Bunn 10010 user manual

User manual for the device Bunn 10010

Device: Bunn 10010
Category: Water Dispenser
Manufacturer: Bunn
Size: 0.98 MB
Added : 8/10/2014
Number of pages: 14
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Bunn 10010. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Bunn 10010.

For your convenience

If looking through the Bunn 10010 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Bunn 10010 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Bunn 10010 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Bunn 10010 User manual - Online PDF
Advertisement
« Page 1 of 14 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Bunn 10010 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Bunn 10010. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Hot Water
Dispensers
Supercedes
10052.0000; 10010.0000; 10267.0000
10420.0000; 10889.0000; 39338.0000
39338.0001; 44306.0000
INSTALLATION & OPERATING GUIDE
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
To ensure you have the latest revision of the manual or to obtain the illustrated parts catalog, please visit
the Bunn-O-Matic website, at www.bunn.com. This is absolutely FREE, and the quickest way to obtain
the lates

Summary of the content on the page No. 2

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal servers and Thermofresh servers (mechanical and digital)- 1 year parts and 1 year labor. 2) All other equipment - 2 years parts and 1 year labor plus added warranties as specified below: a) Electronic circuit and/or control boards - parts and labor for 3 years. b) C

Summary of the content on the page No. 3

CONTENTS WARRANTY ........................................................................................................... 2 INTRODUCTION ..................................................................................................... 3 USER NOTICES ...................................................................................................... 4 ELECTRICAL REQUIREMENTS ............................................................................... 5 PLUMBING REQUIREMENTS .........

Summary of the content on the page No. 4

USER NOTICES The notices on this dispenser should be kept in good condition. Replace unreadable or damaged labels. NOTICE ALL COMPONENTS ARE 200 TO 240 VOLT A.C. Replace only with components listed in the accompaning literature 00824.0002 00824.0001 rated for the same voltage 12537.0000 00833.0000 As directed in the International Plumbing Code of the International Code Council and the Food Code Manual of the Food and Drug Administration (FDA), this equipment must be installed with adequate

Summary of the content on the page No. 5

ELECTRICAL REQUIREMENTS WARNING - The dispenser must be disconnected from the power source until specified in Initial Set-Up. Refer to Data Plate on the Brewer, and local/national electrical codes to determine circuit requirements. WHITE NEUTRAL WHITE POWER CORD L2 RED NEUTRAL BLUE POWER CORD L2 RED L2 RED POWER CORD N N L2 NEUTRAL L1 BLACK L1 BLACK L1 BLACK L1 L1 L1 L1 BLACK L1 BROWN L1 BLACK GREEN/YELLOW GREEN GREEN G G G 120 volt ac models 230 volt ac models 208 & 240 volt ac models Note: T

Summary of the content on the page No. 6

PLUMBING REQUIREMENTS - ALL EXCEPT OHW This dispenser must be connected to a COLD WATER system with operating pressure between 20 and 90 psi (138 and 620 kPa)from a ½˝ or larger supply line. A shut-off valve should be installed in the line before the dis- penser. Install a regulator in the line when pressure is greater than 90 psi (620 kPa) to reduce it to 50 psi (345 kPa). The water inlet fitting is ¼˝ flare. 3 NOTE - Bunn-O-Matic recommends ¼˝ tubing for installations of less than 25 feet a

Summary of the content on the page No. 7

INITIAL SET-UP - H5M CAUTION - The dispenser must be disconnected from the power source throughout the initial set-up, except when specified in the instructions. 1. Remove the upper rear panel and rotate the control thermostat knob fully coun- terclockwise to the “OFF” position and replace the panel. 2. Connect the dispenser to the power source and turn-on the water supply. 3. Water will automatically flow into the tank to the proper level and shut-off. This will take approximately 10 minutes.

Summary of the content on the page No. 8

OPERATING CONTROLS - PORTION CONTROL ONLY d. (a) VOLUME SELECTOR BUTTONS Press and release the button corre- c. sponding to the Small, Medium, or Large volume, to select the desired amount of water to be dispensed. Pressing a different button after a cycle has been initiated does not change the volume in progress. (b) AUTO STOP/MANUAL DISPENSE BUTTON Press and release button to stop a dispense cycle. Press and hold button to dispense manually. (c) HIDDEN PROGRAMMING BUTTON a. (d) LED I

