Aruba Spa 2003 Escape user manual

User manual for the device Aruba Spa 2003 Escape

Device: Aruba Spa 2003 Escape
Category: Hot Tub
Manufacturer: Aruba Spa
Size: 0.25 MB
Added : 5/25/2013
Number of pages: 39
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Aruba Spa 2003 Escape. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Aruba Spa 2003 Escape.

For your convenience

If looking through the Aruba Spa 2003 Escape user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Aruba Spa 2003 Escape on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Aruba Spa 2003 Escape to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Aruba Spa 2003 Escape User manual - Online PDF
Advertisement
« Page 1 of 39 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Aruba Spa 2003 Escape but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Aruba Spa 2003 Escape. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

OWNERS
OWNERS
MANUAL
MANUAL
ARUBA SPAS
Box 2266 Station R
Kelowna, BC V1X 4K6
1-800-609-2227

Summary of the content on the page No. 2

TABLE OF CONTENTS TABLE OF CONTENTS Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 How Your Aruba Spa is Built . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Tools Required For Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Items Required For The Installation Of Your Spa . . . . . . . . . .

Summary of the content on the page No. 3

how to do best is build spas. INTRODUCTION INTRODUCTION We have learned that quality Dear Aruba Customer, Dear Aruba Customer, through simplicity is the best way to build a spa. We Thank you for purchasing an believe that knowing how Aruba Spa. At Aruba Spas your spa is built will make our philosophy is simple, installing and operating it build the best spa, back it easier, so the first part of this with an excellent warranty manual explains how your and with comprehensive spa is built. Pleas

Summary of the content on the page No. 4

HOW YOUR ARUBA SPA IS BUILT HOW YOUR ARUBA SPA IS BUILT At Aruba, building spas is our passion. We believe that qual- ity through simplicity is the best way to build a spa. Over the years we have refined our spa construction process to achieve the best results. We are proud of the results that we have achieved using the methods described below and hope that knowing how your spa is made will make installing and operating it easier. The building process starts with the shell of the spa. At Arub

Summary of the content on the page No. 5

are then custom fitted by hand to the areas underneath the seats and stairs to provide additional strength to these areas. This process recognizes that every spa is not identical and ensures individual inspection and custom fitting of each spa. The spa shell is then insulated with 2 LB closed cell foam. As Aruba Spas are made in Canada we know Canadian weath- er conditions. With this in mind we use enough insulation to get the maximum obtainable R factor from our insulating foam. The use of c

Summary of the content on the page No. 6

TOOLS REQUIRED FOR INSTALLATION • Voltmeter • Ammeter • Ohmmeter • Screwdrivers (Phillips & flat head) • 2 wire restrainers • Wire cutters • Wire strippers • #6 AWG 3 wire Chg: (plus ground) if spa is more than 30ft from the Main Breaker Box. ITEMS REQUIRED FOR THE INSTALLATION OF YOUR SPA • At least four people are required at time of delivery to place your spa into position. • 220 Volt Electrical Service • An Electrician to do the electrical connection. • 50 Amp GFCI circuit breaker. (see pag

Summary of the content on the page No. 7

IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 1) Children should not use spas 10) Do not use a spa or hot tub or hot tubs without adult super- immediately following strenu- vision. ous exercise. 2) Do not use spas or hot tubs 11) Prolonged immersion in a unless all suction guards are spa or hot tub may be injurious installed to prevent body hair to you health. entrapment. 12) Do not permit electric appli- 3) People using medications ances (such as light, telephone, and/or who have

Summary of the content on the page No. 8

POSITIONING YOUR SPA POSITIONING YOUR SPA Your spa is self-contained. You can place it on a deck, patio, in your yard, or indoors. Proper site location is an important element of the overall enjoyment of your new spa, so make sure you take enough time to properly plan out the position- ing of your spa. The following information is provided to help you determine where to place your spa. If you have any questions or concerns about where to locate your spa, please contact our customer service de

Summary of the content on the page No. 9

WARNING Do not permit electric appliances (such as light, telephone, radio, or television) within 1.5 meters (5 feet) of a spa or hot tub. INDOOR INSTALLATION Before attempting to place the spa indoors check the door openings to ensure that they are large enough for the spa to fit through. In addition, you must have the structure checked for its loading capacity by an Engineer or competent Contractor. The minimum loading capacity required is 100 lbs per square foot. The spa should be placed in

Summary of the content on the page No. 10

WARNING Electrical codes change from Province to Province. Check with your electrician for the electrical codes in your area. ELECTRICAL CONNECTION ELECTRICAL CONNECTION A certified electrician must make all electrical connections to your spa, in accordance with all applicable electrical codes for your area. The spa’s GFCI breaker must be sized in accor- dance to electrical requirements of spa. The Full Load Amperage (FLA) is recorded on the spa’s nameplate. WARNING Failure to use a GFCI breaker

Summary of the content on the page No. 11

supply service panel with a continuous copper wire equiva- lent in size to the circuit conductors supplying this equip- ment. 3. At least two lugs marked “Bonding Lugs” are provided on the external surface or inside the supply terminal box. To reduce the risk of electric shock, connect the local common bonding grid in the area of the spa to these terminals with an insulated or bare copper conductor not smaller than #6 AWG. 4. All field installed metal components such as rails, ladders, drains

