Summary of the content on the page No. 1
5 HP
Air Compressor Pump
93786
ASSEMBLY AND OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
®
Copyright © 2006 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For techni
Summary of the content on the page No. 2
Specifications CastAluminum Pump, Single Stage, Construction: Compressor Type: CastIronFlywheel TwinCylinder Mi aximum Pressure:1: 45 ps Mm aximum Speed 1200 rp SplashOiltype withOilLevel 15.1 cfm at40 psi Lubrication: Windowand BallBearing Air DeliveryRate at1050 rpm: 13.5 cfm at90 psi Check Release Valve 12.3 cfm at115 psi 14-½" Dia.x1-15/16"W PulleyDimensions: Pe istonDimensions: 80mm Dia.x60mm strok withdualV-grooves for belts OH verallDimensions:1: 5"Lx11-½"W x17-¼"N. etWeight 58.45 lbs Cau
Summary of the content on the page No. 3
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. 7. Use eye and ear protection. Always wear ANSI approved impact safety goggles. Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts
Summary of the content on the page No. 4
18. Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician. Note: Performance of this Air Compressor Pump may vary depending on variations in local line voltage or motor capacity. Extension cord usage may also affect tool performance. 19. Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not
Summary of the content on the page No. 5
Air Compressor Pump Safety Precautions 1. Use proper size motor and motor pulley. This air compressor Pump must be installed with a 5 HP electric motor and pulley (both not supplied) which can turn the Air Compressor Belt Wheel (36) at approximately 1050 rpm, but not more than 1200 rpm. 2. Install motor, pully belt and pully belt cover securely. Be sure to use the proper size bolts to install your motor (not included). The belt and belt cover (not included) must be strong enough to prevent brea
Summary of the content on the page No. 6
Unpacking When unpacking, check to make sure that the product is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. Installation Note: Depending on your level of expertise, you may wish to have a qualified technician perform this installation. Caution: Avoid damage to the Air Compressor Pump and other equipment. Make sure the mounting surface for the Air Compressor Pump is installed on a flat
Summary of the content on the page No. 7
Note: A qualified electrician must wire in a pressure switch control that turns off the motor when the pump reaches the desired pressure (less than 145 PSI). Note: Always install this Air Compressor Pump to an air tank that has a pressure release valve set at less than 145 PSI. Note: A high/low cut-in/cut-out switch (not included) can be incorporated to operate a motor starter or motor contractor for semi-automatic control of air pressure in the vessel. Warning: Avoid serious injuries. Do not op
Summary of the content on the page No. 8
Parts List Pn art #D. escriptio Q# TYPn artD. escriptio QTY 1eC1 rankcas 2e3T1 e 2tO1 ilDrainBol 2e4I1 ntercooler Air Hos 3tO1 ilWindowGaske 2t5A1 ir Outle 4wO1 ilWindo 2d6C2 ylinder Hea 5wS4 cre 2d 7*G2 asket-Cylinder Hea 6rL4 ock-Washe 2t8P2 istonRing Se 7rR1 ear Cove 2n9P2 isto 8rG1 asket-Rear Cove 3l0S4 nap-ring Interna 9gB1 earin 3n1P2 istonPi 1p 0O1 ilFiller Ca 3l2K1 ey-Beltwhee 1r 1G2 asket-Cylinde 3k3D1 ipstic 1r 2L9 ock-Washe 3t4B1 ol 1t 3B8 ol 3l5W1 asher-Beltwhee 1t 4N8 u 3l6B1 eltwhe
Summary of the content on the page No. 9
Assembly Drawing PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS S
