Clearblue user manual

Summary of the content on the page No. 1

CLEAR BLUE HAWAII
Molokai Kayak Instructions
Thank you for purchasing your Clear Blue Hawaii kayak
This easy to use quick reference instruction book is designed to guide you through the assembly process of
your Molokai Kayak even if you are new to kayaking. Although Molokai Kayak is very simple to build, it is
normal for assembly to take slightly longer the first time as you familiarize yourself with the parts, please allow
for this on your first journey. When accustomed to construction, subs

Summary of the content on the page No. 2

CLEAR BLUE HAWAII Molokai Kayak Instructions [ Assembly ] It is best to find an open, clean area in which to assemble the Molokai Kayak 1. Place the gray base skin flat on the floor and assemble the base rod (x1) and side rods (x2). The rods are connected on the inside by elastic cords 2. Locate the side rod flaps and insert one rod into each side, as far as they will go. The side rods are the two longest pieces with no black plastic clips. Both rods are identical therefore it does not matt

Summary of the content on the page No. 3

CLEAR BLUE HAWAII Molokai Kayak Instructions [ Assembly ] Insert cross ribs (D) (D) (C) (C) (B2) (A) (B1) * Assembly Tip : - There are plastic clips along the length of the base rod, make certain that these clips all face upwards before connecting any cross ribs. - The securing rubber bands should be equally spaced, with one at the open end of each base rod clip. - The cross ribs connect at three points: (1) To the side rods at either side through openings in the fabric (2) To the base rod

Summary of the content on the page No. 4

CLEAR BLUE HAWAII Molokai Kayak Instructions [ Assembly ] Insert cross ribs 1. Install cross rib (A) first Cross rib (A) is the largest piece and is installed at the center of the base rod. When clipped together, secure the side rib to the base rod by wrapping the black rubber band around the top of the clip (see previous image) *Assembly Tip Cross rib (A) and (B2) are very similar, please ensure you have the right part, cross rib (A) is wider when put against (B2). 2. Lock the cross rib on

Summary of the content on the page No. 5

CLEAR BLUE HAWAII Molokai Kayak Instructions [ Disassembly ] Taking Molokai Kayak apart is basically a reverse order of the assembly process with a couple of points that should be noted. - When removing the side rods, open the flaps on one end then go to the opposite side and push the side rod along with one hand, whilst keeping the side channels straight with the other hand. If any of the rod sections disconnect it is still possible to remove them as long as the skin is kept straight. - The