Summary of the content on the page No. 1
APPLICATION GUIDE
•Heat pump
•Cooling Capacities of 8 a 13 kW
FLOOR STANDING
Summary of the content on the page No. 2
INSTALLATION TECHNICAL DATA VERTICAL FLOOR SPLIT. HEAT PUMP R22 HEAT PUMP UNIT VHA 30 VHA 50 Cooling capacity W 8.150 12.895 Heating capacity W 8.150 14.070 Cooling mode power input kW 3 4,5 Heating mode power input kW 2,8 4,5 Current Cool A 14,5 7,8 Heat A 13,5 7,5 Voltage: 50 Hz V/f 230/I 400/III Indoor U. air flow (Height) m3/h 1140 2100 Compressor Type Reciprocating Reciprocating Sound level Indoor U. dB(A), Height, 1m 46 48 Outdoor U. dB(A), Height, 1m 58 58 Bevel coupling pipe Liquid 3/8"
Summary of the content on the page No. 3
Features and Specifications Features Designed for cooling and heating Removable air filter 1 6 Super energy efficiency Anti-Bacteria filter 2 7 Micom control 3 minutes delay circuit 3 8 Whisper quiet operation Auto restart 4 9 Wireless remote control 5 Specifications Air Outlet Vent Remote Signal Receptor Air Inlet Vent (Rear) Air Inlet Vent Air Outlet Vent 2 Troubleshooting Tips Care and Maintenance Operating Instructions Safety Precautions
Summary of the content on the page No. 4
ENGLISH A/CL A/CL Indoor Unit Controls and Indicators The remote control transmits the signals to the system. Features of the Remote Control- Door Closed 6 7 9 10 12 13 14 15 6 7 11 8 13 14 15 5 5 M M L H L H OUT OUT DOOR ROOM TEMP SET TEMP ROOM TEMP SET TEMP DOOR 2 3 4 1 2 3 4 1 (Heat Pump Model) (Cooling Model) START/STOP BUTTON HEATING OPERATION LAMP 9 1 Operation starts when this button is pressed and stops when the button is pressed again. ELECTRIC HEATER OPERATION LAMP 10 (Option) OPERATIO
Summary of the content on the page No. 5
Name and Function-Remote Control Control Signal Transmitter 1 • Transmits the signals to the Floor standing Type air conditioner 1 Operation Display of the Remote 2 Control Indoor Fan Speed Selection Button 3 • To select the desired fan speed in three steps [Low, Med, High] 2 Cooling ON Button 12 4 Temperature Setting Buttons 5 11 Power ON/OFF Button 6 • Operation will start when this button is 4 9 pressed, and stop when the button is 10 pressed again. Timer Set Button 7 8 7 • Each time the butt
Summary of the content on the page No. 6
ENGLISH Remote Control Preparation How to mount onto a wall 1 Use the screws to secure the holder to the wall or attach the holder side of indoor unit. 2 To insert the remote control to the holder. Insert Pull How to insert batteries • Do not use rechargeable Remove the cover from the batteries such batteries back of the remote controller. are different from • Slide the cover according to standard dry cells in the arrow direction. shape, dimensions, and performance. Insert two batteries. • Be su
Summary of the content on the page No. 7
Air conditioner operation How to use the Operation Mode Button 1 • Each time the Operation Mode Selection Button is pressed, the Operation Mode is shifted in the arrow direction. H H OUT OUT DOOR DOOR ROOM TEMP SET TEMP ROOM TEMP SET TEMP Cooling Operation Soft Dry Operation H H OUT OUT DOOR ROOM TEMP SET TEMP DOOR ROOM TEMP SET TEMP Heating + E/Heater Operation Heating Operation (model only with Electirc heater) (Heat pump Model) H H H OUT OUT OUT DOOR DOOR DOOR ROOM TEMP SET TEMP ROOM
Summary of the content on the page No. 8
ENGLISH Cooling Operation Mode 3 Press the Start/Stop Button. 1 Select Cooling Operation. Press the Operation Mode Selection Button. 2 Press the Cooling Operation Button on the remote controller. H OUT ROOM TEMP SET TEMP DOOR Set the temperature lower than the room temperature. 3 Thetemperaturecanbesetwithinarangeof16°C~30°Cby1°C. To raise the temperature H To lower the temperature OUT DOOR ROOM TEMP SET TEMP Set the Fan Speed. 4 • Each time the Button is pressed, the Fan Speed mode is shifted.
