Honeywell L8104D user manual

User manual for the device Honeywell L8104D

Device: Honeywell L8104D
Category: Water Heater
Manufacturer: Honeywell
Size: 1.08 MB
Added : 3/31/2013
Number of pages: 20
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Honeywell L8104D. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Honeywell L8104D.

For your convenience

If looking through the Honeywell L8104D user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Honeywell L8104D on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Honeywell L8104D to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Honeywell L8104D User manual - Online PDF
Advertisement
« Page 1 of 20 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Honeywell L8104D but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Honeywell L8104D. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

L8104A,B,C,D
Electronic Water
Heater Controllers
L8104B with
The L8104A,B,C,D Electronic Controllers pro-
Potentiometer
vide temperature control and ECO limit action for
gas water heaters.
Remote
Potentiometer
Sensing
Bulb
■ L8104A,B are used in standing pilot and electronic ■ Temperature range is factory-set to meet application
ignition systems. requirements. Maximum setting temperature is 200°F
■ L8104C,D are used only in electronic ignition sys- (93°C).
tems. ■ ECO limit setting is factory-se

Summary of the content on the page No. 2

L8104A,B,C,D SPECIFICATIONS • ORDERING INFORMATION Specifications DIFFERENTIAL: Factory set from 2 ± 0.5°F (1 ± 0.3°C) to IMPORTANT: The specifications given in this publication 15 ± 4.5°F (8 ± 2.5°C). Specify when ordering. do not include normal manufacturing tolerances. AMBIENT TEMPERATURE RANGE AT MODULE: 0°F Therefore, this unit may not exactly match the listed to +175°F (-18°C to +80°C). specifications. Also, this product is tested and cali- ECO LIMIT SWITCH: Recycling or nonrecycling (one-

Summary of the content on the page No. 3

160 100 140 L8104A,B,C,D SPECIFICATIONS DIMENSIONS: available through your Honeywell sales representative. L8104: Fig. 1. Please provide the ordering information indicated in the L8104A,B: Fig. 2. Ordering Information section to assure correct replace- L8104C,D: Fig. 3. ment components. APPROVALS: Underwriters Laboratories Inc. Component Recognized: File No. MP466, Guide No. MBPR2. Fig. 1—Approximate dimensions in in. (mm) of L8104 Remote Potentiometer and Sensing Bulb. American Gas Association

Summary of the content on the page No. 4

160 100 140 L8104A,B,C,D SPECIFICATIONS ACCESSORIES: L8104B: L8104A: 198799A Sensor Assembly: 42 in. (107 cm) 125°C 4074ENP Potentiometer Assembly: 199075A Poten- (257°F) leadwires with 1/4 in. quick connects. tiometer: Clockwise turn increases temperature, 198799B Sensor Assembly: 42 in. (107 cm) 150°C two 18 in. [46 cm] leadwires with 1/4 in. quick (302°F) leadwires with 1/4 in. quick connects. connects. Washer and nut. 198799C Sensor Assembly: 42 in. (107 cm) 105°C 4074ENS Potentiometer Assem

Summary of the content on the page No. 5

L8104A,B,C,D INSTALLATION Installation WHEN INSTALLING THIS PRODUCT… Electronic Control Module 1. Read these instructions carefully. Failure to follow Locate the electronic control module on a wall or panel them could damage the product or cause a hazardous in the wiring compartment of the water heater. The module condition. must be within easy reach of the sensor leadwires in a 2. Check the ratings given in the instructions and on location that is convenient for reading and changing the the pro

Summary of the content on the page No. 6

160 100 140 L8104A,B,C,D INSTALLATION Fig. 5—L8104A with board-mounted potentiometer in a standing pilot application. L8104A BLACK 3 SEN-1 BLACK 3 SENSING BULB WITH ECO SWITCH LOWER COM. 2 3 24V RELAY HOT 2 Q308 ONLY NO 2 ECO 1 POWER SUPPLY. PROVIDE DISCONNECT CONNECTOR MEANS AND OVERLOAD PROTECTION VR8200 AS REQUIRED. TH TR GAS VLAVE 2 1/4 IN. TAB TERMINALS (3). 1 L1 (HOT) 3 3/16 IN. TAB TERMINALS (3). M131C L2 24V Fig. 6—L8104A with remote potentiometer in an electronic ignition applicatio