Summary of the content on the page No. 12

2) Check all four unions (or six if you have a circulating sys- tem) and ensure that they are hand tight. There are two white unions on the pump: one on the inlet side and one on the dis- charge side. See equipment diagram. Knife Valve #1 Knife Valve #2 Pump Union #1 SPA PACK White Black Union #2 Unions Unions Hose Bib There are also two black unions located on each end of the stainless steel heater barrel. The unions can come lose during shipping, and may need to be tightened. Do not over tigh

Summary of the content on the page No. 13

HAZARD This system should be set to maintain a water temperature NO GREATER THAN 40° CELSIUS (104° F). 1) Make sure all of the jets are in the full open position, (refer to Hydrotherapy Jets, page 13). 2) The Electronic Operating System spa control has automat- ic functions that operate upon start-up and normal operation to protect the system. Power up system and “Pur” will appear for 30 seconds while system is in purge mode then normal operation will resume. 3) With the breaker in the “On” pos

Summary of the content on the page No. 14

icals to adjust the water balance (see Chemical Maintenance, page 19). 7) The spa pack is thoroughly tested before shipping. The most common cause of immediate pack failure is dry firing (this occurs if the pump is running and the water is not cir- culating) and this type of failure is not covered by warranty. 8) If you experience any problems with the procedures above contact an Aruba customer service representative. 9) After your spa is operational you must install the Spa Cover latches. The

Summary of the content on the page No. 15

Pump button Pump button The control panel button designated “PUMP” activates the pump when pressed. The pump sequence is low speed, high speed, off. The pump, when the “PUMP” button is manual- ly pressed, turns off after thirty minutes (a thirty-minute default). NOTE: You will not be able to turn off your pump if your spa is in a filter cycle, heating, or in freeze protection (less than 52°F). Light Light The control panel button designated “LIGHT” activates the spa light when pressed. The ligh

Summary of the content on the page No. 16

HYDROTHERAPY JETS Your spa is equipped with the follow- ing jets: You can adjust the volume of water from these jets by turning the face Adjustable jets Adjustable jets plate clock wise to decrease the vol- ume of water and counter clock wise to increase it. You can also change the direction of the water flow by pushing on the side of the small orifice in the centre of the trim kit. Micro Directional Micro Directional WARNING: All jet trim kits must be properly seated or air flow may be restric

Summary of the content on the page No. 17

The cluster jets are small single orifice jets that are not adjustable and cannot be removed. Cluster Jets Cluster Jets The purpose of the ozone jet is to inject ozone into your spa. It is not to be used for hydrotherapy. If you do not have an ozona- tor water will still flow into the spa from Ozone Jet Ozone Jet this jet. WARNING Do not block Ozone Jet at anytime. Blocking the Ozone Jet may result in damaging the ozonator and voiding the warranty. You can adjust the volume of water from both th

Summary of the content on the page No. 18

CHILD LOCKOUT (LOC) This special feature is used to prevent unauthorized use of the spa. This system incorporates a unique panel locking system which disables the controls on the panel. The temper- ature readout flashes in this function. You can enable the lockout function by pressing the Heat key and Light key at the same time. You can disable the lockout function by doing the same. OZONATORS-OPTIONAL IMPORTANT It is necessary to use Chlorine or Bromine chemical treatment with an ozonator. WA

Summary of the content on the page No. 19

TROUBLE SHOOTING This is a self-diagnostic control system. The system will automatically display an alphanumeric symbol if a problem is detected. No display at topside No display at topside - Check that the topside is correctly plugged into spa pack. - Check the breaker - Check that connection to main board is clean and sound Display flashes "th1/39" on system start up Display flashes "th1/39" on system start up - Check that the temperature sensing probe connection to main board is clean and

Summary of the content on the page No. 20

Display flashes "FLO" (FLOW) Display flashes "FLO" (FLOW) - This indicates that there is a water flow problem or defective pressure switch. - You may have an air lock at the heater barrel. See page 11 for priming the pump. - Make sure filters are clean - Check that service valves are open - Ensure water level is at water line - Check for obstruction of flow Display flashes "FLC" Display flashes "FLC" - This indicates that the flow switch is stuck in the closed position and should be replaced. Er


Alternative user manuals
# User manual Category Download
1 Aruba Spa 2003 Breeze User manual Hot Tub 45
2 Aruba Spa 2003 Serenade User manual Hot Tub 17
3 Aruba Spa Models 2003 User manual Hot Tub 29
4 ActiveForever.com CL 250-C User manual Hot Tub 1
5 ActiveForever.com CL 100-C User manual Hot Tub 1
6 ActiveForever.com SPA2GO STG-1 User manual Hot Tub 13
7 American Standard 047186-0070A User manual Hot Tub 5
8 American Standard 1748.118C User manual Hot Tub 2
9 American Standard 155 User manual Hot Tub 4
10 Alps Electric Ciara XLS User manual Hot Tub 13
11 American Standard 1748.218C User manual Hot Tub 3
12 American Standard 1748.118 User manual Hot Tub 1
13 Alps Electric Teton XLS User manual Hot Tub 1
14 Alps Electric Tigra XLS User manual Hot Tub 0
15 ActiveForever.com CL 250-CSIMW User manual Hot Tub 1