Summary of the content on the page No. 1
242291901 (December 2012)
All about the
Use & Care
of your Refrigerator
TABLE OF CONTENTS
Important Safety Instructions ......................2 Automatic Ice Maker - Freezer ...................23
Features at a Glance ...................................5 Storage Features ......................................24
Installation ................................................6 Storing Food and Saving Energy ................28
Door Removal Instructions ........................10 Normal Operating Sou
Summary of the content on the page No. 2
IMPORTANT SAFETY INSTRUCTIONS WARNING Installation Checklist Please read all instructions before using this Doors refrigerator. Handles are secure and tight For your Safety Door seals completely to cabinet on all • DO NOT store or use gasoline, or other sides flammable l iquids in the vicini t y of this or Freezer drawer is level across the top any other appliance. Read product labels f or w arnings r egar ding flammabi li t y and Leveling other hazards. Refrigerator is level,
Summary of the content on the page No. 3
IMPORTANT SAFETY INSTRUCTIONS Proper Disposal of your Electrical information Refrigerator or Freezer • The refrigerator must be plugged into its own dedicated 115 Volt, 60 Hz., 15 Amp, Risk of child entrapment AC only electrical outlet. The power cord of Child entrapment and suffocation are not the appliance is equipped wi th a thr ee- problems of the past. Junked or abandoned prong grounding plug for your protection refrigerators or freezers are still dangerous against electrical shock
Summary of the content on the page No. 4
IMPORTANT SAFETY INSTRUCTIONS Grounding type wall receptacle Do not, under any circumstances, cut, remove, or bypass the grounding prong. Power cord with 3-prong grounded plug CAUTION To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change. 4
Summary of the content on the page No. 5
FEATURES AT A GLANCE *Features may vary according to model *LED *Dairy Cluster Lights Compartment *Air Water *Fresh Food Ice Filter Filter Ice Maker Bin Flipper Guide Flipper *Can Rack Mullion ® Spillsafe Flip Shelf Shelves *LED Cluster Light *LED Cluster Slide-Under Light Shelf *LED Cluster Light Crisper Drawer *Store- TM *Door Bin More Drawer Adjustable Hinges Freezer Baskets *Freezer Ice Maker Removable Ice Bin Toe Grille IMPORTANT Features not purchased with your refrigerator
Summary of the content on the page No. 6
INSTALLATION Tools Necessary: (OR) OR OR AND 3/8" Fixed Phillips Head Wrench or #2 Square Socket Adjustable Drive Head Wrench Wrench Set Components Provided: CAUTION Top Hinge Top Hinge Cover Front Cover Rear Screw Screw Do Not install the refrigerator where the temperature will drop below 55° F (13° C) or rise above 110° F (43° C). The compressor will not be able to maintain proper temperatures inside the refrigerator. Top Lower Do Not block the toe grille on the lower front Hinge Hinge
Summary of the content on the page No. 7
INSTALLATION Leveling Freezer Drawer (if necessary) To level the freezer drawer: 1 Check gasket seal around top, bottom, and sides of freezer drawer. 2 If gasket is not sealed, open drawer and slightly loosen four drawer screws (two on each side) to allow drawer to rotate. Remove Hex Remove Hex Head Drawer Head Drawer Screw Screw Do Not Remove Do Not Remove Other Screws Other Screws Remove Hex Remove Hex Head Drawer Head Drawer Screw Screw 3 Close drawer and recheck the seal on the • Doors
Summary of the content on the page No. 8
INSTALLATION 1 Open door to provide access to screw. 4 After unit is leveled, lower anti-tip leg until i t contacts the floor . 2 Loosen screw. 3 Adjust door to desired location. Door Door Rotate Door to Desired Location Raise Anti-tip Leg Adjusting Door Lower 4 Rotate door stop until it makes contact with the lower hinge. 5 Re-tighten screw. 5 I nstal l the toe gril le b y fit ting into place. To adjust the door stop: Door stop is adjustable between 85 to 145 degrees. Rotate Door NO
Summary of the content on the page No. 9
INSTALLATION To level the doors using the adjustable To adjust the flipper mullion: lower hinge (select models): 1 Loosen the scr ew located on the fl ipper 1 Remove all food items from door bins on mullion hinge. door being adjusted. 2 Open doors to 90 degrees. Flipper Mullion 3 Loosen or remove screw. Loosen or Remove Screw Screw Open Flipper Door Mullion 90 Hinge Degrees Adjusting Flipper Mullion Screw Bottom of Door 2 Adjust fl ipper mul lion height. F or pr oper connection wi th
Summary of the content on the page No. 10
DOOR REMOVAL INSTRUCTIONS To remove the refrigerator doors: Getting through narrow spaces 1 Trace lightly around the door’s top hinges If y our r ef riger ator wi l l not fit thr ough an with a pencil. This makes reinstallation easier. entrance area, you can remove the doors. Check first b y measuring the entr ance. To prepare for removing the doors: 1 Make sure the electrical power cord is unplugged from the wall outlet. 2 Open the freezer drawer and remove the toe grille (see “Installa
