Summary of the content on the page No. 1
*
SEA-TOUCH
User’s Manual
Acknowledgements
We would like to thank you for choosing a TISSOT
watch, a Swiss brand among the most highly renowned
in the world. Your SEA-TOUCH watch has the most
recent technical innovations. It gives you a constant
analogue time display and a variety of digital displays.
In addition, the following functions can be accessed
simply by touching the glass: Alarm, Compass,
Temperature, Dive, Logbook, Chronograph.
1/12
www.tissot.ch 145_EN
Summary of the content on the page No. 2
Official service centers adresses www.tissot.ch WARNING TISSOT TACTILE WATCHES MUST ONLY BE SERVICED BY TISSOT’S AUTHORIZED CUSTOMER SERVICE CENTERS, WHICH ARE LOCATED IN OVER 160 COUNTRIES Recommended service prices support.tissot.ch
Summary of the content on the page No. 3
SEA-TOUCH * FUNCTIONS 2nd function 1st function 1st function 2nd function N W E CAL S + ACTIVATE ACTIVATE TOUCH- LIGHT NEW-YORK LONDON 27 december SENSITIVE OPT T2 T1 GLASS - 27° Time zone 1 Time zone 2 Water resistance: 10 bar (100 m / 330 ft) Ante meridien Post meridien Battery type: button-type lithium-manganese Low battery Error - Contact service center dioxide primary battery cell. Touch-sensitive glass active N Activate touch-sensitive glass / Activate light W E COMPASS - Compass 7 S
Summary of the content on the page No. 4
SEA-TOUCH * GENERAL USER INFORMATION Activating the touch-sensitive glass Activating the light Setting mode Display mode Activate the glass 2 sec. 1 sec. 2 sec. The display light will stay on for 5 seconds. Date display = Default display Select a function When the glass is activated, the symbol will flash on the digital Time 1 display: T1 or display. If the watch is not manipulated, Time 2 display: T2 it will automatically deactivate after : move display and/or hand 15 seconds. po
Summary of the content on the page No. 5
SEA-TOUCH * READING > OPTIONS OPT 1 sec. Activate glass Options display Switch to sub-menus: Beep display Automatic switch to standby (see page 4) Units display mode after 10 seconds Beep every second Back to units display At any time: exit sub-menu – back to date display SETTING > UNITS OPT 2 sec. or Units display Setting mode Select mode 12/24 hours – in Select Mode " º C " or " º F " Validate setting. 12 hour mode, AM or PM Selecting 12 hour mode appears in the display below displays th
Summary of the content on the page No. 6
SEA-TOUCH * SETTING > STANDBY OPT Standby mode is a battery economy mode. All the functions are deactivated, with only the time & date counters updated. This mode economises the battery when the watch is not being worn. a) The watch is in standby Back to time & date mode Automatic switch to standby mode after 10 seconds Beep every second or Back to time & date mode b) / : stop the count, the watch does not switch to standby mode SETTING > SYNCHRONISATION OPT The watch needs to be synchroni
Summary of the content on the page No. 7
SEA-TOUCH * ALARM The alarm is associated with time T1. An alarm lasts 30 seconds, without repeating. When the programmed time is reached, you can stop the alarm by pressing one of the push-buttons. Stop alarm or 1 sec. or Activate glass Alarm display Alarm ring Stop alarm SETTING > ALARM 2 sec. or 1 sec. or : time forward Alarm display Activate or deactivate alarm Setting mode Validate setting : time backward N W E COMPASS S The minutes hand points to geographic North, factoring in the mag
Summary of the content on the page No. 8
SEA-TOUCH * SETTING > COMPASS > COMPASS CALIBRATION CAL 2 sec. Turn the watch more than a complete revolution on a horizontal surface (e.g. a table) in an environment free from magnetic interference, at Compass Activate calibration mode a rotation speed of around 30° per second. Calibration display – glass deactivated during calibration Total time: 20 seconds maximum N S a) Calibration successful – b) Calibration failed – Back to compass display data stored repeat calibration N W E G
Summary of the content on the page No. 9
SEA-TOUCH * THERMOMETER GLOSSARY > THERMOMETER 27° 27° Description of function In thermometer mode, your SEA-TOUCH T˚ displays the ambient temperature. Explanations The temperature displayed corresponds to 1 sec. that of the watch case, so this temperature T˚ is influenced by your body temperature. That is why the temperature displayed may differ from the ambient temperature. T˚ To display the actual ambient temperature, the watch needs to be taken off for 15 to 30 minutes, in order to b
Summary of the content on the page No. 10
SEA-TOUCH * DIVE > AUTOMATIC START & STOP The watch automatically starts the dive mode at the latest 5 seconds after the depth limit of 1 m 40 (4.5 feet). The dive is saved in the logbook if the dive lasts more than 15 seconds. Dive Suspension Dive stopped 1 2 4.5 feet 1.40 m Automatic start of dive Dive mode active - elapsed Diver comes back to surface Maximum dive time of 3 hours Maximum dive depth is mode below depth time in LCD, minutes hand (above depth of 59 m / 189 ft. of 1.40 m
Summary of the content on the page No. 11
SEA-TOUCH * LOGBOOK For all steps, if no manipulation of watch during 15 seconds, the glass desactivates and display shows LOG. 1 sec. Activate glass LOGBOOK display LOGBOOK display LOGBOOK display choose by date choose by max. depth choose best dive or or or Choose date Choose max. depth Date & dive duration or or or Choose dive time Date Time on chosen date or or or Choose max. depth Time Max. depth & dive duration & dive duration PAUSE STOP REWIND Simulation Presaved dive simulation 0
Summary of the content on the page No. 12
SEA-TOUCH * CHRONO Resolution: 1/100 sec / Measurement range: 99 hrs 59’59’’ and 99/100 sec 1 sec. Activate glass Chrono display Start chrono Stop chrono Split (partial time) Reset Start chrono a) Flashing stop with partial b) Restart the chrono Stop chrono Reset chrono time displayed, and chrono counting the elapsed time running in background WARNINGS Battery type: button-type lithium-manganese dioxide primary battery cell. Your TISSOT SEA-TOUCH is NOT a scuba-diving watch and the measurements
