Vinothèque 6-05-08 user manual

Summary of the content on the page No. 1

Large XLT Duct Kit Installation
by Vinothèque and WhisperKOOL®
“Protecting Your Investment in Fine Wines”

6-05-08

Summary of the content on the page No. 2

Summary of the content on the page No. 3

Duct Kit Parts List Large XLT Duct Kit 90° Register Boot Model DF-0C Duct Fan Boot-Unit Adapter Flange from Wells Technology, Inc Measurement Guidelines Thermostat Controller 0 inches  8” Flex Ducting 40 inches (not included) 

Summary of the content on the page No. 4

Step  First: Remove the five screws which will hold the ducting unit in place One screw is located at the top-center A pair of screws are located at the top-right and the top-left Another pair of screws are located mid- right and mid-left 4

Summary of the content on the page No. 5

Step 2 Second: Move the ducting unit in place Note: Installation procedure for the Small XLT and attach it into the unit. Duct Kit and the Large XLT Duct Kit are the same. The photos below feature the Small XLT Duct Kit. Line up the screw holes on the ducting unit with the screw holes on the WhisperKOOL® XLT Screw the ducting unit onto the Whis- perKOOL® XLT starting with the top center screw... then the top-right and top-left screws... then the bottom right and the bottom left screws 5

Summary of the content on the page No. 6

Step  Third: Plug the unit in The fan will not instantly turn on. Instead, a heat sensor will detect when the unit begins to heat up which will trigger the fan to regu- late temperature. The customer will need to purchase 8” flex ducting, along with any hangers needed to run the ducting outside The warm air can be exhaust to several places such as an attic, an adjacent room, or outside. The goal is to get the warm exhaust air away from the rear intake of the unit. 6

Summary of the content on the page No. 7

Step 4 Using the Thermostat Controller The in-line fan will turn on and push warm exhaust air away from the WhisperKOOL® unit, preventing the unit from overheating. The in-line fan is capable of moving warm air through 25 feet of 8” flex duct- ing (not included). The in-line fan can be set to automatically turn on at varying temperatures in order to conserve the most electricity. Setting the Themostat Controller to its lowest setting will turn the fan on at lower tem- peratures (Around 0°

Summary of the content on the page No. 8

WhisperKOOL®