Summary of the content on the page No. 1
User's manual
XQB70-10
Full Automatic Washing Machine
Contents
Before using
Names of the parts.............the 2nd cover
Safety precautions .......................1
Introduction of the special functions.........3
Installation and adjustment ..................3
Install the water inlet hose............5
Using process
Preparation before washing .............7
Put in the laundries .........................8
Put in the detergent .......................9
Use the operation but
Summary of the content on the page No. 2
Before Using Before Using Names of the parts Honourable users, Thank you for choosing our products. Our products integrate high-tech, precision,frontier science.To facilitate using it, please read this manual carefully and operate this machine according to it. Top lid A Top lid B water valve Sop mat Detergent box Cabinet handle Drain hose Lint filter Control panel Filter cover Power line Inner tub Control panel film Pulsator Adjustable foot back cover seam Cabinet fixed foot (3) base fra
Summary of the content on the page No. 3
Before Using Before Using Safety precautions Please insert the power cord into special rece- The power cord plug should be convenient ptacle with rated voltage.If the power cord is to be pluged in or pluged out with hand three-phase wire,please use three-phase rec- while the washing machine runs normally. eptacle.The earthing terminal of the receptacle Be sure to pull the plug out and close the must be earthed reliably.If it is two-phase wire, water tap when the machine is idle,when please guara
Summary of the content on the page No. 4
Before Using Before Using Do not stretch hands into the working Do not decompose, repair or alter the machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of the children.Do not let the children climb the washing machine. Do not put any hot or heavy items (such Do not wash laundries with volatile as the kettle with hot water ) on the materials (such as thinner, petrol etc.) washing machine. The handicapped or children without Ke
Summary of the content on the page No. 5
Special functions Before Using Before Using "Hand scrub" wash: The drum and pulsator rotate in opposite directions to form a washing water flow similar to hand scrubbing movement, and meanwhile the drum inner wall also take a share in washing, which obviously increase the washing intensity. Open-cover alarm function During washing cycle except the processes of water filling and draining, the washing machine will stop operation and automatically alarm if the top cover is opened. Installation and
Summary of the content on the page No. 6
Before Using Before Using How to change the direction of the drain hose 1.Lean the machine down gently with the front 3.Extend the drain hose from the left side. Push the drain hose into the groove with hands. surface facing the ground. Loosen the eight screws by a cross screwdriver. Bottom plate Back Push the drain hose Front into the groove with hands at this point Soft item 2.Pull out the drain hose from the groove at the right side. 4.Install the bottom plate (as per indi
Summary of the content on the page No. 7
Before Using Before Using Install the water inlet hose Confirm the water tap Water tap,not suitable Water tap,suitable Outlet end surface >10mm It is required that the front end shall be longer than 10mm. The outlet end surface of the tap shall be flat and smooth. If not please file it to avoid leakage. Connection between the water inlet hose jointer and the water tap 1.Press the lower end of the lock lever and push down the slider. Take off the water inlet hose jointer from the water inle
Summary of the content on the page No. 8
Before Using Before Using Connection between the water inlet hose and the washing machine 1.Do not take off the water absorption Nut of the water inlet hose cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut of the water inlet hose on the valve jointer. 3.Fasten the nut. Swaying it gently to Water absorption cushion confirm if it's suitable. Jointer of the water inle
Summary of the content on the page No. 9
Using process Using process 1 Preparation before washing Preparation before washing 1.Connect the water inlet hose and open the water tap . 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose. Pay attention to followings before washing the laundries Confirm if Clear the pocket. Fasten the The quantity of When the pulsator there's special
Summary of the content on the page No. 10
Using process Using process 2 Put in the laundries The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. One time washing quantity shall be lower than the rated capacity. The largest capacity of this machine is 7.0kg. The thickness, size, type of the cloth will influence the actual washing capacity. It is suitable for one time washing to put in reasonable amount of laundries and
