Summary of the content on the page No. 1
cm203_face.qxd 6/9/06 5:37 PM Page 1
CM.203
DUALTABLETOPCDPLAYERWITHMIXER
USERMANUAL
Summary of the content on the page No. 2
cm203_face.qxd 6/9/06 5:37 PM Page 2 IMPORTANT SAFETY INSTRUCTIONS 16. Servicing – Do not attempt any service to the appliance beyond that described 1. Read Instructions – All the safety and operating instructions should be read before in the operating instructions. All other servicing should be referred to qualified this product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for service personnel. 17. Ventilation – Slots and openings in the cab
Summary of the content on the page No. 3
cm203_face.qxd 6/9/06 5:37 PM Page 3 WARRANTY & RETURN POLICY INTRODUCTION The CM.203 is the perfect CD mixer for the DJ looking for simplicity backed by professional quality. This versatile unit features dual top loading CD play- Warranty ers and built-in line inputs for your iPod® and other portable media devices so you can easily access a variety of music sources! The CM.203 makes it Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors
Summary of the content on the page No. 4
cm205_face.qxd 6/9/06 5:38 PM Page 4 INSTALLING THE RACK EARS SPECIFICATIONS • Installing the Rack Ears MIXERSECTION :: STEP 1 :: FREQUENCY RESPONSE (Line to Master Output) 20 Hz to 20 kHz +/- 2 dB Place the unit upside down over a pad, pillow, or towel to avoid damaging the control surface. THD+N (Line) <0.01% at 1 kHz S/N RATIO: REF TO MAX OUTPUT LEVEL (Dynamic Range) >90 dB Noise Floor (Line Input to Any Output) (Unbalanced Out) < -85 dBV (Line to Line,Phono to Line,Line to Phono) CROS
Summary of the content on the page No. 5
cm203_face.qxd 6/9/06 5:37 PM Page 5 REAR PANEL FUNCTIONS QUICK SETUP DIAGRAM Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers. Additionally, you can connect 33. POWER SWITCH – Turns unit off and on. Note*** Remember to turn the REC output to any recording device such as
Summary of the content on the page No. 6
cm203_face.qxd 6/9/06 5:37 PM Page 6 CD PLAYER FUNCTIONS LCD DISPLAY FUNCTIONS 16. FRAMES – The CD Player breaks down a second into 75 frames for accurate cueing. This shows the frames elapsed or remaining depending on mode setting. 17. TOTAL REMAIN – Displays the total remaining time for the entire disc. 18. REMAIN – Displays the remaining time for the current track. 19. PITCH – Shows the percentage change in pitch. 20. TIME BAR – This bar gives a visual approximation of a track’s or disc’s
Summary of the content on the page No. 7
cm203_face.qxd 6/9/06 5:37 PM Page 6 CD PLAYER FUNCTIONS LCD DISPLAY FUNCTIONS 16. FRAMES – The CD Player breaks down a second into 75 frames for accurate cueing. This shows the frames elapsed or remaining depending on mode setting. 17. TOTAL REMAIN – Displays the total remaining time for the entire disc. 18. REMAIN – Displays the remaining time for the current track. 19. PITCH – Shows the percentage change in pitch. 20. TIME BAR – This bar gives a visual approximation of a track’s or disc’s
Summary of the content on the page No. 8
cm203_face.qxd 6/9/06 5:37 PM Page 5 REAR PANEL FUNCTIONS QUICK SETUP DIAGRAM Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers. Additionally, you can connect 33. POWER SWITCH – Turns unit off and on. Note*** Remember to turn the REC output to any recording device such as
Summary of the content on the page No. 9
cm205_face.qxd 6/9/06 5:38 PM Page 4 INSTALLING THE RACK EARS SPECIFICATIONS • Installing the Rack Ears MIXERSECTION :: STEP 1 :: FREQUENCY RESPONSE (Line to Master Output) 20 Hz to 20 kHz +/- 2 dB Place the unit upside down over a pad, pillow, or towel to avoid damaging the control surface. THD+N (Line) <0.01% at 1 kHz S/N RATIO: REF TO MAX OUTPUT LEVEL (Dynamic Range) >90 dB Noise Floor (Line Input to Any Output) (Unbalanced Out) < -85 dBV (Line to Line,Phono to Line,Line to Phono) CROS
Summary of the content on the page No. 10
cm203_face.qxd 6/9/06 5:37 PM Page 3 WARRANTY & RETURN POLICY INTRODUCTION The CM.203 is the perfect CD mixer for the DJ looking for simplicity backed by professional quality. This versatile unit features dual top loading CD play- Warranty ers and built-in line inputs for your iPod® and other portable media devices so you can easily access a variety of music sources! The CM.203 makes it Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors
