board indicate when the board is receiving a signal from the sensors. A safe

Summary of the content on the page No. 18

Dispenser troubleshooting Disconnect power to dispenser and icemaker before putting hands or arms in storage area, or attempting any repair or service to equipment. ! Before calling for service: • Check that there is ice in dispenser bin area • Check that all switches and circuit breakers are on • Check that congealed cubes are not causing a jam • Check that all drains are clear Symptom Possible cause Solution 1. Does not dispense a. Faulty dispense gate. a. Replace dispense gate. ice. b. Fau

Summary of the content on the page No. 19

Troubleshooting SensorSAFE board and sensors Board guide LEDs, when illuminated, indicate the following: Terminals: PWR (board power) L1 (incoming power, hot) CLN (cleaning, no dispensing cycle) L2 (neutral terminals) ICE (ice dispensing activated) WTR (power terminal for water solenoid) WTR (water dispensing activated) SOL (power terminal for dispense gate solenoid) not used WM (power terminal for wheel motor) CLN (terminals for clean cycle switch) Problem: Does not dispen

Summary of the content on the page No. 20

Lens/sensor troubleshooting 1. Turn dispenser power switch off. 2. Remove splash panel. 3. Disconnect wires from output terminal(s) (WTR, SOL, WM) on board. 4. Gently remove appropriate sensor/mounting block assembly from panel by moving block sideways until edge of block clears retaining tab of panel. 5. Inspect lens and sensor assembly for foreign material and remove using non-abrasive cleaner. 6. Turn dispenser power on and test sensor by moving hands through activation area (no cl


Alternative user manuals
# User manual Category Download
1 Follett 230V 50Hz User manual Water Dispenser 0
2 Follett 110FB400A/W User manual Water Dispenser 2
3 Follett 110CT400A/W User manual Water Dispenser 2
4 Follett 50 Series User manual Water Dispenser 0
5 Follett 50 User manual Water Dispenser 1
6 Follett 50Hz User manual Water Dispenser 0
7 Follett 25 User manual Water Dispenser 0
8 Follett 50FB400A/W 115V User manual Water Dispenser 0
9 Follett C/E12CI400A User manual Water Dispenser 1
10 Follett C/E25HR400A/W User manual Water Dispenser 0
11 Follett C/E25CR400A/W User manual Water Dispenser 0
12 Follett C/E50CR400A/W User manual Water Dispenser 1
13 Follett C/E25HT400A/W User manual Water Dispenser 0
14 Follett C/E50HR400A/W User manual Water Dispenser 0
15 Follett C/E50HT400A/W User manual Water Dispenser 0
16 Edelbrock 2475 User manual Water Dispenser 0
17 Sony 2 User manual Water Dispenser 3
18 ADTX User manual Water Dispenser 4
19 Agilent Technologies E4408B User manual Water Dispenser 16
20 AEG PWE9039M User manual Water Dispenser 15