A.O. Smith 1000 SERIES 100 user manual

User manual for the device A.O. Smith 1000 SERIES 100

Device: A.O. Smith 1000 SERIES 100
Category: Water Heater
Manufacturer: A.O. Smith
Size: 0.59 MB
Added : 5/4/2014
Number of pages: 24
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for A.O. Smith 1000 SERIES 100. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with A.O. Smith 1000 SERIES 100.

For your convenience

If looking through the A.O. Smith 1000 SERIES 100 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual A.O. Smith 1000 SERIES 100 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual A.O. Smith 1000 SERIES 100 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
A.O. Smith 1000 SERIES 100 User manual - Online PDF
Advertisement
« Page 1 of 24 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual A.O. Smith 1000 SERIES 100 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to A.O. Smith 1000 SERIES 100. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

GAS-FIRED POWER BURNER
COPPER BOILERS FOR HYDRONIC HEATING
AND HOT WATER SUPPLY
USER’S MANUAL
• Installation
MODELS:
• Operation
VB/VW-500, 750 AND 1000
• Maintenance
SERIES 100/101
• Limited Warranty
WARNING: If the information in this
manual is not followed exactly, a fire or
explosion may result causing property
damage, personal injury or loss of life.
— Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
— WHAT TO DO IF YOU SMEL

Summary of the content on the page No. 2

SAFE INSTALLATION, USE AND SERVICE Your safety and the safety of others is extremely important in the installation, use, and servicing of this boiler. Many safety-related messages and instructions have been provided in this manual and on your own boiler to warn you and others of a potential injury hazard. Read and obey all safety messages and instructions throughout this manual. It is very important that the meaning of each safety message is understood by you and others who install, use, or se

Summary of the content on the page No. 3

GENERAL SAFETY 3

Summary of the content on the page No. 4

CONTENTS SAFE INSTALLATION, USE, AND SERVICE ....................................................................................................................................... 2 GENERAL SAFETY ................................................................................................................................................................................ 3 TABLE OF CONTENTS .........................................................................................................

Summary of the content on the page No. 5

INSTALLATION REQUIREMENTS FOR THE COMMONWEALTH OF MASSACHUSETTS For all side wall terminated, horizontally vented power vent, direct vent, and power direct vent gas fueled water heaters installed in every dwelling, building or structure used in whole or in part for residential purposes, including those owned or operated by the Commonwealth and where the side wall exhaust vent termination is less than seven (7) feet above finished grade in the area of the venting, including but not limited to dec

Summary of the content on the page No. 6

6 CONNECTION DIAGRAM

Summary of the content on the page No. 7

7

Summary of the content on the page No. 8

VB/VW-500, 750 & 1000 SCHEMATIC DIAGRAM SCHEMATIC DIAGRAM 8

Summary of the content on the page No. 9

LIGHTING & OPERATION INSTRUCTIONS FOR MODELS VB/VW 500, 750 AND 1000: 9

Summary of the content on the page No. 10

children to use a hot water tap, or to draw their own bath water. Never leave a child or disabled person unattended in a bathtub or shower. The boiler should be located in an area that is inaccessible to the general public. TABLE 1. Risk of Scalds. Temperature Time to Produce 2nd & 3rd Setting Degree Burns on Adult Skin Over 170°F (77°C) Nearly instantaneous 160°F (71°C) About 1/2 second 150°F (66°C) About 1-1/2 seconds 140°F (60°C) Less than 5 seconds 130°F (54°C) About 30 seconds WATER TE

Summary of the content on the page No. 11

sequences and safety features associated with a gas ignition Pump (MCB - 120VAC - required on systems that do not have an control system. The system continuously performs various external pump): Provides electrical power to directly operate a pump diagnostic tests to verify proper appliance and control or the coil of an externally connected contactor. operation. Should an unsafe condition occur, the control will Blower (MCB - 120VAC - required): Variable speed blowers utilize shut down the burne

