Summary of the content on the page No. 1
CD-ROM
SCSI-2 Command Set
Reference Manual
Version 3.1
(OB-U0077C)
June 26, 1997
Pioneer Electronic Corporation
Pioneer New Media Technologies, Inc.
Summary of the content on the page No. 2
CD-ROM SCSI-2 Command Set Reference Manual Version 3.1 (OB-U0077C)
Summary of the content on the page No. 3
This manual is copyrighted with all rights reserved. No part of this document may be reprinted, reproduced, translated or utilized in any form or by any means now known or hereafter invented including, but not limited to, any electronic, mechanical, photocopying and recording or information storage and retrieval system means, without the express written permission from Pioneer Electronic Corporation or its affiliates. Every effort has been made to ensure that the information in this manual is ac
Summary of the content on the page No. 4
FCC INFORMATION The equipment described in this manual has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in Part 15 of FCC rules. These specifications are designed to provide reasonable protection against radio and television reception interference in a residential installation. There is no guarantee that interference will not occur in a particular installation. To determine if your CD-ROM drive is causing interference, turn th
Summary of the content on the page No. 5
Table of Contents LIST OF TABLES .............................................................................................................................. iv REVISION HISTORY......................................................................................................................viii 1. PREFACE.................................................................................................................................... 1 1.1 DRM/DR-U Series..................................
Summary of the content on the page No. 6
2.14 Play Audio Track Index (48h)................................................................................................... 73 2.15 Play Audio Track Relative(10) (49h) ........................................................................................ 75 2.16 Play Audio Track Relative(12) (A9h) ....................................................................................... 77 2.17 Prevent/Allow Media Removal (1Eh) ............................................................
Summary of the content on the page No. 7
APPENDIX C DRIVE VERSION DIFFERENCES ............................................................................I APPENDIX D PRODUCTS DEFAULT DATA...................................................................................I D.1 Product data of Applied Model Number 3 (Inquiry Data) .............................................................I D.2 CD-ROM ABILITY MECHANICAL STATUS PAGE DEFAULT DATA............................... III APPENDIX E CD-ROM COMMAND LIST (BY CODE).................
Summary of the content on the page No. 8
LIST OF TABLES TABLE 1-0 MODELS OF DRM/DR-U SERIES SUPPORTING SCS-2 COMMAND SET .................................................... 2 TABLE 1-2 DRIVE VERSIONS SUPPORTED BY THIS MANUAL .................................................................................... 2 TABLE 1-5 SAMPLE COMMAND................................................................................................................................... 6 TABLE 2-0 SCSI-2 COMMAND LIST (BY NAME) ..............................
Summary of the content on the page No. 9
TABLE 2-9-5A INACTIVITY TIMER MULTIPLIER VALUE............................................................................................... 50 TABLE 2-9-6 PAGE CODE 0EH - CD-ROM AUDIO CONTROL PARAMETERS STATUS FORMAT.................................. 52 TABLE 2-9-6A OUT PORT CHANNEL SELECT PARAMETERS.......................................................................................... 52 TABLE 2-9-7 PAGE CODE 2AH - CD-ROM CAPABILITIES AND MECHANICAL STATUS PAGE FORMAT.................... 5
Summary of the content on the page No. 10
TABLE 2-27B SUB-CHANNEL Q MODE INFORMATION............................................................................................... 106 TABLE 2-27C AUDIO STATUS ................................................................................................................................ 106 TABLE 2-27D ADR SUB-CHANNEL Q FIELD........................................................................................................... 108 TABLE 2-27E SUB-CHANNEL Q CONTROL FIELD .............
Summary of the content on the page No. 11
TABLE 2-49 READ ALL SUBCODE (DFH)................................................................................................................ 164 TABLE D-1A DR-U124X INQUIRY DATA FORMAT..........................................................................................................I TABLE D-1B DR-UA124X INQUIRY DATA FORMAT.......................................................................................................I TABLE D-1C DRM-624X INQUIRY DATA FORMAT...................
