Makita 9524NB user manual

User manual for the device Makita 9524NB

Device: Makita 9524NB
Category: Grinder
Manufacturer: Makita
Size: 0.22 MB
Added : 7/20/2013
Number of pages: 16
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Makita 9524NB. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Makita 9524NB.

For your convenience

If looking through the Makita 9524NB user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Makita 9524NB on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Makita 9524NB to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Makita 9524NB User manual - Online PDF
Advertisement
« Page 1 of 16 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Makita 9524NB but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Makita 9524NB. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Angle Grinder
100 mm (4”)
MODEL 9523NBH
115 mm (4-1/2”)
MODEL 9524NB
125 mm (5”)
MODEL 9525NB
DOUBLE
INSULATION
INSTR U CTION MANU AL
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Summary of the content on the page No. 2

SPECIFICATIONS Model 9523NBH 9524NB 9525NB No load speed (RPM) 11,000/min 11,000/min 10,000/min Overall length 256 mm (10”) 256 mm (10”) 256 mm (10”) Net weight 1.4 kg (3.1 lbs) 1.4 kg (3.1 lbs) 1.4 kg (3.1 lbs) Spindle thread M10 x 1.25 5/8” 5/8” • Manufacturer reserves the right to change specifications without notice.  Specifications may differ from country to country. GENERAL SAFETY RULES USA002-2 (For All Tools) WARNING: Read and understand all instructions. Failure to follow all instructi

Summary of the content on the page No. 3

5. Avoid body contact with grounded sur- be used for appropriate conditions. Ordinary faces such as pipes, radiators, ranges and eye or sun glasses are NOT eye protection. refrigerators. There is an increased risk of Tool Use and Care electric shock if your body is grounded. 15. Use clamps or other practical way to 6. Do not expose power tools to rain or wet secure and support the workpiece to a conditions. Water entering a power tool will stable platform. Holding the work by hand or increase th

Summary of the content on the page No. 4

24. When servicing a tool, use only identical Use of unauthorized parts or failure to follow replacement parts. Follow instructions in Maintenance instructions may create a risk of the Maintenance section of this manual. electric shock or injury. USE PROPER EXTENSION CORD: Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in l

Summary of the content on the page No. 5

8. Be careful not to damage the spindle, the poor installation or a poorly balanced flange (especially the installing surface) wheel. or the lock nut. Damage to these parts 15. Use the specified surface of the wheel to could result in wheel breakage. perform the grinding. 9. NEVER use tool with wood cutting blades 16. Watch out for flying sparks. Hold the tool or other sawblades. Such blades when so that sparks fly away from you and other used on a grinder frequently kick and persons or flammabl

Summary of the content on the page No. 6

FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. 001020 Shaft lock CAUTION: 1 • Never actuate the shaft lock when the spindle is moving. The tool may be damaged. Press the shaft lock to prevent spindle rotation when install- ing or removing accessories. 1. Shaft lock 001033 Switch action 1 CAUTION: • Before plugging in the tool, always check to see that the slide switch actuates properly and returns t

Summary of the content on the page No. 7

001060 Installing or removing wheel guard 9523NBH 1 CAUTION: 2 • When using a depressed center grinding wheel/Multi- 3 disc, flex wheel, wire wheel brush or cut-off wheel, the wheel guard must be fitted on the tool so that the closed side of the guard always points toward the operator. Mount the wheel guard with the protrusion on the wheel 1. Wheel guard guard band aligned with the notch on the bearing box. Then 2. Bearing box 3. Screw rotate the wheel guard around 180 degrees. Be sure to tighte

Summary of the content on the page No. 8

001094 Installing or removing flex wheel 1 (optional accessory) 2 3 WARNING: 4 • Always use supplied guard when flex wheel is on tool. Wheel can shatter during use and guard helps to reduce chances of personal injury. Follow instructions for depressed center grinding wheel/ 1. Lock nut Multi-disc but also use plastic pad over wheel. See order of 2. Flex wheel 3. Plastic pad assembly on accessories page in this manual. 4. Inner flange 001105 Installing or removing abrasive disc 1 (optional acce

Summary of the content on the page No. 9

CAUTION: • After operation, always switch off the tool and wait until the wheel has come to a complete stop before putting the tool down. 001120 Grinding and sanding operation ALWAYS hold the tool firmly with one hand on housing and the other on the side handle. Turn the tool on and then apply the wheel or disc to the workpiece. In general, keep the edge of the wheel or disc at an angle of 15˚ about 15 degrees to the workpiece surface. AB During the break-in period with a new wheel, do not work

