Summary of the content on the page No. 1
Owner’s
Manual
Ceiling Fan Installation Instructions
Total fan weigh
with light
For 5GMR52XXD Series Fans
READ AND SAVE THESE INSTRUCTIONS
Quality Ceiling fans
Summary of the content on the page No. 2
Installation SAFETY TIPS WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS 1. Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70- 1999), including fire-rated construction. 2. Use this unit only in the manner intended by the manufacurer. If you have any questions contact the manufacturer. 3. After making the wire connections,
Summary of the content on the page No. 3
7 9 8 Tighten 2 downrod set screws and Place upper glass over downrod and Align hole in downrod with hole in lock nuts. yoke and install cross pin. Install canopy onto the fan body. downrod into yoke. Install keeper into cross pin. 11 10 12 Remote Transmitter Dip swtiches Remote Receiver Dip switches Set dip switches on the Remote Transmitter and Remote Receiver to the same settings. This must be done so the Raise fan with downrod assembled to units will communcate properly. If you have other
Summary of the content on the page No. 4
19 20 21 Check the motor for shipping stabilizer Loosen 3 screws with key slots and and remove if present. The screws, wash- Twist lower cover plate into place by ers and motor pads are pre-installed to remove the 1 screw with closed slot. twisting in direction of arrow. the blade holders. Attach blade assembly Save screw removed. Replace 1 screw removed and tighten to motor and tighten screws securely. all 4 screws securely. 24 23 22 Place light kit over screws and twist direction of arrow i
Summary of the content on the page No. 5
31 32 Fan speed Light dim- control but- mer for up tons and down lights Fan on / off To control fan speed select from High, Medium or low speed buttons. To turn the fan off press the Fan on / off button. To dim upper lights Reverse function for this fan is a press and hold U/L botton. To dim Lower lights switch on top housing of the fan press and hold D/L button. To turn off either body. Turn fan off and flip switch to up or down light press and quickly release either U/L or D/L button. reve
Summary of the content on the page No. 6
Trouble Shooting If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, or you are experiencing difficulty in installation, please call our Customer Service Center at the number printed on your parts list insert sheet. Warning: Before servicing or cleanin
