Summary of the content on the page No. 1
MD6443
User’s Guide
PERSONAL COMPACT DISC PLAYER
WITH 60 SECOND DIGITAL MOTION
PROOF ANTI-SHOCK PROTECTION
Before operating this product,
please read these instructions completely.
Summary of the content on the page No. 2
SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock t
Summary of the content on the page No. 3
SAFETY PRECAUTIONS (CONTINUED) INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer- ence to radio communications. Howeve
Summary of the content on the page No. 4
S E I R T A S S U S D O N I C Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or
Summary of the content on the page No. 5
LOCATION OF CONTROLS 1 9 2 10 11 3 4 12 13 5 14 15 16 17 6 7 8 1. LINE OUT Jack (Rear of Unit) Unit) 2. HOLD (ON/OFF) Switch 11. DBBS (Bass Boost) Switch 3. PROG (Program) Button 12. MODE Button 4. ESP Button 13. Skip/Search n Button 5. Display 14. PLAY/PAUSE (®p)/POWER 6. CD Compartment ON Button 7. Battery Compartment (Under 15. Skip/Search o Button CD Compartment) 16. STOP (n)/POWER OFF 8. DC 4.5V Jack Button z 17. CD Door OPEN Switch 9. PHONES (Headphones) Jack (Rear of Unit) 10. VOLUME Cont
Summary of the content on the page No. 6
+ – – + POWER SOURCES This CD player requires either two (2) “AA” cell batteries (not included) or an AC adapter (not included). BATTERY INSTALLATION The battery indicator ( ) will appear in the CD display when the batteries need replacing. 1. Open the CD compartment, then open the battery compartment door by pressing in on the tab and then lifting it. To prevent the possibility of losing the cover, it cannot be removed. 2. Insert two (2) “AA” cell batteries (not included) according to the pola
Summary of the content on the page No. 7
OPERATION BASS BOOST TURNING POWER ON/OFF 1 1 1 2 To turn the unit on, press the To emphasize the bass, slide the DBBS switch to the ON position. For PLAY/PAUSE (®p)/POWER ON button ∂. normal bass, slide the DBBS switch to 1 To turn the unit off, Press the STOP (n) the OFF position. /POWER OFF button ∑ while in the Stop mode. HOLD 1 Slide to the ON position to disable the buttons; “Hold” will briefly appear in the display. When pressing the buttons on the CD compartment lid, "Hold" will briefly
Summary of the content on the page No. 8
CD OPERATION TO PLAY A CD (Standard, CD-R and CD-RW) 2 1 Open the CD compartment lid by Press the PLAY/PAUSE (®p)/POWER sliding the CD OPEN switch to the ON button to start playback. To pause right. Gently press a disc, label side up, PLAYBACK, press the PLAY/PAUSE 1 onto the spindle until it locks in place. (®p)/POWER ON button again, the Close the CD compartment lid. Insert elapsed time will blink. Press once headphones into the PHONES jack. again to resume playback. 2 3 4 3 4 1 2 When the dis
Summary of the content on the page No. 9
CD OPERATION (CONTINUED) 60 SECOND MOTION PROOF ELECTRONIC ANTI-SHOCK SYSTEM This CD player has a built-in Anti-Shock System that cuts down on CD skipping, which is useful when using the CD player in the car or while jogging/walking. Follow the steps below to activate and understand the Anti-Shock System: 2 1 With a CD inserted, press the Open the CD compartment lid by sliding the CD OPEN switch to the PLAY/PAUSE (®p)/POWER ON right. Gently press a disc, label side button to turn the unit on. 1
Summary of the content on the page No. 10
CD OPERATION (CONTINUED) 5 6 If the CD player is subject to vibration If all the bars disappear and the CD during playback, the bars will player is subject to immediate vibration, disappear one by one. During the the unit may skip. vibration, the music should continue to play the signals stored in the memory until the CD player can read the music data properly from the disc. At this time, the indicator will probably show fewer bars indicating the music signals stored in memory are low. 7 8 If no
Summary of the content on the page No. 11
CD OPERATION (CONTINUED) TO REPEATEDLY PLAY BACK ONE TRACK 1 2 1 2 3 2 3 With a CD inserted, press the The unit will then play the same track PLAY/PAUSE (®p)/POWER ON over and over until the STOP (n)/POWER OFF button ∂ is pressed. button ∂ to turn the unit on, then select Adjust the VOLUME control ∑ and a track using the SKIP/SEARCH o 2 orn3 button. Press the MODE button DBBS switch ∏ as desired. ALL π once; the Repeat 1 indicator 1 will appear in the display. TO REPEATEDLY PLAY BACK ALL TRACKS
Summary of the content on the page No. 12
1 1 CD OPERATION (CONTINUED) INTRO PLAY 1 2 4 1 2 3 With a CD inserted, press the Press the PLAY/PAUSE ( )/POWER PLAY/PAUSE ( )/POWER ON ON button ∂ to begin playback. The unit button ∂ to turn the unit on and press will play the first 10 seconds of each the STOP (n)/POWER OFF button ∑ track. Adjust the VOLUME control ∑ to stop auto playback. Press the MODE and DBBS switch ∏ as desired. Press button ∏ three times; the INTRO the STOP (n)/POWER OFF button π indicator will appear in the display. to
Summary of the content on the page No. 13
1 1 1 CD OPERATION (CONTINUED) TO PROGRAM THE MEMORY (UP TO 24 TRACKS) 2 1 With a CD inserted, press the PLAY/PAUSE (®p)/POWER ON button 1 Select the first track to be played back to turn the unit on and press the STOP using the SKIP/SEARCH o 1 or n ∑ (n)/POWER OFF button 2 to stop auto button, then press the PROG button ∏ playback. Press the PROG button 3; the again. Repeat this step to program Track (00), program number (P-01) and additional tracks up to a maximum of 24 PROG indicator will ap
Summary of the content on the page No. 14
C B L E E N A CARE AND MAINTENANCE Caring for Compact Discs • Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the compact disc. • Do not attach adhesive tape, stickers, etc. to the compact disc label. • Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the compact disc. If necessary, use a CD cleaning kit. • If a compact
Summary of the content on the page No. 15
TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM CAUSE SOLUTION Unit will not Batteries inserted Insert batteries turn on. incorrectly. correctly. Weak or dead Replace batteries. batteries. AC adapter Check AC adapter not connected. connection. Disc will not play. CD compartment Close CD compartment. not closed. Disc inserted Reinsert disc correctly. incorrectly. Dirty or defective Try another disc. disc. Moisture Wipe d
Summary of the content on the page No. 16
SPECIFICATIONS Power requirements......................................2 x LR6 "AA" alkaline battery DC In 4.5V adapter (center positive) D/A conversion...................................1-bit DAC eight times oversampling Frequency response ............................................20~20,000Hz (+1,-3 dB) Anti-shock. .......................................................................60 second buffer Output level...........................................Line output: 0.6 Vms (47K ohms) Headp
Summary of the content on the page No. 17
Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www.memorexelectronics.com
