Hunter Fan 42620-01 user manual

User manual for the device Hunter Fan 42620-01

Device: Hunter Fan 42620-01
Category: Fan
Manufacturer: Hunter Fan
Size: 2.22 MB
Added : 5/29/2014
Number of pages: 14
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Hunter Fan 42620-01. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Hunter Fan 42620-01.

For your convenience

If looking through the Hunter Fan 42620-01 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Hunter Fan 42620-01 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Hunter Fan 42620-01 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Hunter Fan 42620-01 User manual - Online PDF
Advertisement
« Page 1 of 14 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Hunter Fan 42620-01 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Hunter Fan 42620-01. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

English Español
For Your Records and
Warranty Assistance
T T Type 2 Models ype 2 Models ype 2 Models
For reference, also attach your receipt or a copy
of your receipt to the manual.
Owner’s Guide and Installation Manual
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42620-01
20091109
©2009 Hunter Fan Co.

Summary of the content on the page No. 2

Welcome Your new Hunter ceiling fan is an addition to your home or office that ® will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter namepl

Summary of the content on the page No. 3

Installer’s Choice and Optional Accessories Understanding Mounting and Installer’s Choice® Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include Ceiling Standard instructions for all three Installer’s Choice mounting methods. Outlet Box Mounting Style Co

Summary of the content on the page No. 4

1 • Getting Ready To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (magne

Summary of the content on the page No. 5

2 • Installing the Ceiling Plate CAUTION: To avoid possible electrical shock, before installing your fan, Toward disconnect the power by turning off the circuit breakers to the outlet box Ceiling Peak and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. 2-1. Drill two pilot holes into the wood support structure through the outermost holes in the outlet box. The pi

Summary of the content on the page No. 6

3 • Assembling and Hanging the Fan WARNING: Fan may fall if not assembled as directed in these Standard or Angled Mounting installation instructions. Steps 3-2 – 3-3 3-1. Unbundle the wires from the fan. Downrod For Standard or Angled mounting: 3-2. Insert the downrod through the canopy and canopy trim ring. Canopy Feed the wires from the fan through the downrod on one side of the pin in the ball. Canopy 3-3. Loosen the square head setscrew on the adapter to install the pipe Setscr

Summary of the content on the page No. 7

fsdfsdf 4 • Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wire Connector Wall switches are not included. Select an acceptable general-use switch in accordance with national and local electrical codes. 4-1. Before attempting installation, make sure the power is still off. 4-2. To connect the wires, hold the bare metal leads together and place a wire connector over the

Summary of the content on the page No. 8

5 • Installing the Canopy and Canopy Trim Ring WARNING: Failure to complete the following steps could cause the fan Step 5-1 to fall. Note: It is recommended you use a magnetic tip screwdriver for the following steps. Tab 5-1. Rotate the hanger ball so the tab in the canopy is secure in the hanger ball groove. Note: Your fan may have multiple tabs and Groove grooves that must be aligned. 5-2. Swing the fan up to align the canopy screw holes with the mounting holes on the ceiling plate.

Summary of the content on the page No. 9

6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, Step 6-1 (Detail) insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. This is normal. 6-3. Remove the blade mounting screws and rubber shipping bumper

Summary of the content on the page No. 10

7 • Completing Your Installation With or Without a Multi Staked Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. The steps below direct you whether or not you are installing a light fixture. WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially ins

Summary of the content on the page No. 11

7 • Completing Your Installation With or Without a Multi Staked Light Fixture (Cont.) 7-6. To attach the lower switch housing, connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly. Lower Switch Note: Both plug connectors are polarized and will only Housing fit together one way. Make sure the connectors are Shade properly aligned before connecting them. Incorrect Cup connection could cause improper operation and damage to the

Summary of the content on the page No. 12

7 • Completing Your Installation With or Without a Light Fixture (continued) Uninstalling the Light Fixture 1. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the black/white wire. 2. Disconnect the plug connectors between the two white Nut wires. Washer 3. Uninstall the nut and washer from the end of the light fixture inside the lower switch housing. 4. Unscrew the threaded rod of the light fixture from the lower switch housing. 5. Remove the

Summary of the content on the page No. 13

8 • Operating and Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Off. • Pull the chain slowly to change settings. • Release slowly to prevent the chain from recoiling into the blades. • The chain uses a breakaway connector that separates if the chain is jerked. If this happens, simply reinsert the chain into the connector. 8-3. The light pull chain contr

Summary of the content on the page No. 14

9 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing. 4. Push motor reversing switch firmly left or right to ensure that the switch is engaged. 5. Pull the pull chain to ensure it is on. 6. Remove the shipping bumpers. Problem: Noisy operation. 1. Tighten the blade assembly screws and blade iron armatur


Alternative user manuals
# User manual Category Download
1 Hunter Fan 20081013 User manual Fan 9
2 Hunter Fan 20091015 User manual Fan 4
3 Hunter Fan 20091104 User manual Fan 0
4 Hunter Fan 20345 User manual Fan 3
5 Hunter Fan 20081008 User manual Fan 0
6 Hunter Fan 20349 User manual Fan 0
7 Hunter Fan 20091105 User manual Fan 0
8 Hunter Fan 20347 User manual Fan 1
9 Hunter Fan 20404 User manual Fan 0
10 Hunter Fan 20400 User manual Fan 2
11 Hunter Fan 20409 User manual Fan 0
12 Hunter Fan 20406 User manual Fan 2
13 Hunter Fan 20091209 User manual Fan 0
14 Hunter Fan 20415 User manual Fan 0
15 Hunter Fan 20430 User manual Fan 0
16 A.O. Smith 160M User manual Fan 5
17 A.O. Smith 200M User manual Fan 2
18 A.O. Smith HW-120M User manual Fan 0
19 Acnodes EPSON PERFECTION 1200S User manual Fan 1
20 Aero Mist 67014 User manual Fan 0