Summary of the content on the page No. 9
Soft Dry Operation 4 Press the Start/Stop Button. 1 Select Soft Dry Operation. Press the Operation Mode Selection Button. 2 Press the Soft Dry Operation Button on the remote controller. H OUT DOOR ROOM TEMP SET TEMP Set the temperature lower than the room temperature. The temperature can be set within a range of 16°C~30°Cby1°C. 3 H OUT DOOR ROOM TEMP SET TEMP To raise the temperature To lower the temperature During soft Dry Operation • The indoor fan speed is automatically set to low. 8 E E D D
Summary of the content on the page No. 10
ENGLISH Heating Operation Mode(Heat Pump Model Only) 5 Press the Start/Stop Button. 1 Select heating Operation. Press the Operation Mode Selection Button. 2 Press the heating Operation Button on the remote controller. H OUT DOOR ROOM TEMP SET TEMP Set the temperature upper than the room temperature. The temperature can be set within a range of 16°C~30°C by 1°C. 3 H OUT DOOR ROOM TEMP SET TEMP To raise the temperature To lower the temperature Set the Fan Speed. 4 • Each time the Button is pressed
Summary of the content on the page No. 11
Electric Heater Operation Mode(Option) 6 Press the Start/Stop Button. 1 Select heating+ E/heater Operation. Press the Operation Mode Selection Button. 2 Press the Heater Operation Button on the remote controller.(When the unit operates in heating mode.) H OUT DOOR ROOM TEMP SET TEMP Set the temperature upper than the room temperature. The temperature can be set within a range of 16°C~30°Cby1°C. 3 H To raise the temperature OUT DOOR ROOM TEMP SET TEMP To lower the temperature Set the Fan Speed. 4
Summary of the content on the page No. 12
ENGLISH Auto Operation Mode(Cooling Model Only) 7 Press the Start/Stop Button. 1 Select Auto Operation. Press the Operation Mode Selection Button. 2 Press Auto Operation Button on the remote controller. H OUT DOOR ROOM TEMP SET TEMP Set the temperature upper than the room temperature. The temperature can be set within a range of 16°C~30°Cby1°C. 3 H OUT ROOM TEMP SET TEMP DOOR Cold Cool Proper Warm Hot (This indication will be shifted to the initial Auto Mode Display state after 4 seconds.) To ra
Summary of the content on the page No. 13
Fan Operation Mode(Cooling Model Only) 8 Press Fan Operation Button. Press the Start/Stop Button. 1 2 H OUT DOOR ROOM TEMP SET TEMP Set the Fan Speed. 3 ❑ Each time the Button is pressed, the Fan Speed mode is shifted. Airflow Direction Procedure 9 Press the Auto Swing Button and then Press the Start/Stop Button. louvers will swing left and right. 1 2 Press the Airflow Direction ControlButtonagaintoset the Vertical louver at the desired airflow direction. (Operation will start when the button is
Summary of the content on the page No. 14
ENGLISH OFF Timer Setting Procedure(OFF TIMER Setting, or CANCEL) 10 Press the Start/Stop Button. 1 Press the Timer Button. 2 H OUT DOOR ROOM TEMP SET TEMP • If you press the button, the selected off timer is displayed as follows; • If you select‘’, the Off Timer function will be cancelled. When you finish the Off Timer setting, the Timer indicator lights off. 3 After 4 seconds H H OUT OUT DOOR DOOR ROOM TEMP SET TEMP ROOM TEMP SET TEMP During off-timer operation if you press the Timer Button, t
Summary of the content on the page No. 15
Child Lock Operation Procedure 11 Press the low and high temperature setting buttons simultaneously for 3 seconds. The unit will respond with beep. 1 H H H OUT OUT OUT ROOM TEMP SET TEMP DOOR ROOM TEMP SET TEMP DOOR ROOM TEMP SET TEMP DOOR After 3 seconds, After 3 seconds, it will be shifted. it will be shifted. During Child Lock Operation 2 Whenever you press any Button on Display Panel, it will immediately display “”, which means Display panel is Locked. ❷ All the Button on the indoor unit D
Summary of the content on the page No. 16
ENGLISH Care and Maintenance CAUTION: Before performing any maintenance, turn off the main power to the system. During the season Cleaning of the air filters. Cleaning of the air cleaner. Recommended about once every two weeks Recommended about once every three months Remove the Air Filter. Remove the Air Cleaner. Take hold of the tab and pull slightly forward to Take hold of the tab and pull slightly forward to remove the filter. remove the air cleaner. Clean. Clean. • Dip the air cleaner into
Summary of the content on the page No. 17
Before you call for service... Troubleshooting Tips! Save time and money! ? Check the following points before requesting repairs or service.... If the fault persists, please contact your dealer or service center. Case Explanation See page Does not operate. • Have you made a mistake in timer operation? • Has the fuse blown or has the circuit breaker been tripped? • Is the power Switch at Off? - • Is the unit at the starting of Heating Operation? If yes, Hot-start is activating. • Is the unit in t
Summary of the content on the page No. 18
!"# $% &'("))*!+,&-&**+#,&*&.#/+(
01 2 $$222 !"# 3%2 % &'(")4"*5"-4"*5"/6
3 !"# 3$ 33 &'(")"//.&)-&**+#!7"*/&/+(
8 (,8 % % %3% !"# % % %3% &'("))*!+9&-&**+#9&.:/;"*9/+(
%
