Our goal is to provide you with a quick access to the content of the user manual for AEG A72900GNX0. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with AEG A72900GNX0.
If looking through the AEG A72900GNX0 user manual directly on this website is not convenient for you, there are two possible solutions:
Explore the detailed user manual for AEG remarkable creation, Model A72900GNX0. Gain valuable insights and instructions to maximize your device's capabilities and optimize your user experience. Uncover the full potential of your AEG A72900GNX0 device through this comprehensive user manual, offering step-by-step guidance and expert tips for effortless operation and enjoyment.
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual AEG A72900GNX0 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to AEG A72900GNX0. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
A72900GNW0 EN FREEZER USER MANUAL
2 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly. Along with a wide range of accessories
Contents 3 CONTENTS 4 Safety information 6 Control panel 9 First use 10 Daily use 11 Helpful hints and tips 12 Care and cleaning 13 What to do if… 15 Technical data 16 Installation 20 Noises 22 Environmental concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. General information and tips Environmental information Subject to change without notice
4 Safety information SAFETY INFORMATION In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the ap- pliance are thoroughly familiar with its operation and safety features. Save these instruc- tions and make sure that they remain with the appliance if it is moved or sold, so that
Safety information 5 – thoroughly ventilate the room in which the appliance is situated • It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock. WARNING! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel to avoid hazard. 1. Power cord must not be lengthened. 2. Make sure that the power plug is not squashed or dama
6 Control panel • Never use a hair drier or other heating appliances to speed up defrosting. Excessive heat may damage the plastic interior, and humidity could enter the electric system making it live. Installation For electrical connection carefully follow the instructions given in specific paragraphs. • Unpack the appliance and check if there are damages on it. Do not connect the appli- ance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain p
Control panel 7 2 Mode button 3 OK button 4 Temperature colder button 5 Temperature warmer button 6 Display It is possible to change predefined sound of buttons to a loudly one by pressing together Mode button and Temperature colder button for some seconds. Change is reversible. Display 1 2 3 4 5 6 1 Timer function 2 FROSTMATIC function 3 Minute Minder function 4 Child Lock function 5 Alarm indicator 6 Temperature indicator Switching on To switch on the appliance do these steps: 1. Connect the m
8 Control panel After a power failure the set temperature remains stored. FROSTMATIC function To switch on the function: 1. Press the Mode button until the corresponding icon appears. The FROSTMATIC indicator flashes. The freezer temperature indicator shows symbol. 2. Press the OK button to confirm. The FROSTMATIC indicator is shown. An animation starts. This function stops automatically after 52 hours. To switch off the function before its automatic end: 1. Press the Mode button until the FROS
First use 9 It is possible to change the time during the countdown and at the end by pressing the Tem- perature colder button and the Temperature warmer button. Child Lock function To lock the buttons from unintentional operation select the Child Lock function. To switch on the function: 1. Press the Mode button until the corresponding icon appears. 2. The Child Lock indicator flashes. 3. Press the OK button to confirm. The Child Lock indicator is shown. To switch off the function: 1. Press the
10 Daily use Check that the drain hose at the rear of the cabi- net discharges into the drip tray. DAILY USE Freezing fresh food The freezer compartment is suitable for freezing fresh food and storing frozen and deep- frozen food for a long time. To freeze small amount of fresh foods it is not necessary to change the present setting. To freeze fresh food activate the FROSTMATIC function at least 24 hours before placing the food to be frozen in the freezer compartment. Place the fresh food to be
Helpful hints and tips 11 Removal of freezing baskets and glass shelves from the freezer Some of the freezing baskets have a limit stop to prevent their accidental removal or falling out. At the time of its removal from the freezer, pull the basket towards yourself and, upon reaching the end point, remove the basket by tilting its front upwards. At the time of putting it back, slightly lift the front of the basket to insert it into the freezer. Once you are over the end points, push the basket b
