Summary of the content on the page No. 1
PLEASE READ THE INSTRUCTION CAREFULLY BEFORE OPERATING THIS UNIT.
WARNING
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
IMPORTANT
Since the CD circuitry may cause interference to other radio tuners nearby, switch this unit off
when not in use or move it away from the affected radio tuner.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) t
Summary of the content on the page No. 2
LOCATION OF CONTROLS POWER SOURCES NORMAL BATTERIES / AC ADAPTOR Battery Power Operation 1 6 1. Open the battery compartment cover Average Playing Time 7 2 and insert two "AA" alkaline batter- (Continuous Play) 8 Battery Type Normal Play Anti-Skip ies inside the battery compartment. 3 Mode Play Mode Follow the polarity as indicated in the 9 battery compartment. 4 Alkaline "AA" Approx. 9 hrs. Approx. 8 hrs. 2. Close the battery compartment cover. 5 Ni-CAD Rechargeable (min speci
Summary of the content on the page No. 3
CHARGING AND USE OF RECHARGEABLE BATTERIES LISTENING WITH HEADPHONES Rechargeable Battery Operation Connect the plug of the stereo headphones into This unit can fully recharge specified rechargeable batteries, in approximately 15 the PHONES (GREEN) socket. hours. The rechargeable batteries (NOT supplied) should be recharged before TO PHONES they are used for the first time if they are low in power or they have not been used Caution: Avoid excessive volume levels and for a long period
Summary of the content on the page No. 4
CLEANING DISCS LCD DISPLAY INFORMATION Finger prints should be carefully wiped from the surface of disc with a soft cloth. Unlike WHEN POWER ON conventional records, compact discs have no grooves to collect dust and microscopic debris, If disc is in, starts auto adjustment. During so gently wiping them with a soft cloth should adjustment, display shows - -. remove most particles. Wipe in a straight motion from the center to the edge. If no disc, then disc is displayed. Nev
Summary of the content on the page No. 5
REPEAT/PLAY MODES INTRO PLAY Every time the MODE button is pressed. 1. Press MODE button three times, then INT is The corresponding mode appears in the display window. displayed. 2. Press PLAY / PAUSE button, and starts INTRO play from track no. 01. MODE MODE MODE MODE 3. Select INTRO mode during play, INT starts flash. Press PLAY/PAUSE button, then stops flash and REPEAT REPEAT NORMAL INTRO 1 ALL starts INTRO play from track no. 01. Press >>I or after finish to play the current tr
Summary of the content on the page No. 6
RANDOM PLAY MAINTENANCE Enables all the tracks on a disc to be played in a Random (Shuffle) sequence. Cleaning the Cabinet Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a weak 1. Press MODE button four times, then RND is solution of neutral detergent and water, and then wipe clean. displayed. Cleaning the Lens 2. Press PLAY/PAUSE button, then the track No. is A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not selected at rando
Summary of the content on the page No. 7
USING ANTI-SHOCK AND SKIP FREE PROTECTION FEATURE PRODUCT SPECIFICATIONS PICK UP Note the " " indicator appears on display as being empty when the player first activated. It immediately begins to store sound data in memory bank, the indicator System Compact disc digital audio system appears to be " " when the data buffer is full. Laser diode Material : GaAlAs Properties Wavelength: = 780nm When the laser loses tracking due to mechanical shock, the data stream into the Emission duration