Summary of the content on the page No. 9

PROGRAMMING - H5-E, H5-PC, H5X, H10X When power is applied to the dispenser, the display located on the bottom of the main circuit board will show the software version for 5 seconds, and then it will show the model number (see chart below) it will then go to (-). While the tank is filling, the display will read (FIL). When the tank is full the display will show the model number and then go to (-). MODEL DISPLAYS (P1) (H5H) 5 Gallon High Voltage Unit (200-240V) (H5L) 5 Gallon Low Voltage Unit

Summary of the content on the page No. 10

PROGRAMMING - H5-E, H5-PC, H5X, H10X Continued LEVEL 2 PROGRAMMING H1 - DISPENSE TEMPERATURE LOCKOUT - PORTION CONTROL ONLY (WILL NOT DISPLAY ON OTHER MODELS) 1. To enter Level 2 Programming, press and hold the center button until H1 ap- pears on the display (approximately 6 seconds) then release button. The display will either read noL (LOCKOUT DISABLED) or Loc (LOCKOUT ENABLED). When (ENABLED), unit will not dispense if the Tank Temperature is below the (READY) temperature setting. 2. Use t

Summary of the content on the page No. 11

PROGRAMMING - H5-ELEMENT Adjusting temperature: Manual Energy Saver Mode: The switch must be in the “SET” position in order to The energy save mode will allow the tank temperature access the program modes. to drop down to 140°F (60°C). 1. Press and hold “TEMP” button until display 1. Simultaneously press and release the (+) and (-) flashes. to “manually” activate energy save mode. 2. While display is flashing, press and release the 2. The display will alternately flash between 140 (+) to incr

Summary of the content on the page No. 12

PROGRAMMING - H5-ELEMENT Continued 2. The display will now show the model number. (H5H) 5 Gallon High Voltage Unit (200-240V) (H5L) 5 Gallon Low Voltage Unit (100-120V) Now scroll with the (+/-) buttons through the models listed above until the display matches the model you are working with. 3. Press and release the upper hidden button once more. The display will show P2. Display will now show the “SET” temperature (ex: 200). Press the (+) button to increase the temperature set point, or t

Summary of the content on the page No. 13

PROGRAMMING - H5-ELEMENT Continued LEVEL 2 PROGRAMMING H2 - F° OR C° SELECTION 1. To enter Level 2 Programming, press and hold the upper hidden button until H2 appears on the display. Release the upper hidden button. The display will show either FAH (Degrees in Fahrenheit) or CEn (Degrees in Centigrade). 2. Press and release the (+) or (-) buttons to alternate between FAH and CEn. 3. After setting FAH or CEn, to exit Level 2 Programming, press and release the up- per hidden button twice. Displ

Summary of the content on the page No. 14

DRAINING THE DISPENSER - OHW CAUTION - The dispenser must be disconnected from the power source throughout these steps. 1. Disconnect the dispenser from the power source and allow dispenser to cool. 2. Tilt dispenser forward over sink. 3. Open faucet. 4. Continue tilting dispenser forward over sink until water stops flowing. NOTE - The dispenser must be full using the INITIAL SET-UP steps before reconnecting to the power source. DRAINING THE DISPENSER - ALL 2, 5 & 10 GALLON MODELS CAUTION - The


Alternative user manuals
# User manual Category Download
1 Bunn AFPO-3 SL User manual Water Dispenser 0
2 Bunn AFPO-3 User manual Water Dispenser 2
3 Bunn 39338.0001 User manual Water Dispenser 2
4 Bunn 10267 User manual Water Dispenser 0
5 Bunn AFPO-3 User manual Water Dispenser 0
6 Bunn FPGA-2 DBC User manual Water Dispenser 0
7 Bunn AFPO-2 SL User manual Water Dispenser 0
8 Bunn 39338 User manual Water Dispenser 0
9 Bunn EQHP-10 User manual Water Dispenser 0
10 Bunn dispenser User manual Water Dispenser 0
11 Bunn TITAN SINGLE 2 User manual Water Dispenser 0
12 Bunn HW2A User manual Water Dispenser 6
13 Bunn HW2 User manual Water Dispenser 15
14 Bunn EASY CLEAR H5X User manual Water Dispenser 1
15 Bunn WATER QUALITY SYSTEM EQHP-25L User manual Water Dispenser 9
16 Edelbrock 2475 User manual Water Dispenser 0
17 Sony 2 User manual Water Dispenser 3
18 ADTX User manual Water Dispenser 4
19 Agilent Technologies E4408B User manual Water Dispenser 16
20 AEG PWE9039M User manual Water Dispenser 15