12 Care and cleaning • do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter; • lean foods store better and longer than fatty ones; salt reduces the storage life of food; • water ices, if consumed immediately after removal from the freezer compartment, can possibly cause the skin to be freeze burnt; • it is advisable to show the freezing in date on each individual pack to enable you to keep tab of the storage time. Hints for st
What to do if… 13 Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason use a soft cloth rinsed in warm water and neutral soap emulsion for cleaning external surfaces. Do not use detergents or abrasive paste as these will damage the paint, or stainless steel anti finger print coating. After cleaning, reconnect the equipment to the mains supply. Cleaning the ventilation grille The ventilation grille can be removed f
14 What to do if… The appliance operates discontinuously, so the stopping of compressor does not mean be- ing no current. That is why you must not touch the electrical parts of the appliance before breaking the circuit. Problem Possible cause Solution The appliance is noisy. The appliance is not supported Check if the appliance stands sta- properly. ble (all feet and wheels should be on the floor). Refer to "Levelling". The buzzer sounds. The The temperature in the freezer is Refer to "HighTempe
Technical data 15 Problem Possible cause Solution The appliance does not The appliance is switched off. Switch on the appliance. operate. The mains plug is not connected Connect the mains plug to the to the mains socket correctly. mains socket correctly. The appliance has no power. Connect another electrical appli- There is no voltage in the mains ance to the mains socket. Check socket. fuse. Contact a qualified electri- cian. The lamp does not work. The lamp is defective. Refer to "Replacing
16 Installation INSTALLATION WARNING! Read the "Safety Information" carefully for your safety and correct operation of the appli- ance before installing the appliance. Positioning Install this appliance at a location where the ambient temperature corresponds to the cli- mate class indicated on the rating plate of the appliance: Climate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C Location To ensure best performance, if the appliance is posit
Installation 17 1 2 3 5 4 The wires in the mains lead are coloured in accordance with the following code: Green and Yellow: Earth 1 Brown: Live 3 Blue: Neutral 5 As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: 1. Connect the wire coloured green and yellow to the terminal marked either with the letter “E“ or by the earth symbol or coloured green and yellow. 2. Connect the wir
18 Installation 1. Open the door. 2. Remove the transport support from the door sides. 3. Remove the transport support from the lower hinge (some models). Some models are fitted with a silencing pad under the cabinet. Do not remove this pad. 3 2 Rear spacers Install the spacers provided within the accessory bag as shown in the figure. Install the spacers on the back side of the panel. Fitting the door handles (Example for right hinge performance) The handles are supplied as a kit at delivery. 1.
Installation 19 Levelling When placing the appliance ensure that it stands level. If necessary adjust the feet using the adjust- ment spanner supplied. Door alignment is dependent on proper levelling. Door reversibility To change the opening direction of the door, do these steps: 1. Remove the plug from the power. 2. Remove the ventilation grille. Remove the upper filling and install it on the opposite side of the grille. Remove the pedal hole cover and install the cover provided in the accessor
20 Noises 5. Unscrew the hinge (B1) and remove the B1 B2 cover plate (B2) and the support (B3). Remove the cover (B4) on the opposite side and install the support (B3) the cover plate (B2) and the hinge (B1). In- stall the cover (B4) on the opposite side. B3 B4 6. Unscrew the lower hinge (C1). Move the pin to the opposite side (C2). Unscrew and move the pedal to the opposite side C3 (C3). C2 Screw on the lower hinge on the oppo- site side. 7. Tighten the pin with the adjustment spanner supplied.
|1||AEG A62900GSX0 User manual||Freezer||136|
|2||AEG A92860GNX0 User manual||Freezer||22|
|3||AEG A81000TNX0 User manual||Freezer||25|
|4||AEG AGN71800F0 User manual||Freezer||11|
|5||AEG A62900GSW0 User manual||Freezer||7|
|6||AEG A81000TNW0 User manual||Freezer||65|
|7||AEG A72900GNW0 User manual||Freezer||17|
|8||AEG A92860GNB0 User manual||Freezer||6|
|9||AEG KO_ARCTIS SUPER 2150-6GS User manual||Freezer||119|
|10||AEG AGS58200F0 User manual||Freezer||14|
|11||AEG C 7 14 40 I User manual||Freezer||4|
|12||AEG ARCTIS 75248 GA1 User manual||Freezer||79|
|13||AEG ARCTIS 75248 GA User manual||Freezer||104|
|14||AEG OKO_ARCTIS 3383 User manual||Freezer||171|
|15||AEG ARCTIS 204-4 GS User manual||Freezer||157|
|16||Edelbrock 1481 User manual||Freezer||0|
|17||Absocold Corp AFD502MW11R User manual||Freezer||2|
|18||AEG A62900GSX0 User manual||Freezer||136|
|19||AEG A92860GNX0 User manual||Freezer||22|
|20||AEG A81000TNX0 User manual||Freezer||25|