Summary of the content on the page No. 10

• ALWAYS use guard with wire wheel brushes, assuring diameter of wheel fits inside guard. Wheel can shatter during use and guard helps to reduce chances of personal injury. Unplug tool and place it upside down allowing easy access to spindle. Remove any accessories on spindle. Thread wire wheel brush onto spindle and tighten with the wrenches. When using wire wheel brush, avoid applying too much pres- sure which causes over bending of wires, leading to prema- ture breakage. 001619 Operation with

Summary of the content on the page No. 11

001145 Replacing carbon brushes Remove and check the carbon brushes regularly. Replace when they wear down to the limit mark. Keep the carbon brushes clean and free to slip in the holders. Both carbon brushes should be replaced at the same time. Use only iden- tical carbon brushes. 1 1. Limit mark 001147 Use a screwdriver to remove the brush holder caps. Take out the worn carbon brushes, insert the new ones and secure the brush holder caps. To maintain product SAFETY and RELIABILITY, repairs, an

Summary of the content on the page No. 12

001179 1 222 8 12 13 3 3 9 11 3 4 6 10 14 5 7 5 5 9523NBH 9524NB 9525NB 1 Grip 36 2 Wheel guard 3 Inner flange 35 Inner flange 45 Inner flange 45 4 Depressed center grinding wheel/Multi-disc 5 Lock nut 10-35 Lock nut 5/8-45 Lock nut 5/8-45 6 Plastic pad N/A N/A 7 Flex wheel N/A N/A 8 Rubber pad 76 Rubber pad 100 Rubber pad 115 9 Abrasive disc 10 Sanding lock nut 10-30 Sanding lock nut 5/8-48 Sanding lock nut 5/8-48 11 Wire wheel brush 12 Wire cup brush 13 Wheel guard (For cut-off wheel) 14 Cut-o

Summary of the content on the page No. 13

Stamp Timbre Makita Canada Inc. 1950 Forbes Street, Whitby, Ontario L1N 7B7 Fold 13 Cut

Summary of the content on the page No. 14

Your answers to the following questions are appreciated. 1. This product was purchased from? 3. How did you first learn of Makita Power Tools? Hardware/lumber Store Industrial Supply Magazine/Newspaper Catalog Tool Distributor Other ( ) From dealer Other ( ) Store display 2. Use of the product is intended for? 4. Most favored points are? Construction trade Home maintenance Design Makita Brand Industrial maintenance Other ( ) Features Power Size

Summary of the content on the page No. 15

Factory Service Centres Head Office: 1950 Forbes St., Whitby, Ontario, L1N 7B7 (905) 571 - 2200 1-800-263-3734 Regional Office: 11771 Hammersmith Way, Richmond B.C. V7A 5H6 (604) 272 - 3104 1-800-663-0909 Regional Office: 6389 boul. Couture, St. Leonard, Quebec (Montreal) H1P 3J5 (514) 323 - 1223 1-800-361-7049 Dartmouth: 202 Brownlow Avenue Dartmouth, N.S., B3B 1T5 (902) 468 - 7064 1-888-625-4821 Ville St. Laurent: 1140 Rue Bégin, Ville St. Laurent, Quebec (Montreal) H4R 1X1 (514) 745 -

Summary of the content on the page No. 16

MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one year period, return the COMPLETE tool, freight prepaid, to one of Makita’s Factory or Authorized Service Centres. If inspection shows the trouble is caused by defective workmanship or material, M


Alternative user manuals
# User manual Category Download
1 Makita 9005BZ User manual Grinder 0
2 Makita 9016B User manual Grinder 6
3 Makita 9005BY User manual Grinder 0
4 Makita 9015B User manual Grinder 5
5 Makita 9015A User manual Grinder 0
6 Makita 9006B User manual Grinder 4
7 Makita 9049 User manual Grinder 18
8 Makita 9067L User manual Grinder 2
9 Makita 906H 003485 User manual Grinder 4
10 Makita 9067DB User manual Grinder 0
11 Makita 9069 User manual Grinder 25
12 Makita 9015A(MJ) User manual Grinder 0
13 Makita 906H User manual Grinder 1
14 Makita 90471 User manual Grinder 1
15 Makita 9500D User manual Grinder 4
16 Alpha Tool.Com.HK Limited hsg-125 User manual Grinder 1
17 Astro Pneumatic 1222 User manual Grinder 8
18 Baldor Electric Company280F User manual Grinder 5
19 Alpha Tool.Com.HK Limited 225 User manual Grinder 1
20 Black & Decker 478306-00 User manual Grinder 0