Summary of the content on the page No. 1
SL20/CG20 Parts Manual
Phase 7
COIN & NON-COIN (OPL)
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: techsupport@amdry.com
www.amdry.com
ADC Part No. 450222
Summary of the content on the page No. 2
Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be po
Summary of the content on the page No. 3
Table of Contents Phase 7 OPL Top Panel Assembly For Top Control Models ..................................................................................................................... 2 Phase 7 Coin Top Panel Assembly For Top Control Models ..................................................................................................................... 3 Phase 7 Top Panel Assembly For Bottom Control Models ................................................................................
Summary of the content on the page No. 4
2 Phase 7 OPL Top Panel Assembly For Top Control Models Illus. No. Part No. Qty. Description 1 112579 1 Phase 7 Keyboard 2 137250 1 Phase 7 Ribbon Cable 3 137270 1 16” x 1” Large Character Display 4 150005 4 #6-32 x 1/4” Phillips Round Head Machine Screw 5 153010 4 #6 Star Washer 6 883434 1 Phase 7 Board with Sensor Activated Fire Extinguishing (S.A.F.E.) System 7 818173 1 SL-20 Black Control Panel 818196 1 CG-20 Black Control Panel 8 153603 8 Snap Top Standoff 9 -------* 1 Logo ONLY 10 818206 1
Summary of the content on the page No. 5
3 Phase 7 Coin Top Panel Assembly For Top Control Models Illus. No. Part No. Qty. Description 1 137270 1 16” x 1” Large Character Display 2 152015 4 8-32 Hex Nut 3 153010 4 #6 Internal and External Star Washer Zinc 4 150005 4 6-32 x 1/4” Phillips Round Head Machine Screw 5 112579 1 Phase 7 Keypad 6 137250 1 Phase 7 Ribbon Cable 7 887007 1 Phase 7 Coin Board (without S.A.F.E.) 887009 1 Phase 7 Coin Board (with S.A.F.E.) 8 152016 5 4-40 1/4” Hex Nut 9 153045 5 4 Split Lock Washer 10 883783 1 $0.25
Summary of the content on the page No. 6
4 Phase 7 Top Panel Assembly For Bottom Control Models Illus. No. Part No. Qty. Description 1 818431 1 SL-20 Black Control Panel 2 150005 4 #6-32 x 1/4” Phillips Round Head Machine Screw 3 153010 4 #6 Star Washer 4 887009 1 Phase 7 Board with Sensor Activated Fire Extinguishing (S.A.F.E.) System 5 153603 4 Snap Top Standoff 6 818206 1 Magnetic Switch Assembly 7 -------* 1 Logo ONLY * Contact reseller for logo.
Summary of the content on the page No. 7
5 Front Bottom Panel Assembly Illus. No. Part No. Qty. Description 1 818165* 1 Front Bottom Panel Assembly * Specify color when ordering.
Summary of the content on the page No. 8
6 Main Door Assemblies Illus. No. Part No. Qty. Description 1 883824 1 Door Pan with Glass 2 883823 1 Door (left hinge) (includes illus. nos. 2, 13 and 14) 883825 1 Door (right hinge) (includes illus. nos. 2, 13 and 14) 3 102313 1 Door Gasket (fiberglass) 4 151016 4 #8-32 Acorn Nut 5 150322 8 #6 x 1/2” Self-Drilling Screw 6 102314 1 Door Gasket (rubber) 7 153000 4 #8 Flat Washer 8 153012 4 #8 Star Washer 9 150327 2 #6 x 1/2” Phillips Flat Head Screw 10 170230 1 Door Handle 11 103079 2 Door Hinge
Summary of the content on the page No. 9
7 Middle Front Panel Assembly Illus. No. Part No. Qty. Description 1 150322 32 #6 x 1/2” Self-Drilling Screw 2 318146 2 Door Catch Holder 3 818104 1 Middle Front Panel Assembly Complete (specify left or right hinged) (includes illus. nos. 1 through 9) 4 318249 1 Door Catch Cover 5 150531 1 #6 x 1-1/4” Phillips Pan Sheet Metal Screw 6 170228 1 Door Catch 7 150399 4 #8 x 1/2” Phillips Self-Drilling Screw (for models without hinge studs) 8 150301 4 #8 x 7/16” Phillips Pan Head TEK Screw 9 150329 2
Summary of the content on the page No. 10
8 Lint Drawer Assembly Illus. No. Part No. Qty. Description 1 883751 1 Lint Drawer Handle (includes illus. nos. 1 through 5) 2 151010 2 #10-32 Hex Acorn Lock Nut 3 153420 2 #10 Split Lock Washer 4 318541 2 Offset Washer 5 117605 2 Gasket (sold by the foot) 6 883752 1 Lint Drawer Assembly (includes illus. nos. 6 and 7) 7 116054 1 Lint Drawer Felt 818166 1 Lint Draw Complete with Handle (includes illus. nos. 1 through 7)
Summary of the content on the page No. 11
9 Basket (Tumbler) Assembly Illus. No. Part No. Qty. Description 1 884359 1 Open Back Tumbler Assembly 884363 1 Solid Back Tumbler Assembly (as of May 2004) (includes illus. nos. 1 through 8) 2 318242 3 5” Tapered Rib 3 150313 12 #10-16 x 1/2” TORX Screw 4 154217 1 1/8” x 1/2” Pop Rivet 5 102102 1 Rotational Sensor Magnet 401010 1 Adhesive for Felt Collar (5 oz. tube) 6 115906 2 Basket (tumbler) Felt