Summary of the content on the page No. 7

160 100 140 L8104A,B,C,D INSTALLATION Fig. 7—L8104B with remote potentiometer in a standing pilot application. 1 SETPOINT 2 L8104B POTENTIOMETER (SHOWN FROM BACK) 2 3 POT UPPER BLACK BLACK 4 4 SEN-1 SEN-2 BLACK BLACK 4 SENSING BULB WITH 4 SENSING BULB ECO SWITCH LOWER COM. 3 4 24V RELAY HOT 3 Q308 NO ONLY 3 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED. ECO 2 FACTORY JUMPER INSTALLED, DO NOT CONNECTOR REMOVE. VR8200 TH TR GAS VLAVE 3 1/4 IN. TAB TERMINALS (3).

Summary of the content on the page No. 8

L8104A,B,C,D INSTALLATION Fig. 9—L8104C with remote-mounted potentiometer in an electronic ignition application. S8600H VENT 5 DAMPER GND 24V TH-W PLUG MV MV/PV PV (BURNER) GND 24V (OPT) SPARK (OPT) 5 MAIN PILOT COM VALVE BLACK DUAL VALVE 1ST 2ND COMBINAITON OPERATOR OPERATOR BLACK GAS CONTROL SENSING BULB 1 L8104C 2 3 2 POT SETPOINT POTENTIOMETER (SHOWN FROM BACK) BLACK SEN-1 UPPER BLACK SENSING BULB WITH ECO SWITCH LOWER SEN-2 L1 (HOT) COM. 4 L2 24V 1 Q345, Q346, Q348, PILOT Q362, Q381

Summary of the content on the page No. 9

L8104A,B,C,D INSTALLATION Fig. 10—L8104D with remote-mounted potentiometer in an electronic ignition application S8600H VENT 5 DAMPER GND 24V TH-W PLUG MV MV/PV PV (BURNER) GND 24V (OPT) (OPT) SPARK 5 MAIN COM PILOT VALVE DUAL VALVE 1ST 2ND COMBINATION OPERATOR OPERATOR GAS CONTROL 1 2 L8104D 3 2 POT SETPOINT POTENTIOMETER (SHOWN FROM BACK) BLACK SEN-1 BLACK SENSING BULB WITH ECO SWITCH LOWER L1 (HOT) COM. 4 L2 24V 1 Q345, Q346, Q348, PILOT Q362, Q381 BURNER LOAD PILOT BURNER/ GROUND PV

Summary of the content on the page No. 10

L8104A,B,C,D SETTING AND CHECKOUT Setting and Checkout SET CONTROL TEMPERATURE If the potentiometer is mounted on the control module, Fig. 11—Scale range for 3K remotely mounted potentiometer when used with L8104B Dual turn the selector knob to the desired temperature. Bulb Controller. If the potentiometer is remotely mounted, the position of the flat part of the shaft determines the approximate control 200650 POTENTIOMETER temperature. Fully counterclockwise rotation when the shaft is towards y

Summary of the content on the page No. 11

L8104A,B,C,D SETTING AND CHECKOUT • OPERATION TABLE 2—THERMISTOR RESISTANCE AT VARIOUS TEMPERATURES IN CELSIUS. Temp- Resistance (K ohms) erature (°C) 01 2 3 4 5 67 8 9 0 32648 31026 29495 28049 26682 25389 24166 23010 21915 20879 10 19898 18968 18088 17253 16461 15710 14998 14322 13680 13071 20 12492 11942 11419 10922 10450 10000 9572 9165 8778 8409 30 8057 7722 7403 7099 6808 8532 6268 6016 5775 5546 40 5327 5117 4917 4726 4543 4368 4201 4042 3889 3742 50 3602 3468 3340 3217 3099 2986 2878 2

Summary of the content on the page No. 12

L8104A,B,C,D TROUBLESHOOTING Troubleshooting If water temperature is too hot, proceed as follows: L8104A, B, C, D START DISCONNECT SENSOR LEADS FROM ELECTRONIC CONTROL MODULE AND MEASURE RESISTANCE OF SENSOR(S) WITH OHMMETER. IS RESISTANCE BETWEEN 700K AND 30K OHMS NO SENSOR(S) MAY BE SHORTED OR OPEN. (SEE TABLE 1)? CHECK FOR LOOSE, BROKEN OR SHORTED WIRES. REPLACE SENSING BULB(S) IF NECESSARY. YES SENSOR(S) OK. DISCONNECT ECO LEADS AND MEASURE RESISTANCE WITH OHMMETER. IS WATER YES REPLACE