Summary of the content on the page No. 12
REVISION HISTORY Version Date Section/Page Description 1.0 09.07.93 N/A Initial release 2.0 07.20.94 Title Addition of DRM-602X Vendor Unique Sections 1.1 - 1.2 Commands Section 1.4 Sections 2.46 - 2.49 3.0 02.08.95 Sections 1.1 - 1.2 Addition of models DR-124X and DRM-624X Section 1.4 Addition of Appendix D Section 2.1 Section 2.9.7 Sections 2.22 - 2.23 Section 2.37 Section 2.40 Sections 2.46 - 2.49 3.1 06.26.97 Sections 1.0 - 1.2 Addition of models DR-A10X, DR-411, DR- Section 1.4 U10X, DR-433
Summary of the content on the page No. 13
Preface 1. PREFACE These specifications define the SCSI command set that defines the interface between a host computer and such primary devices as CD-ROM drives and CD-R writers. These are the control functions for the Pioneer DRM/DR-U series CD-ROM drives. For specific models, refer to Section 1.1 below. For details of the common standard of SCSI, refer to ANSI SCSI-2 working draft X3T9.2 revision 10K. For details regarding the use of the compact disc as a SCSI CD-ROM device, refer to the propo
Summary of the content on the page No. 14
CD-ROM SCSI-2 COMMAND REFERENCE MANUAL VERSION 3.1 (OB-U0077C) TABLE 1-0 MODELS OF DRM/DR-U SERIES SUPPORTING SCS-2 COMMAND SET Model Number Voltage Requirements DRM-602X 100 v ~ 230 v DRM-604X 100 v ~ 230 v DRM-624X 100 v ~ 230 v DRM-1804X 100 v ~ 230 v DR-D504X DRM-5004X 500-disc Autochanger built-in use DR-U124X +5 v. +12 v DR-UA124X +5 v. +12 v ATA BUS mode1 DR-A10X +5 v. +12 v ATA BUS mode1 DR-U10X +5 v. +12 v DR-411 +5 v. +12 v OEM version of DR-A10X DR-433 +5 v. +12 v OEM version of D
Summary of the content on the page No. 15
Preface The DRM-1804X is an 18-disc single drive SCSI-2 CD-ROM changer. It appears on the SCSI bus as one SCSI ID with two (2) logical units. The single CD-ROM reader is logical unit 0 and the changer is logical unit 1. For detail information, refer to Pioneer’s DRM-1804X CD-ROM Jukebox Changer Mechanism Controller SCSI Specifications, document number OB-U0084-B. The DRM series includes two jukebox changers - the DRM-1004X 100-disc CD-ROM changer and the DRM-5004X 500-disc CD-ROM changer. For de
Summary of the content on the page No. 16
CD-ROM SCSI-2 COMMAND REFERENCE MANUAL VERSION 3.1 (OB-U0077C) 1.3 SCSI Protocol The SCSI Protocol outlined in this section applies only to SCSI bus models. It does not support ATA bus models. 1.3.1 Command Link/Control Field The Control Field inside the Command Block is defined as: Bit 7 6 5 4 3 2 1 0 Vendor Unique Reserved Flag Link The Command Link function is not supported by the DRM/DR-U Series. Set Flag and Link bits to “0” (FALSE). Set the RelAdr (Relative Address) bit, bit 0 of byte 1, i
Summary of the content on the page No. 17
Preface 1.3.3 Status Phase Four status conditions are supported. They are GOOD 00h CHECK CONDITION 02h BUSY 08h RESERVATION CONFLICT 18h When the IMMED bit is set to “1” (TRUE) in a command block, the drive returns GOOD when the command is first interpreted. As the command is being executed, the drive returns BUSY to successive commands until operation of the first command is complete and the drive is ready to receive a new command. Refer to Section 2.31 REQUEST SENSE for details on deferred err
Summary of the content on the page No. 18
CD-ROM SCSI-2 COMMAND REFERENCE MANUAL VERSION 3.1 (OB-U0077C) TABLE 1-5 SAMPLE COMMAND Bit Byte 7 6 5 4 3 2 1 0 0 Operation Code (XXh) 1 Logical Number Reserved 2 Logical Block Address (MSB) 3 Logical Block Address 4 Logical Block Address 5 Logical Block Address (LSB) 6 Reserved 7 Allocation Length (MSB) 8 Allocation Length (LSB) 9 Reserved Operation Code : XXh Logical Unit Number specifies which Logical Unit the command applies to. Logical Block Address specifies which Logical Block Address (L
Summary of the content on the page No. 19
Preface Message Out-Phase (issued by host computer) INITIATED DEFECTED ERROR 05h ABORT 06h NO OPERATION 08h MESSAGE PARITY ERROR 09h 3 BUS DEVICE DRIVER 0Ch TERMINATE IO PROCESS 11h IDENTIFY 80h - FFh 4 SYNCHRONOUS DATA TRANSFER REQUEST 01h 1.4 Address Format for Answering Occasion (MSF bit) With some commands, it is possible to choose either Logical Block Address or MSF Format with Address Field of answering data. MSF bit if “0” (FALSE), use Logical Block Address as CD-ROM Absolute Address or T
Summary of the content on the page No. 20
CD-ROM SCSI-2 COMMAND REFERENCE MANUAL VERSION 3.1 (OB-U0077C) The drive terminates the DATA IN phase when the specified number of bytes have been transferred or, in the case when the bytes exceed the number of bytes the drive wishes to transfer, the DATA IN phase is terminated when the number of bytes prepared have been transferred. - 8 -