Summary of the content on the page No. 12
10 Front Basket (Tumbler)/Support Panel Assembly Illus. No. Part No. Qty. Description 1 883820 1 Front Basket (tumbler) Support Panel Complete 2 818110 1 Front Right Wheel Assembly (refer to Basket [Tumbler] Roller Wheel Assemblies on page 12) 3 818109 1 Front Left Wheel Assembly (refer to Basket [Tumbler] Roller Wheel Assemblies on page 12) 4 121400 1 Universal Bushing
Summary of the content on the page No. 13
11 Rear Support Panel Assembly Illus. No. Part No. Qty. Description 1 818207 1 Temperature Sensor Probe Assembly (refer to Temperature Sensor Assemblies on page 14) 2 318252 1 Rear Temperature Probe Mount 3 318234 1 Rotational Sensor Switch Bracket 4 152015 2 #8-32 Hex Nut 5 153000 2 #8 Flat Washer 6 153012 2 #8 Star Washer 7 153009 9 #10 Star Washer 8 152008 9 #10-32 Hex Nut 9 154200 12 5/32” x 5/16” Pop Rivet 10 154007 2 1/4” Push On Fastener 11 318342 1 Rear Basket (tumbler) Support Panel 12
Summary of the content on the page No. 14
12 Basket (Tumbler) Roller Wheel Assemblies Illus. No. Part No. Qty. Description 1 150510 3 1/4-20 x 3/4” Hex Head Machine Bolt 2 154267 1 M10 x 25mm Shoulder Screw 3 153007 3 1/4” Split Lock Washer 4 153002 1 5/16” Split Lock Washer 5 154013 1 M8 Hex Nut 6 154284 1 Basket (tumbler) Wheel Spacer 7 318232 1 Rear Left/Front Right Roller Wheel Bracket 818110 1 Rear Left/Front Right Wheel Assembly Complete (includes illus. nos. 1 through 10) 318233 1 Rear Right/Front Left Roller Wheel Bracket 818109
Summary of the content on the page No. 15
13 S.A.F.E. System Piping Assembly Illus. No. Part No. Qty. Description 1 143581 1 3 GPM 3/8” N.P.T. Spray Nozzle 2 318167 1 Nozzle Bracket 3 143220 2 3/8” F.P.T. Brass Tee 4 143242 1 3/8” x 2-1/2” Brass Nipple 5 143208 2 3/8” Comp x 3/8” M.P.T. Brass Connector 6 143155 3 3/4” Brass Street Elbow 7 143315 1 3/8” M.P.T. x 1/8” Brass Bushing 8 136987 1 Water Jet Pressure Switch 9 165114 1 Solenoid Valve 10 143251 1 3/8” M.P.T. Brass Plug 11 142888 1 1/2” M.P.T. x 3/8” F.P.T. Hex Bushing 12 143099 1
Summary of the content on the page No. 16
14 Temperature Sensor Assemblies Illus. No. Part No. Qty. Description 1 818207 2 Basket (tumbler) Temperature Sensor Probe (includes illus. nos. 1 through 3) 2 122646 1 2-Pin Plug 3 122706 2 Socket Terminal ONLY 4 883821 1 Sensor Activated Fire Extinguishing (S.A.F.E.) System Temperature Sensor Probe Assembly Complete (includes illus. nos. 4 through 8) 5 122646 1 2-Pin Plug 6 122706 2 Socket Terminal ONLY 7 318525 1 Sensor Activated Fire Extinguishing (S.A.F.E.) System Probe Bracket 8 154007 2 P
Summary of the content on the page No. 17
15 Motor Drive Assembly Illus. No. Part No. Qty. Description 1 154279 4 5/16-18 x 3/4” Carriage Bolt (for motor bases without studs) 2 153002 4 5/16” Split Lock Washer 3 154321 1 5/16” x 3/8” Allen Setscrew 4 152004 4 5/16-18 Hex Nut 5 153001 4 5/16” Flat Washer 6 181120 1 4-Pole Motor (for earlier models without studs) 7 318247 1 4-Pole Motor Sheave (60 Hz models) 318248 1 4-Pole Motor Sheave (50 Hz models) 8 318548 1 Motor Base 9 100197 1 Drive Belt 818121 1 Drive Motor Assembly 60 Hz (include
Summary of the content on the page No. 18
16 Direct Spark Ignition (DSI) Burner Assembly
Summary of the content on the page No. 19
17 Direct Spark Ignition (DSI) Burner Assembly Illus. No. Part No. Qty. Description 1 143226 1 1/2” Brass Street Elbow 2 141317 1 1/2” Bronze Union Elbow 3 882451 1 Ignitor Probe Assembly with High Voltage (HV) Wire (includes illus. nos. 3 and 16) 4 128927 1 1/2” 24 VAC Redundant (natural gas) Gas Valve 880960 1 1/2” 24 VAC Redundant (liquid propane) Gas Valve 5 140868 1 #31 Burner Orifice (natural gas) ONLY (40K BTU Burners) 140870 1 #34 Burner Orifice (natural gas) ONLY (35K BTU Burners) 14086
Summary of the content on the page No. 20
18 Electric Oven Assembly Illus. No. Part No. Qty. Description 1 318543 1 Electric Oven Housing 2 318294 1 Electric Oven Mounting Bracket 3 120086 1 3-Phase (3ø) Oven (5.4 kW at 240 volt or 8.1 kW at 416 volt) 818155 1 Electric Oven Assembly Complete (includes illus. nos. 1 through 9) 4 150300 6 #10-16 x 1/2” Hex Washer TEK Screw 5 130400 1 Temperature Sensor 6 153022 4 #10 Flat Washer 7 153024 9 #10 Split Lock Washer 8 152008 9 #10-32 Hex Nut 9 121011 1 Bus Bar