Summary of the content on the page No. 13

L8104A,B,C,D TROUBLESHOOTING If water temperature is too cold or heater does not come on, proceed as follows: L8104A, B START CHECK VOLTAGE AT 24V TERMINALS OF ELECTRONIC CONTROL MODULE. NO CHECK TRANSFORMER, 120V SUPPLY, IS VOLTAGE BETWEEN 21.5 AND CORRECT AS NECESSARY. 28.5 VAC? YES IS THIS AN ELECTRONIC IGNITION SYSTEM WITH 100 PERCENT LOCKOUT? YES DISCONNECT 24V POWER AT IGNITION MODULE AND RECONNECT AFTER YES ABOUT 1 MIN. SET POTENTIOMETER TO IGNITION MODULE WAS IN LOCKOUT. MAX TEMPE

Summary of the content on the page No. 14

L8104A,B,C,D TROUBLESHOOTING L8104C, D YES SYSTEM SHUT DOWN DUE TO ECO IS LED LIT? OPENING. DEPRESS AND RELEASE MANUAL NO RESET BUTTON. NO DOES LED TURN OFF? CHECK VOLTAGE AT 24V TERMINALS YES OF ELECTRONIC CONTROL MODULE. NO CHECK TRANSFORMER, 120V SUPPLY, IS VOLTAGE BETWEEN 21.5 AND CORRECT AS NECESSARY. 28.5 VAC? SYSTEM RESET. YES REFER TO TROUBLESHOOTING IF WATER IS TOO HOT. IS THIS AN ELECTRONIC IGNITION SYSTEM WITH 100 PERCENT LOCKOUT? YES DISCONNECT 24V POWER AT IGNITION MODULE A

Summary of the content on the page No. 15

L8104A,B,C,D MATERIAL SAFETY DATA SHEET 15 68-0063—3

Summary of the content on the page No. 16

L8104A,B,C,D MATERIAL SAFETY DATA SHEET 68-0063—3 16

Summary of the content on the page No. 17

L8104A,B,C,D MATERIAL SAFETY DATA SHEET 17 68-0063—3

Summary of the content on the page No. 18

L8104A,B,C,D MATERIAL SAFETY DATA SHEET 68-0063—3 18

Summary of the content on the page No. 19

L8104A,B,C,D MATERIAL SAFETY DATA SHEET 19 68-0063—3

Summary of the content on the page No. 20

L8104A,B,C,D MATERIAL SAFETY DATA SHEET Home and Building Control Home and Building Control Helping You Control Your World Honeywell Inc. Honeywell Limited—Honeywell Limitée 1985 Douglas Drive North 740 Ellesmere Road Golden Valley, MN 55422 Scarborough, Ontario M1P 2V9 68-0063—3 20 Printed in U.S.A. customer.honeywell.com


Alternative user manuals
# User manual Category Download
1 Honeywell B User manual Water Heater 0
2 Honeywell AQUASTAT L6189A-C User manual Water Heater 1
3 Honeywell BH-777FTE User manual Water Heater 17
4 Honeywell Gas User manual Water Heater 6
5 Honeywell 238-47969-00A User manual Water Heater 0
6 Honeywell 238-47759-00 User manual Water Heater 0
7 Honeywell 75 GALLON ULTRA LOW NOx User manual Water Heater 0
8 Honeywell XLS-278 User manual Water Heater 4
9 Honeywell L8104A User manual Water Heater 0
10 Honeywell L4189A User manual Water Heater 9
11 Honeywell L4188A User manual Water Heater 6
12 Honeywell L8104C User manual Water Heater 0
13 Honeywell L8104B User manual Water Heater 0
14 Honeywell PDX150S*F(BN,SX,CX) User manual Water Heater 0
15 Honeywell PDX140S*F(BN,SX,CX) User manual Water Heater 0
16 A.O. Smith 000 User manual Water Heater 8
17 A.O. Smith 101 User manual Water Heater 3
18 A.O. Smith 12 40GPC T 100 User manual Water Heater 4
19 A.O. Smith 104 Series User manual Water Heater 3
20 A.O. Smith 104 - 110 User manual Water Heater 6