Our goal is to provide you with a quick access to the content of the user manual for Zanussi ZI 921/8 FF. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Zanussi ZI 921/8 FF.
If looking through the Zanussi ZI 921/8 FF user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Zanussi ZI 921/8 FF but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Zanussi ZI 921/8 FF. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
ZI 921/8 FF
IMPORTANT SAFETY INFORMATION It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of safety.You MUST read it care
CONTENTS Instructions for the User Instructions for the Installer Important Safety Information 2 Technical Specification 13 Operation 4 Before using 4 14 Installation Control panel - Use of the freezer 4 Positioning 14 Start your appliance 4 Shelf holders 14 Temperature control 4 Electrical Connection 15 Quick-freezing 5 Instruction for totally built-in Freezing fresh food 5 appliances - Door Reversal 16 Frozen food storage 5 Recess dimensions 16 Thawing 5 Installing the Applince into it’s Hous
OPERATION Before using Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry thoroughly. Control panel A - Pilot light - Green B - Thermostat control knob C - Fast freeze light - Yellow D - Fast freeze switch Control Panel - Use of the freezer Temperature control The temperature within the freezer is controlled by A. Pilot light the thermostat situated in th
Fast-freezing Important For fast-freezing, push the fast freeze switch (D). The super control light (C) will then light up. In the event of a power cut the food in the freezer will The Fast-freezing function accelerates the freezing not be affected if the power cut is short and if the of fresh food and, at the same time, protects freezer is full. Do not open the door. Should the food foodstuffs already stored from undesirable warming. begin to thaw, it must be consumed quickly and must If this
Use of the refrigerator Normal Operating Sounds The thermostat regulates for both freezer and You may hear faint gurgling or bubbling sounds refrigerator compartments. when the refrigerant is pumped through the coils or tubing at the rear, to the cooling Setting the temperature plate/evaporator or to the fixed freezer shelves. Position = minimum coldness When the compressor is on, the refrigerant is being pumped round, and you will hear a whirring Position = maximum coldness sound or pu
Movable shelves The walls of the refrigerator have runners so that the shelves can be positioned as desired . For better use of space, the front half-shelves can lie over the rear ones. Bottle rack Place bottles in the rack with the bottleneck to the front. Important: Only store unopened bottles horizontally. The bottle rack can be tilted for storing opened bottles. To do this pull the bottle rack forward until it can be tilted upwards, then slide the front support into the next level up. P
HINTS AND TIPS Try to avoid keeping the door open for long Food Storage periods, or opening the door too frequently as To obtain the best results from your appliance, warm air will enter the cabinet, and cause the neither hot foods nor liquids which may compressor to switch on unnecessarily often. evaporate, should be placed in the larder Ensure there are no obstructions preventing the compartment. door from closing properly. Keep the time between buying chilled food and In the Event of
MAINTENANCE AND CLEANING Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the ELECTRICITY supply. Internal cleaning Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and dry thoroughly. NEVER USE DETERGENTS, ABRASIVE POWDERS, HIGHLY PERFUMED CLEANING PRODUCTS OR WAX press on the rear hook and at the same time slide the POLISHES,TO CLEAN THE INTERIOR AS cover in the direction indicated by the arrow. TH
SOMETHING NOT WORKING Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation a charge will be made, even if the appliance is under guarantee. Before contacting your local Service Force Centre, check the following points: Symptom Solution No power to the appliance Check there is power at the socket. Check there is not a power cut by checking the household lights. Check the fuse has not blown. The light does not come on Ensure t
SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:- 0870 5 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.uk For Customer Service in the Republic of Irela
GUARANTEE CONDITIONS Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of the purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. The appliance has been u
TECHNICAL SPECIFICATIONS POWER SUPPLY VOLTAGE AND FREQUENCY 220-240 V / 50 Hz TOTAL POWER ABSORBED 160 W AVERAGE DAILY UNITS ELECTRICITY * 1.10 kWh GROSS CAPACITY Fridge 214 l Freezer 68 l NET CAPACITY Fridge 210 l Freezer 55 l STAR RATING * This figure is based on standard test results in accordance with European Standard EN 153. Actual consumption will depend on how the appliance is used and where it is located. 13
INSTALLATION Important Warning IF YOU ARE DISCARDING AN OLD APPLIANCE It must be possible to disconnect the appliance from THAT HAS A LOCK OR CATCH ON THE DOOR, the mains power supply; the plug must therefore be YOU MUST ENSURE THAT IT IS MADE easily accessible after installation. UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE. Depending upon the position which you choose for your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions on “D
For replacement, use a 13amp BSI362 fuse. Only ASTA or BSI approved fuses should be used. Electrical connections The plug must not be used if the fuse cover/carrier is Any electrical work required to install this appliance lost. The cover/carrier is indicated by the coloured should be carried out by a qualified electrician or insert at the base of the plug. competent person. A replacement cover/carrier must be obtained from WARNING:THIS APPLIANCE MUST BE your local Zanussi Service Force Centre.
Instructions for totally built-in appliances Door reversal The appliance is supplied with the right or left door opening.To change the opening direction of the door proceed as in the following instructions before installing it. 1. Unscrew the upper pin and remove the spacer 2. Remove the upper door 3. Remove the hinge cover (A). Unscrew the pins (B) and the spacers (C) and refit them on the middle hinge of the opposite side. Snap the hinge cover (A). 4. Refit the upper door, the upper
Push appliance into housing until stop strip (A) touches the kitchen unit. For a correct alignment make sure that the distance between the appliance and the cabinet is 44 mm. Open the door and push the appliance against the side of the kitchen unit opposite to that of appliance hinges. Fasten the appliance with 4 screws provided in the kit included with the appliance. Snap the ventilation grille (C) and hinge cover (D) into position Press in the joint covers between the ap
Separate parts A, B, C, D as shown in the figure Place guide (A) on the inside part of the furniture door, in the upper and lower position as shown in the figure and mark the position of external holes. Having drilled the holes, fix the guide with the screws supplied. Fix cover (C) on guide (A) until it clips into place. Open the appliance door and the furniture door at 90°. Insert the small square (B) into guide (A). Put together the appliance door
Should adjustment of the furniture door be necessary, use the clearance of slots as required. At the end of operations, it is necessary to check if the door of the furniture closes properly. Fix cover (D) on guide (B) until it clips into place. If the appliance is fixed to the side of the kitchen unit, simply slacken the screws in fixing brackets (E), move the brackets as shown in the figure and re- tighten the screws. After completion of the door reversing operation, check
© Electrolux plc 2004