Summary of the content on the page No. 1
R
Vehicle Security
OWNER’S
MANUAL
Model: PLUS-5500
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference; and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this
equipment. Such modifications could void the user’s a
Summary of the content on the page No. 2
Congratulations on your purchase of a quality Carbine Automotive security system. Carbine automotive security products have been designed to provide the consumer with a product that is technologically superior and will provide years of trouble free operation. The information enclosed will provide a ready reference of the operation and maintenance of your new Carbine security system. Remote Control Transmitters Your Carbine security system can operate from any one of the three transmitters shown
Summary of the content on the page No. 3
Automatic Arming (Without Using the Transmitter) (Continued) A. The horn/siren will chirp one time. B. The LED indicator will begin to flash slower. C. The parking lights will flash one time. D. All protected entrances are armed. Note 1: Re-opening a protected entrance before the system becomes armed will stop the arming timer . After closing the entrance the timer will begin counting again from zero. Note 2: If the vehicle has a delayed interior lighting system, the automatic arming timer will
Summary of the content on the page No. 4
Removable Valet/Override Switch Operation (Continued) Override Operation: (Security System is Armed) 1. Enter the vehicle (The security system will begin sounding at this point) and place the override switch into the switch housing. Make sure that the switch button is in the “off” position 2. Place the ignition key into the ignition switch and turn the ignition switch to the “on” position. 3. Within 5 seconds of turning the ignition key “on”, place the valet switch to the “on” position. 4. The h
Summary of the content on the page No. 5
User Discretion Silent Arming : Your Carbine security system can be instructed to become armed or disarmed without the horn/siren chirps by the remote transmitter. To operate this feature at any time, simply press the LOCK and UNLOCK buttons at the same time to arm or disarm your security system without the chirp indications. 60 Second Re-Arming: If your Carbine security system has become triggered, the horn/siren will sound for 60 seconds and then stop and re-set to a fully armed condition. N
Summary of the content on the page No. 6
Upgrade Options: Option #1: Remote Power Door Lock/Unlock Control Note: Your vehicle must have an electronic door locking system for this feature to operate. Installing option #1 will allow the remote transmitter supplied with your Carbine security system to lock and unlock your vehicle’s doors as it arms and disarms your security system. Option #2: Remote Trunk/Hatch Release (CH #2) Installing option #2 will allow the remote transmitter supplied with your security system to open your vehicl
Summary of the content on the page No. 7
Programmable Features: The following is a brief description of the operation of each programmable feature. Any adjustment to the operation of these features must be performed by the dealer who installed your Carbine Security System. These features are not user adjustable. Ignition Key Controlled Door Lock/ Unlock: (Remote door lock/unlock option must be installed) With this feature activated, the door lock system of the vehicle will become locked 3 seconds after the ignition key is turned to th
Summary of the content on the page No. 8
System Maintenance: The only maintenance that your Carbine security system requires is a periodic check of it’s operation to be sure that all functions are operating properly. The batteries supplied with your transmitter will usually last about 1 year. Heavier usage will shorten battery life. Reduced transmitter range is usually a sign that the battery in the transmitter is becoming weak and should be replaced. Note: The battery supplied with transmitter (A) will last about 1 year. The battery
