Summary of the content on the page No. 1
1
2
Hurricane Owner's Manual
Summary of the content on the page No. 2
Standard Features Standard Features þ þ Life time Life time War War ranty ranty — — Avital guarantees the operation of the control unit Avital guarantees the operation of the control unit and remote controls for as long as you own your car (see the enclose and remote controls for as long as you own your car (see the enclosed d warranty card for details). warranty card for details). Two Avi Two Avi Glo™ Glo™ 3- 3- Button/6- Channel Button/6- Channel Re Re mote mote Con Con trols trols — —Thes
Summary of the content on the page No. 3
Remote- Controlled Si lent Arm/Dis arm — At any time, you can press þ a button on your remote control to silently arm or disarm your system. þ User- Programmable Long- Term Si lent Arm/Dis arm — This feature allows you to completely disable the arm/disarm siren chirps until you decide to restore them. þ Pro tected Valet Mode — Disables all alarm functions while your vehicle is serviced by mechanics, car wash personnel or driven by valet attendants. Key less En try in Valet — Allows you to contr
Summary of the content on the page No. 4
Spe cific Zone In tru sion Iden ti fi ca tion — The LED identifies which þ zone was triggered in your absence . þ Auto matic Mal func tion Over ride — Automatically bypasses a malfunctioning trigger or sensor, but monitors all other points to continue protecting your vehicle. þ Multi- Zone Pro tec tion — Offers full entry-point security with separate trigger connections for the doors, hood and trunk (may require optional switches). One- Step Re mote Con trol Code Learn ing — You can easily add u
Summary of the content on the page No. 5
Operating Instructions n Remote Control —Each of the pair of remote controls is a miniature radio transmitter powered by a +12 volt battery with a typical range of up to 100 feet. Obstructions, radio interference, cellular transmissions or a weak remote control battery may reduce the range or interrupt transmission. (If the system does not immediately respond, release and press the button again. This works better than holding the button down.) The second remote can be used by a second driver, o
Summary of the content on the page No. 6
n Si lent Arm In di ca tions. The parking lights will flash twice, the doors will lock, the starter will be disabled and the LED will flash slowly. n Si lent Dis arm In di ca tions. The parking lights will flash once, the doors will unlock, the starter will be enabled and the LED will turn off. n Interior Light Illumination —When the alarm system is remotely disarmed, the vehicle's interior light(s) will turn on for 30 seconds or until the ignition key is turned on. n To Activate Optional
Summary of the content on the page No. 7
n To turn off Pro tected Valet Mode 1. Turn your ignition key to the "ON" position or start the vehicle. 2. Flick the valet switch to the "OFF" po si tion. 3. The LED will turn off to indicate the system is no longer in Protected Valet Mode. 4. Turn your ignition key to the "OFF" position. n Keyless Entry in Valet —While the system is in Protected Valet Mode, you can still use your remote control to lock and unlock the doors as well as activate any optional accessories such as trunk release or a
Summary of the content on the page No. 8
n LED System Status Indicator —The LED on your vehicle’s dashboard or center console will inform you of the system status. LED Status Off System is disarmed On solid In Protected Valet Mode Slow flash System is armed Flashing in cycles See "Specific Intrusion Identification" (page 7) Rapid flash Passive Arming n Previous Intrusion Alert —If the vehicle had been tampered with and the system has been triggered, the siren will chirp 3 times upon remote disarm instead of the usual 1 chirp. n Specifi
Summary of the content on the page No. 9
n How to Interpret the Chirps and Parking Light Flashes ─ When you press the remote control buttons, the system will respond with chirps (unless you have the chirp muting feature turned on or the system is in Valet Mode) and flashes of the parking lights to indicate the system status. An explanation of these chirp/flash acknowledgments follows: Number of chirps and flashes Explanation 1 Disarming of the system 2 Arming of the system 2 and then 4 Armed and there is a sensor malfunction (automatic
Summary of the content on the page No. 10
Programming Alarm System Features Programming Alarm System Features All programmable alarm features are accomplished by turning the ignitio All programmable alarm features are accomplished by turning the ignition n key on (or starting the vehicle) and flicking the valet switch on and off a key on (or starting the vehicle) and flicking the valet switch on and off a preset number of times preset number of times.. 1. 1. Remove the alarm from Protected Remove the alarm from Protected V Valet Mode.
Summary of the content on the page No. 11
Programming Your Remote Control s The system allows the user to add new remote controls in one step, delete lost or stolen remote controls or rearrange the factory preset remote control configuration. All remote control programming features are accomplished by turning the ignition key on (or starting the vehicle) and flicking the valet switch on and off a preset number of times. 1. Remove the system from Protected Valet Mode. Programming cannot be accessed while the system is in Protected Valet
Summary of the content on the page No. 12
Pro gram ming Ta ble for Re mote Controls con tin ued Fac tory # of Fea ture Sec on dary Ac tion Set ting Chirps One-Step Code Press button #1. The siren will chirp 4 times. Remote — 16 Learning control will operate at factory preset order. Instant Code Wait 3 seconds. The siren will chirp twice. All remote ─ 17 Deletio n controls are erased from memory. 12
Summary of the content on the page No. 13
Copyright 1998 Avital Technologies, Inc. * 31-1251/98 13 2 Hurricane Owner's Manual
