Summary of the content on the page No. 1
Micro Furnace
Ceramic Disc Heaters
Instruction Booklet
This book covers the use and care of the following Micro Furnace heaters:
MF2000 2000W Micro Furnace Ceramic Disc Heater
MF1500 1500W Micro Furnace Ceramic Disc Heater
Please read these instructions carefully
and retain for future reference.
Summary of the content on the page No. 2
Contents Sunbeam’s Safety Precautions 1 Safety Precautions for your heater 2 Sunbeam’s Total Safety System 3 Features of your 2000W Micro Furnace 4 Features of your 1500W Micro Furnace 6 Using your heater 8 Care and cleaning 9
Summary of the content on the page No. 3
Sunbeam’s Safety Precautions Sunbeam are very safety conscious when • Do not use an appliance for any purpose designing and manufacturing consumer products, other than its intended use. but it is essential that the product user also • Do not place an appliance on or near a hot gas exercise care when using an electrical appliance. flame, electric element or on a heated oven. Listed below are precautions which are essential Do not place on top of any other appliance. for the safe use of an electr
Summary of the content on the page No. 4
Sunbeam’s Safety Precautions • This heater becomes hot during use. To avoid • Do not locate the heater immediately below a burns, do not let bare skin touch hot surfaces. socket outlet. If provided, use handles when moving this • Do not use this heater in the immediate heater. Keep combustible materials such as surrounds of a bath, shower, laundry area or furniture, pillows, bedding, papers, clothes and swimming pool. curtains at least 3 feet (90cm) away from the • Do not insert or allow foreign
Summary of the content on the page No. 5
Sunbeam’s Total Safety System Safety auto shut off Thermal back-up fuse Your Sunbeam Micro Furnace Heater is In addition to this automatic cut off, your equipped with a safety system that detects heater contains a thermal back-up fuse to any abnormally high temperatures within provide additional back-up protection. If the heater and automatically shuts it off to the heater is in an overheat situation, the prevent overheating. This first stage of the back-up fuse will open, stopping the power saf
Summary of the content on the page No. 6
Features of your 2000W Micro Furnace heater Electronic thermostat The electronic thermostat works with the external temperature sensor to maintain your selected temperature. It constantly monitors the room’s temperature and continuously varies the heat output to maintain your desired comfort level. Ceramic disc heating system Each ceramic disc contains 1200 honeycomb shaped holes that heat all of the air that passes through them, generating up to 40% more warmth than conventional coil or cerami
Summary of the content on the page No. 7
Temperature light The temperature light illuminates red once the selected temperature level is reached. Removable dust filter The filter collects dirt and dust from the air circulating through the heater. It is removable for easy cleaning. Mode/Standby button Use the standby button to select the desired operating mode. Pressing the standby button once selects the AUTO mode, twice selects the MANUAL mode, and pressing a third time selects the STANDBY mode. AUTO mode Select AUTO mode for thermosta
Summary of the content on the page No. 8
Features of your 1500W Micro Furnace heater Mode dial Use the mode dial to select the desired operating mode: FAN to circulate cool air; HEAT to operate the heater, or OFF. Thermostat dial Use the thermostat dial to select the desired temperature, from 10°C to 27°C. Once the selected temperature level is reached, the thermostat will contantly adjust the heat output to maintain it. Tip over cut-out Should your heater accidentally be knocked over, the instant tip over cut will automatically inter
Summary of the content on the page No. 9
Power light Illuminates to indicate that the heater is connected to the power outlet and is switched on. Temp limit light Illuminates to indicate that the room has reached the selected temperature. Removable dust filter The filter collects dirt and dust from the air circulating through the heater. It is removable for easy cleaning. Ceramic disc heating Each ceramic disc contains 1200 honeycomb shaped holes that heat all of the air that passes through them, generating up to 40% more warmth than c
Summary of the content on the page No. 10
Using your heater MF2000 Micro Furnace Ceramic Disc Heater 1. Place the heater on a flat level surface, The selected temperature (in degrees approximately 1 metre from any wall or celsius) will flash several times to indicate other objects such as furniture, curtains, that it is set. The screen will then return plants or combustible material, and ensure to displaying the current room that the air intake and outlet are clear of temperature. The thermostat will continue obstructions. to vary the h
Summary of the content on the page No. 11
Using your heater (continued) MF1500 Micro Furnace Ceramic Disc Heater 1. Place the heater on a flat level surface, 3. To operate the heater, select HEAT on approximately 1 metre from any wall or the mode dial. Rotate the thermostat dial other objects such as furniture, curtains, to select the desired temperature setting. plants or combustible material, and ensure Once the selected temperature level has that the air intake and outlet are clear of been reached, the thermostat will obstructions.
Summary of the content on the page No. 12
Consumer Hotline Australia 1800 025 059 New Zealand (09) 912 0747 www.sunbeam.com.au is a registered trademark of Sunbeam Corporation Limited. is a registered trademark of Pelko Electric Company and is used under licence by Sunbeam Corporation Limited. Made in China. Due to minor changes in design or otherwise, the product you buy may differ from the one shown in this leaflet. Backed by Sunbeam‘s 3 Year Replacement Guarantee and National Service Network. © Copyright. SUNBEAM CORPORATION LIMITE