Summary of the content on the page No. 11
DOOR REMOVAL INSTRUCTIONS Press Press Water Line Approximately 5 Feet NOTE Y ou wil l be pulling appr o ximately fiv e f eet of water tube from the back of the refrigerator. 4 Unscrew the three lower hinge screws and hinge if necessary. To reinstall the right door, reverse the above steps. Lower Hinge Removal Once both doors are in place, ensure they are aligned with each other and level (Please see the “Installation” section for more details), and replace the top hinge cover. NOTE Wh
Summary of the content on the page No. 12
DOOR REMOVAL INSTRUCTIONS Removing Freezer Drawer 1 Open freezer drawer. 2 Remove drawer screws on right and left sides (two screws on each side). Remove Hex Remove Hex Head Drawer Head Drawer Screw Screw Do Not Remove Do Not Remove Other Screws Other Screws Remove Hex Remove Hex Head Drawer Head Drawer Screw Screw NOTE CAUTION Do not remove center screw from freezer Drawer is heavy. Use caution when lifting. drawer. This is a factory adjustment. 3 Lift drawer up and out to remove. 3 Chec
Summary of the content on the page No. 13
INSTALLING DOOR HANDLES Mounting Refrigerator Handles Door Handle Mounting Instructions for Frigidaire 1 Remove handles from carton and any other protective packaging. 2 Position fresh food handle end caps over upper and lower pre-installed shoulder bolts (A) that are fastened into door, ensuring the holes for the set screws are facing towards the opposite door. 3 While holding handle firmly against door, fasten upper and lower Allen set screws (B) with supplied Allen wrench.
Summary of the content on the page No. 14
INSTALLING DOOR HANDLES Mounting Refrigerator Handles Door Handle Mounting Instructions for ® Frigidaire Gallery 1 Remove handles from carton and any other protective packaging. 2 Position fresh food handle end over upper and lower pre-installed shoulder bolts (A) that are fastened into door, ensuring the holes for the set screws are facing towards the opposite door. 3 While holding handle firmly against door, fasten upper and lower Allen set screws (B) with supplied Allen wre
Summary of the content on the page No. 15
INSTALLING DOOR HANDLES Mounting Refrigerator Handles Door Handle Mounting Instructions for ® Frigidaire Professional 1 Remove handles from carton and any other protective packaging. 2 Position fresh food handle end over upper and lower pre-installed shoulder bolts (A) that are fastened into door, ensuring the holes for the set screws are facing towards the opposite door. 3 While holding handle firmly against door, fasten upper and lower Allen set screws (B) with supplied Allen
Summary of the content on the page No. 16
CONNECTING THE WATER SUPPLY • A shutoff valve to connect the water supply line to your household water system. DO WARNING NOT use a self-piercing type shutoff valve. • Do not r e-use compr ession fit ting or use To avoid electric shock, which can cause thread seal tape. death or severe personal injury, disconnect the refrigerator from electrical power before • A compression nut and ferrule (sleeve) for connecting a water supply line to the connecting a copper water supply line to ref
Summary of the content on the page No. 17
CONNECTING THE WATER SUPPLY To Connect Water Supply Line To Plastic Water Tubing Steel to Ice Maker Ice Maker Inlet Valve Clamp Fill Tube 1 Disconnect refrigerator from electric power Brass source. Compression 2 Place end of water supply line into sink or Nut buck et. T urn ON w ater supply and flush Ferrule supply line until water is clear. Turn OFF (Sleeve) water supply at shutoff valve. Water Line 3 Remove plastic cap from water valve inlet and discard cap. Water Valve 4 If you use
Summary of the content on the page No. 18
CONTROLS User Interface (options may vary) Enlarged view of user interface display menu (options may vary) 18
Summary of the content on the page No. 19
CONTROLS Options May Vary air filter Displays the current status of the ai r filter (Good, O r der , or options Used to enter and exit the R epl ace). T o r eset the filter ( ∧ or ∨) options menu and make status to “Good”, press and selections. hold the “set” key for three seconds. exit Toggles the options and run modes. default While in the default option, settings press and hold the set key control While in the locked state, for three seconds to reset all locked you will n
Summary of the content on the page No. 20
CONTROLS Alarms Sabbath Mode Power Failure The Sabbath Mode is a feature that disables portions of the refrigerator and its controls In the event of a power failure, the power fail in accordance with observance of the weekly alert will be illuminated. Press alarm reset to Sabbath and religious holidays within the acknowledge the alarm. Other modes may be Orthodox Jewish community. turned off until the alarm is acknowledged. When the power fail alert is acknowledged, the Sabbath Mode is t