Summary of the content on the page No. 11
Using process Using process 3 Put in the detergent How to use the washing powder Direct dissolved in the machine 1.Fill water to "Low" water level. 2.Add the power. Run for 30 seconds Inlet box of the detergent to dissolve it completely. 3.Put in the laundries. Select suitable water level. The instant dissolving of the washing How to use the whitener powder: 1.Prepare warm water of 30 and a Fill water to decided level. Dilute container. the whitener with container. Pour 2.Add the powder while s
Summary of the content on the page No. 12
Using process Using process 4 Use the operation buttons a. Description of the function of the buttons Mode and meaning of the indicator light Flashing: indicate the running program On: indicate the program about to run, or indicate the selected mode Flashing rapidly: indicate abnormal condition . 9 10 7 8 STANDARD SOAK 5 6 JEANS WASH 3 4 GENTLE RINSE 1 2 QUICK WASH SPIN Water level Program Selection Selection Procedure Selection Water level button The user selects a suitable water level
Summary of the content on the page No. 13
Using process Using process "Start/Pause"button "Power On/Off"button After the power is switched on, press it to Press "Power On/Off" button to connect start the machine power supply. During working, push it to pause working. After power is connected, pressing this During pause, push this button to restart button will cut off the supply. and continue operation. Nixie tube To indicate -- during sensing. To indicate remaining min. During program running. To indicate remaining reserved
Summary of the content on the page No. 14
Using process Using process Operating procedure and explanations for the b. buttons 9 10 7 8 NORMAL SOAK 5 6 BIG CLOTHING WASH XQB70-10 3 4 GENTLE RINSE 1 2 QUICK WASH SPIN POWER ON / OFF WATER START LEVEL PROGRAM PAUSE SELECTION SELECTION PROCEDURE RESERVATION SELECTION 1 Press the "Power On/Off" button to switch on the power supply Power On/Off 2 Press the button of "Program Selection" to select a suitable full-automatic program Program selection After switching on, the "Standard" progr
Summary of the content on the page No. 15
Using process Using process Attention Even there's no water in the tub, the spinning will start after a certain period. Do not use soak process for woolen laundries. Wash the laundries that are prone to lose colors separately from other laundries. The pulsator will not rotate unless the water is filled to selected water level. Selection method of the procedure programs Times of pushing Selected procedure Contents(the lighted indicators Applicable procedure the"select"button program indicate t
Summary of the content on the page No. 16
Using process Using process Time list of each program (minute) Wash Rinse Spin Water Program Total time(min) (min) (min) (min) level Standard 1~10 Rinse twice,each about 4 About 35~47 About 6 Jeans Rinse twice, each abut 4 About 35~48 1~10 About 5.5~6.5 About 10 About 2 Gentle About 4 About 3 Rinse once, about 4 Quick Rinse twice, about 4 About 2 About 3 About 24 1~10 Total time: including the normal water inlet time, drain time, excluding the power off time. The total washing time may be influe
Summary of the content on the page No. 17
Using process Using process Time list of each program (minute) Wash Rinse Spin Water Program Total time(min) (min) (min) (min) level Standard 1~10 Rinse twice,each about 4 About 35~47 About 6 Jeans Rinse twice, each abut 4 About 35~48 1~10 About 5.5~6.5 About 10 About 2 Gentle About 4 About 3 Rinse once, about 4 Quick Rinse twice, about 4 About 2 About 3 About 24 1~10 Total time: including the normal water inlet time, drain time, excluding the power off time. The total washing time may be influe
Summary of the content on the page No. 18
Trouble shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena The reason How to settle Buzzing upon reservation starts, The top lid is not closed Close the top lid Nixie tube indic
Summary of the content on the page No. 19
Common phenomena Phenomena Explanation The spinning is intermittent when it starts. Balance the laundries to avoid slanting. Push the "Procedure selection" button to The program is setting the drain time. Some time is select "Spin", but it doesn't work. needed before it starts spinning. There may be some water flowing out of It is the water remained in the factory inspection of the drain hose in the first use of the machine. performance. While wa
Summary of the content on the page No. 20
Specification Specification Model XQB70-10 220V~ 50Hz Rated voltage frequency 7.0kg (weight of standard dry cloth) Rated washing / spinning capacity Water level/Water quantity (about) About 126L (High water level; Standard program) Max water consumption 0.03MPa-0.78MPa pressure 350W Rated washing power Rated spinning power 255W Weight About 26kg Dimension L 537mm W 520mm H 890mm