Summary of the content on the page No. 12

the temperature is less than the operating setpoint minus the The UIM receives commands from the user and displays differential temperature and the thermostat input is closed then operational information to the user via an LCD (liquid crystal a call for heat is established and the system shifts to the run display) up to eleven LED's, and five touch switches. The LCD mode (green "Running" LED turns on). provides information to the user by the use of 10 menu-activated screens. Within each of the

Summary of the content on the page No. 13

Summary of the content on the page No. 14

if the blower prover does not activate after 15 seconds. This 5. Press the SELECT KEY. time allows the blower relay to activate, the blower to come up 6. Use the UP and DOWN key to select the value you wish to enter. to speed, and the response from the blower prover to be filtered. 7. Press the SELECT key to accept and store the new value. • User Settings Screen: Each setpoint or user setting has either a limited selection of • High Limit Differential: values, or a limited range of values. The

Summary of the content on the page No. 15

From the Current Error Screen this key is used to reset the kBtu rating of the boiler (0 to 5750kBtu in 10kBtu increments) system from an error: The software revision level of the MCB. • Current Error Screen: • Up and Down Keys: Displays the last error that the system has detected plus a These keys are used to move upwards and downwards in time stamp of when the error occurred. (The time stamp is screens to reach a desired item and to change setpoints based on the elapsed hours value at the time

Summary of the content on the page No. 16

TROUBLESHOOTING IGNITION SYSTEM Fault Messages and Lockout Status (* = stage number: 1, 2, 3, or 4) FAULT DISPLAYED DESCRIPTION RED LED LOCKOUT “Display Fail” Communications with UIM interrupted Continuous Auto Reset Check communication cable to UIM. Try moving to other Internal Communications connector on MCB. Also check the connectors where the cable is plugged in for best connecting wires. “Comm. Fail Stg.*” Communications with FCB interrupted Continuous Auto Reset Same as above. Also try

Summary of the content on the page No. 17

PREVENTATIVE MAINTENANCE MAIN BURNER This is a pre-mix burner system. The flame is not supposed to be directly on the burner. The flame should be just above the burner Check main burner every three months for proper flame deck approximately 1/8” and blue in color, see illustration. characteristics. The main burner should display the following characteristics: • Provide complete combustion of gas. � Cause rapid ignition and carry over of flame across entire burner. � Give reasonably quiet operati

Summary of the content on the page No. 18

or on the blower and motor. Buildups of dirt and lint on the blower and motor can create excessive loads on the motor resulting in higher that normal operating temperatures and possible shortened service life. BURNER MAINTENANCE Qualified servicers should follow this procedure when the boiler’s burner needs cleaning. 1. Turn off the electrical power to the boiler and close the main manual gas shutoff valve(s). Allow the boiler parts to cool before Any safety devices including low water cutoffs

Summary of the content on the page No. 19

Summary of the content on the page No. 20

NOTES 20


Alternative user manuals
# User manual Category Download
1 A.O. Smith 000 User manual Water Heater 8
2 A.O. Smith 101 User manual Water Heater 3
3 A.O. Smith 12 40GPC T 100 User manual Water Heater 4
4 A.O. Smith 104 Series User manual Water Heater 3
5 A.O. Smith 104 - 110 User manual Water Heater 6
6 A.O. Smith 105 Series User manual Water Heater 1
7 A.O. Smith 15 User manual Water Heater 0
8 A.O. Smith 2100 User manual Water Heater 0
9 A.O. Smith 1850 User manual Water Heater 0
10 A.O. Smith 185874-001 User manual Water Heater 0
11 A.O. Smith 185762-000 User manual Water Heater 0
12 A.O. Smith 2500 User manual Water Heater 1
13 A.O. Smith 184769-000 User manual Water Heater 1
14 A.O. Smith 1300 User manual Water Heater 0
15 A.O. Smith 197835-001 User manual Water Heater 0
16 A.O. Smith 000 User manual Water Heater 8
17 A.O. Smith 101 User manual Water Heater 3
18 A.O. Smith 12 40GPC T 100 User manual Water Heater 4
19 A.O. Smith 104 Series User manual Water Heater 3
20 A.O. Smith 104 - 110 User manual Water Heater 6